The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Influence of supplementary cementitious materials on rheological properties of 3D printed fly ash based geopolymer
Abstract
Abstract 3D printed fly ash based geopolymer was prepared with fly ash and quartz sand as main raw materials while slag powder and silica fume as supplementary cementitious materials. In this paper, anhydrous sodium silicate powder was used as activator and ATTAGEL-50 thixotropic thickener was used as 3D printing additive. The effect of slag powder and silica fume on the rheological properties of 3D printed fly ash based geopolymer was studied. The results show that the apparent viscosity, thixotropic property, plastic viscosity and yield stress of geopolymer first increased and then decreased with the increase of slag powder and silica fume respectively. Compared with the Bingham (BH) model, the Herschel- Bulkley (H–B) model is more accurate and more suitable for characterizing the rheological model of fly ash based 3D printed geopolymer. The suitable content for slag powder is 10%. On the basis of adding slag powder, silica fume was also used to replace the fly ash, the suitable content for silica fume is 10% in this fly ash-slag powder based 3D printing geopolymer. According to the SEM observations, it is found that the interior of the printing layer of the 3D printing block is more conducive to the production of the geopolymer gel than the interlaminar surface of the printing layers. It is found that the printing layers are connected with each other through bridges.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recent update on the environmental impact of geopolymers
Habert, G., & Ouellet-Plamondon, C. (2016) · RILEM Technical Letters · doi:10.21809/rilemtechlett.2016.6 · Cited by 330
Cited by
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Liu, C., Wang, X., Chen, Y., Zhang, C., Ma, L., Deng, Z., Chen, C., Zhang, Y., Pan, J., & Banthia, N. (2021) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2021.104158 · Cited by 266
Metadata
- Authors
- Guo, X., Yang, J., & Xiong, G.
- Venue
- Cement and Concrete Composites
- Publisher
- Elsevier BV
- Published
- 2020-11
- Volume
- 114
- Pages
- 103820
- ISSN
- 0958-9465 (ISSN-L)
- OpenAlex
- W3087800900
- Cited by
- 179
- References
- 1
- FWCI
- 9.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.