The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Mechanical and fracture properties of ultra-high performance geopolymer concrete: Effects of steel fiber and silica fume
Abstract
Abstract This study investigates the effects of steel fiber and silica fume on the mechanical and fracture properties of ultra-high performance geopolymer concrete (UHPGC). Four volume fractions of steel fiber (0%, 1%, 2% and 3%) and four contents of silica fume by the mass of total binders (5%, 10%, 20% and 30%) were used. The mechanical and fracture properties evaluated include the compressive, splitting tensile and ultimate flexural strengths, modulus of elasticity, flexural behavior, fracture energy and stress intensity factor. In addition, the correlations among the compressive and splitting tensile strengths, and compressive strength and elastic modulus were studied. The results indicated the increase of steel fiber dosage resulted in the decrease of the workability, but the continuous improvement of mechanical and fracture performance of UHPGC. The empirical equations for predicting elastic modulus of conventional ultra-high performance concrete overestimated the elastic modulus of UHPGC, however some prediction formulas for the splitting tensile strength of PC-based concretes could be applied for UHPGC. Silica fume had a complicated influence on workability and hardened properties of UHPGC, which is strongly dependent on its amount. The inclusion of 10% silica fume induced the increase of the flowability, but the sharp degradation of the mechanical performance, while the specimens with 20% and 30% silica fume possessed the superior mechanical characteristic to that with 5% silica fume. The steel fiber dosage could be decreased without sacrificing the mechanical and fracture performance of UHPGC, via the increase of silica fume content.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Self-citationGarcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Alkali-Activated Cements and Concretes
Shi, C., Krivenko, P. V., & Roy, D. (2006) · Taylor & Francis eBooks · doi:10.4324/9780203390672 · Cited by 1,164
Self-citationMechanical properties of ultra-high-performance fiber-reinforced concrete: A review
Yoo, D.-Y., & Banthia, N. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.08.001 · Cited by 1,008
A review on ultra high performance concrete: Part II. Hydration, microstructure and properties
Wang, D., Shi, C., Wu, Z., Xiao, J., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.095 · Cited by 924
Self-citationAlkali-activated fly ash/slag cements
Puertas, F., Martı́nez-Ramı́rez, S., Alonso, S., & Vázquez, T. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00298-2 · Cited by 921
Effects of steel fiber content and shape on mechanical properties of ultra high performance concrete
Wu, Z., Shi, C., He, W., & Wu, L. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.028 · Cited by 865
Self-citationRecent progress in low-carbon binders
Shi, C., Qu, B., & Provis, J. L. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.05.009 · Cited by 714
Self-citationYu, R., Spiesz, P., & Brouwers, H. J. H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.024 · Cited by 704
Fly ash-based geopolymers: The relationship between composition, pore structure and efflorescence
Zhang, Z., Provis, J. L., Reid, A., & Wang, H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.06.004 · Cited by 527
Self-citation
Cited by
Shehata, N., Mohamed, O. A., Sayed, E. T., Abdelkareem, M. A., & Olabi, A. G. (2022) · Science of The Total Environment · doi:10.1016/j.scitotenv.2022.155577 · Cited by 371
Rheology of alkali-activated materials: A review
Lu, C., Zhang, Z., Shi, C., Li, N., Jiao, D., & Yuan, Q. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104061 · Cited by 283
Self-citationLao, J.-C., Huang, B.-T., Fang, Y., Xu, L.-Y., Dai, J.-G., & Shah, S. P. (2023) · Cement and Concrete Research · doi:10.1016/j.cemconres.2022.107075 · Cited by 281
A review on fracture properties of steel fiber reinforced concrete
Zhang, P., Wang, C., Gao, Z., & Wang, F. (2023) · Journal of Building Engineering · doi:10.1016/j.jobe.2023.105975 · Cited by 264
Recent progress in understanding setting and hardening of alkali-activated slag (AAS) materials
Jiang, D., Shi, C., & Zhang, Z. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104795 · Cited by 165
Self-citation
Metadata
- Authors
- Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 112
- Pages
- 103665
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3024659633
- Cited by
- 351
- References
- 46
- FWCI
- 24.32
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical and fracture properties of ultra-high performance geopolymer concrete: Effects of steel fiber and silica fume. https://app.cochat.ai/papers/10.1016/j.cemconcomp.2020.103665
- The paper
- Liu, Y., Shi, C., Zhang, Z., Li, N., & Shi, D. (2020). Mechanical and fracture properties of ultra-high performance geopolymer concrete: Effects of steel fiber and silica fume. Cement and Concrete Composites. https://doi.org/10.1016/j.cemconcomp.2020.103665
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.