The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Fluorescent chitosan-based hydrogel incorporating titanate and cellulose nanofibers modified with carbon dots for adsorption and detection of Cr(VI)
Abstract
Abstract To deal with heavy metal pollution, a novel fluorescent chitosan-based hydrogel incorporating titanate and cellulose nanofibers modified with carbon dots was prepared to effectively detect and remove Cr(VI). The composition and structure of this chitosan-based hydrogel were analyzed. The performance of the fluorescent chitosan-based hydrogel in Cr(VI) adsorption was evaluated through a contrast experiment with the normal chitosan hydrogel without carbon dots. The results showed that the fluorescent chitosan-based hydrogel had a higher adsorption ability of Cr(VI) (maximum adsorption capacity, 228.2 mg g−1). The effect of the initial concentration of Cr(VI) and the contact time were also evaluated. The results confirmed that the adsorption isotherm was according to the Langmuir model, and the adsorption kinetics followed the pseudo-second-order model. Furthermore, as a fluorescent sensor for Cr(VI), the detection sensitivity and selectivity were examined. The quantitative detection of Cr(VI) was achieved in the linear range of 10–80 mg L−1. Furthermore, for this fluorescent chitosan-based hydrogel, the mechanism for highly efficient adsorption and detection of Cr(VI) was analyzed via FTIR and XPS. These results showed that the excellent sorption and sensing abilities of Cr(VI) may be mainly attributed to the porous structures and the additional titanate and cellulose nanofibers modified with carbon dots improving sorption ability of Cr(VI) and providing a rapid visual response to Cr(VI).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Heavy metal removal from water by magnetite nanorods
Karami, H. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.01.022 · Cited by 236
Cited by
Elgarahy, A. M., Elwakeel, K. Z., Mohammad, S. H., & Elshoubaky, G. A. (2021) · Cleaner Engineering and Technology · doi:10.1016/j.clet.2021.100209 · Cited by 686
Methods to prepare biosorbents and magnetic sorbents for water treatment: a review
Osman, A. I., El-Monaem, E. M. A., Elgarahy, A. M., Aniagor, C. O., Hosny, M., Farghali, M., Rashad, E., Ejimofor, M. I., López-Maldonado, E. A., Ihara, I., et al. (2023) · Environmental Chemistry Letters · doi:10.1007/s10311-023-01603-4 · Cited by 329
Current trends in the detection and removal of heavy metal ions using functional materials
Li, M., Shi, Q., Song, N., Xiao, Y., Wang, L., Chen, Z., & James, T. D. (2023) · Chemical Society Reviews · doi:10.1039/d2cs00683a · Cited by 310
Cheng, S., Zeng, X., & Liu, P. (2024) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2024.105956 · Cited by 73
Metadata
- Authors
- Luo, Q., Huang, X., Luo, Y., Yuan, H., Ren, T., Li, X., Xu, D., Guo, X., & Wu, Y.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-03
- Volume
- 407
- Pages
- 127050
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3087468118
- Cited by
- 200
- References
- 1
- FWCI
- 7.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Fluorescent chitosan-based hydrogel incorporating titanate and cellulose nanofibers modified with carbon dots for adsorption and detection of Cr(VI). https://app.cochat.ai/papers/10.1016/j.cej.2020.127050
- The paper
- Luo, Q., Huang, X., Luo, Y., Yuan, H., Ren, T., Li, X., Xu, D., Guo, X., & Wu, Y. (2021). Fluorescent chitosan-based hydrogel incorporating titanate and cellulose nanofibers modified with carbon dots for adsorption and detection of Cr(VI). Chemical Engineering Journal. https://doi.org/10.1016/j.cej.2020.127050
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.