Production of granular activated carbon by thermal air oxidation of biomass charcoal/biochar for water treatment in rural communities: A mechanistic investigation
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Small communities in remote areas of the United States often lack adequate water treatment services. Adsorption by granular activated carbon (GAC) is a vital drinking-water purification approach in small water treatment plants and point-of-entry and point-of-use systems. This study shows that rural communities can utilize a simple approach, thermal air oxidation (TAO), to produce their own GAC from locally available biomass materials. Unlike commercial GAC production processes that require high temperatures and activating gasses, activation of charcoals (biochars) by TAO can be achieved at moderate temperatures of 400‒500 °C without a regulated supply of activating gasses. After a brief TAO for 30‒40 min, charcoals/biochars showed significant increases in the surface area by up to 80-fold, oxygen-containing functional groups, porosity, and adsorption of test organic contaminants, including one anionic herbicide, two neutral triazine herbicides, and one natural estrogen. The GAC produced by the TAO process had a N2 B.E.T. surface area of up to approximately 850 m2/g, which is comparable to that of commercial GAC. The pore size distribution (PSD) of TAO-generated GAC was narrow and peaked at an approximate pore width of 0.8‒0.9 nm. Both the surface area and PSD were significantly affected by the conditions of TAO. GAC made from walnut/almond charcoals exhibited the highest adsorptivity, despite a relatively low surface area. This simple, innovative GAC production approach is suitable for use in small community- and household-scale applications, and therefore may benefit rural communities, water treatment professionals, farmers, and the GAC industry as a whole.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Xiao, F., Jin, B., Golovko, S. A., Golovko, M. Y., & Xing, B. (2019) · Environmental Science & Technology · doi:10.1021/acs.est.9b05379 · Cited by 197
Self-citation
Cited by
Biochar as a low-cost adsorbent for aqueous heavy metal removal: A review
Qiu, B., Tao, X., Wang, H., Li, W., Ding, X., & Chu, H. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105081 · Cited by 687
Biomass-based carbon materials for CO2 capture: A review
Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102373 · Cited by 200
Air oxidation in surface engineering of biochar-based materials: a critical review
Sun, Z., Dai, L., Lai, P., Shen, F., Shen, F., & Zhu, W. (2022) · Carbon Research · doi:10.1007/s44246-022-00031-3 · Cited by 56
Metadata
- Authors
- Xiao, F., Bedane, A. H., Mallula, S., Sasi, P. C., Alinezhad, A., Soli, D., Hagen, Z. M., & Mann, M. D.
- Venue
- Chemical Engineering Journal Advances
- Publisher
- Elsevier BV
- Published
- 2020-12
- Volume
- 4
- Pages
- 100035
- ISSN
- 2666-8211 (ISSN-L)
- OpenAlex
- W3093630505
- Cited by
- 66
- References
- 1
- FWCI
- 1.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Production of granular activated carbon by thermal air oxidation of biomass charcoal/biochar for water treatment in rural communities: A mechanistic investigation. https://app.cochat.ai/papers/10.1016/j.ceja.2020.100035
- The paper
- Xiao, F., Bedane, A. H., Mallula, S., Sasi, P. C., Alinezhad, A., Soli, D., Hagen, Z. M., & Mann, M. D. (2020). Production of granular activated carbon by thermal air oxidation of biomass charcoal/biochar for water treatment in rural communities: A mechanistic investigation. Chemical Engineering Journal Advances. https://doi.org/10.1016/j.ceja.2020.100035
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.