The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Efflorescence and subflorescence induced microstructural and mechanical evolution in fly ash-based geopolymers
Open accessAbstract
This paper reports the effects of efflorescence on the microstructural and mechanical properties of fly ash-based geopolymers. Geopolymer pastes manufactured by sodium hydroxide and sodium silicate activation of three Class F fly ashes exhibit varying efflorescence behaviour. The geopolymer derived from sodium silicate activation of fine fly ash, which has a compact microstructure, shows a relatively slow efflorescence rate and low efflorescence potential. The efflorescence occurring on the surface of the geopolymer specimens does not change their mineralogical characteristics. However, the compressive strength development and compressive modulus of geopolymers can be affected through processes related to the loss of alkalis, and also to subflorescence. The phenomenon of subflorescence can be regarded as an extended efflorescence taking place under the surface of the material, leading to crystallisation pressure, which may exceed the tensile strength of hardened binders and generate structural damage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bernal, S. A., Provis, J. L., Walkley, B., San Nicolas, R., Gehman, J. D., Brice, D. G., Kilcullen, A. R., Duxson, P., & van Deventer, J. S. J. (2013) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.06.007 · Cited by 1,019
Self-citationThe mechanical properties of fly ash-based geopolymer concrete with alkaline activators
Ryu, G. S., Lee, Y. B., Koh, K. T., & Chung, Y. S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.05.069 · Cited by 927
Effect of Curing Temperature and Silicate Concentration on Fly-Ash-Based Geopolymerization
Sindhunata, van Deventer, J. S. J., Lukey, G. C., & Xu, H. (2006) · Industrial & Engineering Chemistry Research · doi:10.1021/ie051251p · Cited by 390
Bernal, S. A., Provis, J. L., Brice, D. G., Kilcullen, A., Duxson, P., & van Deventer, J. S. J. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2012.07.002 · Cited by 385
Self-citation
Cited by
Recent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationEffects of Si/Al ratio on the efflorescence and properties of fly ash based geopolymer
Wang, Y., Liu, X., Zhang, W., Li, Z., Zhang, Y., Li, Y., & Ren, Y. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118852 · Cited by 395
Wang, A., Zheng, Y., Zhang, Z., Liu, K., Li, Y., Shi, L., & Sun, D. (2020) · Engineering · doi:10.1016/j.eng.2019.08.019 · Cited by 389
Self-citationA review on mixture design methods for geopolymer concrete
Li, N., Shi, C., Zhang, Z., Wang, H., & Liu, Y. (2019) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2019.107490 · Cited by 351
Self-citationGeopolymer foams: An overview of recent advancements
Novais, R. M., Pullar, R. C., & Labrincha, J. A. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2019.100621 · Cited by 303
Metadata
- Authors
- Zhang, Z., Provis, J. L., Ma, X., Reid, A., & Wang, H.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 92
- Pages
- 165-177
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W2807834286
- Cited by
- 242
- References
- 4
- FWCI
- 16.39
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.