The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Enhanced removal of methylparaben mediated by cobalt/carbon nanotubes (Co/CNTs) activated peroxymonosulfate in chloride-containing water: Reaction kinetics, mechanisms and pathways
Abstract
Abstract Chloride ion (Cl−) widely presents in natural water and wastewater, which can significantly affect the performance of sulfate radical-based advanced oxidation processes (SR-AOPs). However, few studies are available now on the generation of chlorinated by-products in the peroxymonosulfate (PMS) based systems. Here a novel catalyst (cobalt/carbon nanotubes, Co/CNTs) was synthesized and used as a PMS activator to remove methylparaben (MeP) with and without Cl−. The morphology and chemical composition of the fresh and used Co/CNTs were characterized by TEM, SEM, XRD, BET, and XPS. Results revealed that Co/CNTs exhibited significant catalytic activity toward MeP removal, and the removal efficiency increased with the augment of reaction temperature and concentrations of Co/CNTs and PMS. In the absence of Cl−, 83.2% of 10 μM MeP was degraded within 60 min by using 2 mg/L Co/CNTs and 100 μM PMS at 25 °C with pH 7.0. However, complete removal of MeP was achieved within 20 min in the presence of 100 mM Cl−, which enhanced the apparent rate constant by a factor of 4.3. Consequently, TOC removal was enhanced from 8.1% to 19.2% within 60 min. Through the quenching experiments, both SO4 − and OH were found responsible for MeP degradation without Cl−, while Cl2− was the main reactive oxygen species (ROS) with 100 mM Cl−. Based on the intermediates identified via TOF-LC-MS, four potential reaction pathways were proposed, including hydrogen abstraction coupling reaction, hydroxylation, OH attack, and Cl2− attack. The intermediates also exhibited decreased toxicity compared to the parent compound based on the ecotoxicity evaluation. In addition, Co/CNTs + PMS system achieved over 60% MeP removal from real wastewater with elevated PMS concentration, indicating the process applicability. These findings provide valuable information of SR-AOPs to facilitate organic contaminants removal in Cl−-containing water.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, J., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.059 · Cited by 4,087
Self-citationZhou, Z., Liu, X., Sun, K., Lin, C., Ma, J., He, M., & Ouyang, W. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.04.213 · Cited by 677
Cited by
Hassani, A., Scaria, J., Ghanbari, F., & Nidheesh, P. V. (2023) · Environmental Research · doi:10.1016/j.envres.2022.114789 · Cited by 293
Metadata
- Authors
- Peng, J., Wang, Z., Wang, S., Liu, J., Zhang, Y., Wang, B., Gong, Z., Wang, M., Dong, H., Shi, J., Liu, H., Yan, G., Liu, G., Gao, S., & Cao, Z.
- Venue
- Chemical Engineering Journal
- Publisher
- Elsevier BV
- Published
- 2021-04
- Volume
- 409
- Pages
- 128176
- ISSN
- 1385-8947 (ISSN-L)
- OpenAlex
- W3117969855
- Cited by
- 163
- References
- 2
- FWCI
- 7.69
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.