The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Microstructure and mechanical properties of carbon nanotube reinforced cementitious composites developed using a novel dispersion technique
Abstract
The present paper reports the first attempt of developing carbon nanotube (CNT) reinforced cement composites through a short dispersion route using Pluronic F-127 as a novel dispersing agent. Optimum concentrations of Pluronic for various types of CNT were determined, and the influences of Pluronic and CNT on the microstructure and mechanical properties of cementitious composites were thoroughly investigated. Pluronic with optimized defoamer concentration significantly improved the bulk density and mechanical properties of cement mortar. Further, dispersion of 0.1% single walled nanotube (SWNT) improved flexural modulus of mortar by 72% and flexural and compressive strengths by 7% and 19%, respectively after 28 days of hydration. Flexural and compressive strengths with functionalized SWNT increased with the hydration period up to 17% and 23% after 56 days, respectively. All CNT reinforced samples exhibited significantly higher stiffness, fracture energy and ductility as compared to plain mortar and composite samples prepared using a common surfactant.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Individually Suspended Single-Walled Carbon Nanotubes in Various Surfactants
Moore, V. C., Strano, M. S., Haroz, E. H., Hauge, R. H., Smalley, R. E., Schmidt, J., & Talmon, Y. (2003) · Nano Letters · doi:10.1021/nl034524j · Cited by 1,620
The role of surfactants in dispersion of carbon nanotubes
Vaisman, L., Wagner, H. D., & Marom, G. (2006) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2006.11.007 · Cited by 1,492
Influence of nano-SiO2 addition on properties of hardened cement paste as compared with silica fume
Qing, Y., Zenan, Z., Deyu, K., & Rongshen, C. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.09.001 · Cited by 1,242
Microstructure of cement mortar with nano-particles
Li, H., Xiao, H.-G., Yuan, J., & Ou, J. (2004) · Composites Part B: Engineering · doi:10.1016/s1359-8368(03)00052-0 · Cited by 1,226
Highly dispersed carbon nanotube reinforced cement based materials
Konsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.015 · Cited by 1,002
Li, G. Y., Wang, P. M., & Zhao, X. (2005) · Carbon · doi:10.1016/j.carbon.2004.12.017 · Cited by 954
Production of aqueous colloidal dispersions of carbon nanotubes
Jiang, L., Gao, L., & Sun, J. (2003) · Journal of Colloid and Interface Science · doi:10.1016/s0021-9797(02)00176-5 · Cited by 875
Early hydration and setting of Portland cement monitored by IR, SEM and Vicat techniques
Ylmén, R., Jäglid, U., Steenari, B.-M., & Panas, I. (2009) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.01.017 · Cited by 780
Comparative study of carbon nanotube dispersion using surfactants
Rastogi, R., Kaushal, R., Tripathi, S. K., Sharma, A. L., Kaur, I., & Bharadwaj, L. M. (2008) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2008.09.015 · Cited by 739
Konsta-Gdoutos, M. S., Metaxa, Z. S., & Shah, S. P. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2009.10.007 · Cited by 683
Cited by
Jung, M., Lee, Y.-S., Hong, S.-G., & Moon, J. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106017 · Cited by 348
Ding, S., Xiang, Y., Ni, Y.-Q., Thakur, V. K., Wang, X., Han, B., & Ou, J. (2022) · Nano Today · doi:10.1016/j.nantod.2022.101438 · Cited by 321
Chen, L., & Tang, Y. (2026) · Structural Concrete · doi:10.1002/suco.70305 · Cited by 2
Metadata
- Authors
- Parveen, S., Rana, S., Fangueiro, R., & Paiva, M. C.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2015-07
- Volume
- 73
- Pages
- 215-227
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2045234015
- Cited by
- 331
- References
- 33
- FWCI
- 31.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.