The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Incorporation of titanium dioxide nanoparticles in mortars — Influence of microstructure in the hardened state properties and photocatalytic activity
Open accessAbstract
The environmental pollution in urban areas is one of the causes for poor indoor air quality in buildings, particularly in suburban areas. The development of photocatalytic construction materials can contribute to clean the air and improve sustainability levels. Previous studies have focused mainly in cement and concrete materials, disregarding the potential application in historic buildings. In this work, a photocatalytic additive (titanium dioxide) was added to mortars prepared with aerial lime, cement and gypsum binders. The main goal was to study the way that microstructural changes affect the photocatalytic efficiency. The photocatalytic activity was determined using a reactor developed to assess the degradation rate with a common urban pollutant, NOx. The laboratory results show that all the compositions tested exhibited high photocatalytic efficiency. It was demonstrated that photocatalytic mortars can be applied in new and old buildings, because the nanoadditives do not compromise the mortar hardened state properties.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photocatalysis on TiO2 Surfaces: Principles, Mechanisms, and Selected Results
Linsebigler, A. L., Lu, G., & Yates, J. T. (1995) · Chemical Reviews · doi:10.1021/cr00035a013 · Cited by 11,575
TiO2 photocatalysis and related surface phenomena
FUJISHIMA, A., ZHANG, X., & TRYK, D. (2008) · Surface Science Reports · doi:10.1016/j.surfrep.2008.10.001 · Cited by 6,737
Photoinduced reactivity of titanium dioxide
CARP, O. (2004) · Progress in Solid State Chemistry · doi:10.1016/j.progsolidstchem.2004.08.001 · Cited by 4,566
Fox, M. A., & Dulay, M. T. (1993) · Chemical Reviews · doi:10.1021/cr00017a016 · Cited by 4,163
Gaya, U. I., & Abdullah, A. H. (2008) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2007.12.003 · Cited by 2,984
Jones, A. P. (1999) · Atmospheric Environment · doi:10.1016/s1352-2310(99)00272-1 · Cited by 1,481
Photocatalyzed destruction of water contaminants
Ollis, D. F., Pelizzetti, E., & Serpone, N. (1991) · Environmental Science & Technology · doi:10.1021/es00021a001 · Cited by 1,269
Phase-pure TiO 2 nanoparticles: anatase, brookite and rutile
Reyes-Coronado, D., Rodríguez-Gattorno, G., Espinosa-Pesqueira, M. E., Cab, C., de Coss, R., & Oskam, G. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/14/145605 · Cited by 1,165
Photocatalytic oxidation for indoor air purification: a literature review
Zhao, J., & Yang, X. (2003) · Building and Environment · doi:10.1016/s0360-1323(02)00212-3 · Cited by 906
Photocatalytic purification of volatile organic compounds in indoor air: A literature review
Mo, J., Zhang, Y., Xu, Q., Lamson, J. J., & Zhao, R. (2009) · Atmospheric Environment · doi:10.1016/j.atmosenv.2009.01.034 · Cited by 804
Cited by
Reactive powder concrete reinforced with nano SiO2-coated TiO2
Han, B., Li, Z., Zhang, L., Zeng, S., Yu, X., Han, B., & Ou, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.05.065 · Cited by 237
Metadata
- Authors
- Lucas, S. S., Ferreira, V. M., & de Aguiar, J. L. B.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2013-01
- Volume
- 43
- Pages
- 112-120
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2088057447
- Cited by
- 265
- References
- 30
- FWCI
- 2.55
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Incorporation of titanium dioxide nanoparticles in mortars — Influence of microstructure in the hardened state properties and photocatalytic activity. https://app.cochat.ai/papers/10.1016/j.cemconres.2012.09.007
- The paper
- Lucas, S. S., Ferreira, V. M., & de Aguiar, J. L. B. (2013). Incorporation of titanium dioxide nanoparticles in mortars — Influence of microstructure in the hardened state properties and photocatalytic activity. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2012.09.007
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.