The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device
Abstract
Abstract Incorporating inorganic thermoelectric fillers into conductive polymers is one promising strategy to develop high-performance flexible thermoelectric films. However, due to the relatively high interfacial contact resistance between fillers and polymers, carriers tend to be scattered at the interfaces during the interfacial transports, which deteriorates the electrical properties of the system, and in turn leads to low energy conversion efficiency. Here, a new strategy is developed to optimize interfacial carrier transports in Bi0.5Sb1.5Te3/PEDOT:PSS composite, by coating Bi0.5Sb1.5Te3 fillers with highly conductive CuTe layer. With highly crystallized PEDOT:PSS prepared as the matrix, high-performance Cu-Bi0.5Sb1.5Te3 /PEDOT:PSS film is fabricated with promising σ of ~2300 S cm−1 and peak S2σ of 312 µW m−1 K−2 at room temperature, which reaches to a record-high value in the reported Bi0.5Sb1.5Te3/PEDOT:PSS composites. Accordingly, a home-made flexible thermoelectric device is fabricated using our prepared composites, generating a promising open-circuit thermovoltage of ~7.7 mV with the human wrist as the thermal source. This study addresses the significance of interfacial carrier transport, hinting the bright prospects of cheap conductive polymers as the effective power source of wearable electronics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Engineered doping of organic semiconductors for enhanced thermoelectric efficiency
Kim, G.-H., Shao, L., Zhang, K., & Pipe, K. P. (2013) · Nature Materials · doi:10.1038/nmat3635 · Cited by 1,688
Cited by
Advanced Thermoelectric Design: From Materials and Structures to Devices
Shi, X.-L., Zou, J., & Chen, Z.-G. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00026 · Cited by 2,524
Self-citationWearable Thermoelectric Materials and Devices for Self‐Powered Electronic Systems
Jia, Y., Jiang, Q., Sun, H., Liu, P., Hu, D., Pei, Y., Liu, W., Crispin, X., Fabiano, S., Ma, Y., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102990 · Cited by 600
Self-citationFlexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Self-citationAdvances in the design and assembly of flexible thermoelectric device
Cao, T., Shi, X.-L., & Chen, Z.-G. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101003 · Cited by 387
Self-citationXu, S., Shi, X.-L., Dargusch, M., Di, C., Zou, J., & Chen, Z.-G. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100840 · Cited by 315
Self-citation
Metadata
- Authors
- Wang, Y., Hong, M., Liu, W.-D., Shi, X.-L., Xu, S.-D., Sun, Q., Gao, H., Lu, S., Zou, J., & Chen, Z.-G.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2020-10
- Volume
- 397
- Pages
- 125360
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3023749910
- Cited by
- 162
- References
- 1
- FWCI
- 10.16
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device. https://app.cochat.ai/papers/10.1016/j.cej.2020.125360
- The paper
- Wang, Y., Hong, M., Liu, W.-D., Shi, X.-L., Xu, S.-D., Sun, Q., Gao, H., Lu, S., Zou, J., & Chen, Z.-G. (2020). Bi0.5Sb1.5Te3/PEDOT:PSS-based flexible thermoelectric film and device. Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.125360
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.