The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Optimized design of ultra-high performance concrete (UHPC) with a high wet packing density
Abstract
This study presents an optimized design method in developing ultra-high performance concrete (UHPC) with high wet packing density, in which the multiply effects of solid and liquid phases on UHPC packing mode are considered. Specifically, a model based on D-optimal method is firstly established to assess the influence of solid granular particles and superplasticizer (SP) on the UHPC packing density. Based on the theoretical analysis, the mixture proportions can be optimized, and UHPC with high wet packing density could be produced. Then, to evaluate the reliability of the math-physical method in developing UHPC, its compressive strength and pore structure are tested. The obtained experimental results show that the designed UHPC contributes high packing density, leading to optimized pore structure and extraordinary compressive strength. The experimental verification further highlights that D-optimal method is a promising and effective approach to design UHPC, and eventually for the development of sustainable UHPC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Concrete: Microstructure, Properties, and Materials
Mehta, P. K., & Monteiro, P. J. M. (2005) · Cited by 5,607
Composition of reactive powder concretes
Richard, P., & Cheyrezy, M. (1995) · Cement and Concrete Research · doi:10.1016/0008-8846(95)00144-2 · Cited by 2,358
A Practical Guide to Microstructural Analysis of Cementitious Materials
(2018) · CRC Press eBooks · doi:10.1201/b19074 · Cited by 2,110
Environmental management. Life cycle assessment. Requirements and guidelines
(2015) · doi:10.3403/30152732u · Cited by 1,730
Environmental management. Life cycle assessment. Principles and framework
(2013) · doi:10.3403/30151316 · Cited by 1,401
A review on ultra high performance concrete: Part I. Raw materials and mixture design
Shi, C., Wu, Z., Xiao, J., Wang, D., Huang, Z., & Fang, Z. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.10.088 · Cited by 1,392
Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2014) · Cement and Concrete Research · doi:10.1016/j.cemconres.2013.11.002 · Cited by 1,149
Self-citationOptimization of ultra-high-performance concrete by the use of a packing model
de Larrard, F., & Sedran, T. (1994) · Cement and Concrete Research · doi:10.1016/0008-8846(94)90022-1 · Cited by 993
Porosity, pore size distribution and in situ strength of concrete
Kumar, R., & Bhattacharjee, B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00942-0 · Cited by 966
The Laws of Proportioning Concrete
Fuller, W. B., & Thompson, S. E. (1907) · Transactions of the American Society of Civil Engineers · doi:10.1061/taceat.0001979 · Cited by 902
Tensile behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete
Park, S. H., Kim, D. J., Ryu, G. S., & Koh, K. T. (2012) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.09.009 · Cited by 751
Yu, R., Spiesz, P., & Brouwers, H. J. H. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.09.024 · Cited by 704
Self-citationPacking density of cementitious materials: part 1—measurement using a wet packing method
Wong, H. H. C., & Kwan, A. K. H. (2008) · Materials and Structures · doi:10.1617/s11527-007-9274-5 · Cited by 556
Uchikawa, H., Hanehara, S., & Sawaki, D. (1997) · Cement and Concrete Research · doi:10.1016/s0008-8846(96)00207-4 · Cited by 503
Pore Structure of Cement-Based Materials: Testing, Interpretation and Requirements
Aligizaki, K. K. (2005) · Cited by 495
Hassan, A. M. T., Jones, S. W., & Mahmud, G. H. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.04.030 · Cited by 478
Tayeh, B. A., Abu Bakar, B. H., Megat Johari, M. A., & Voo, Y. L. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.06.013 · Cited by 435
Andreasen, A. H. M. (1930) · Kolloid-Zeitschrift · doi:10.1007/bf01422986 · Cited by 423
Linear packing density model of grain mixtures
Stovall, T., de Larrard, F., & Buil, M. (1986) · Powder Technology · doi:10.1016/0032-5910(86)80058-4 · Cited by 420
Hydration and microstructure of ultra high performance concrete incorporating rice husk ash
Van Tuan, N., Ye, G., van Breugel, K., & Copuroglu, O. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.009 · Cited by 412
Mixture-proportioning of high-performance concrete
de Larrard, F., & Sedran, T. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(02)00861-x · Cited by 401
Meng, W., & Khayat, K. H. (2016) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2016.09.069 · Cited by 397
Odler, I., & Rößler, M. (1985) · Cement and Concrete Research · doi:10.1016/0008-8846(85)90113-9 · Cited by 387
Computational design optimization of concrete mixtures: A review
DeRousseau, M. A., Kasprzyk, J. R., & Srubar, W. V. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.007 · Cited by 359
Mehdipour, I., & Khayat, K. H. (2017) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2017.01.005 · Cited by 299
Yang, S. L., Millard, S. G., Soutsos, M. N., Barnett, S. J., & Le, T. T. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.11.012 · Cited by 272
El-Dieb, A. S. (2009) · Materials & Design · doi:10.1016/j.matdes.2009.04.024 · Cited by 268
Aïtcin, P.-C. (1998) · Modern concrete technology series · doi:10.1201/9781420022636 · Cited by 225
Habert, G., Denarié, E., Šajna, A., & Rossi, P. (2013) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2012.11.008 · Cited by 219
The function of fillers in concrete
Moosberg-Bustnes, H., Lagerblad, B., & Forssberg, E. (2004) · Materials and Structures · doi:10.1007/bf02486602 · Cited by 199
Statistical mixture design approach for eco-efficient UHPC
Ghafari, E., Costa, H., & Júlio, E. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.016 · Cited by 191
The pore structure of paste in concrete
Winslow, D. N., & Liu, D. (1990) · Cement and Concrete Research · doi:10.1016/0008-8846(90)90075-9 · Cited by 174
Packing density of concrete mix under dry and wet conditions
Li, L. G., & Kwan, A. K. H. (2013) · Powder Technology · doi:10.1016/j.powtec.2013.12.020 · Cited by 146
High volume limestone alkali-activated cement developed by design of experiment
Moseson, A. J., Moseson, D. E., & Barsoum, M. W. (2011) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2011.11.004 · Cited by 117
Compaction-interaction packing model: regarding the effect of fillers in concrete mixture design
Fennis, S. A. A. M., Walraven, J., & den Uijl, J. A. (2012) · Materials and Structures · doi:10.1617/s11527-012-9910-6 · Cited by 81
Optimization of the water-based road-marking paint by experimental design, mixture method
Fatemi, S., Varkani, M. K., Ranjbar, Z., & Bastani, S. (2006) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2006.01.006 · Cited by 77
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Amran, M., Huang, S.-S., Onaizi, A. M., Makul, N., Abdelgader, H. S., & Ozbakkaloglu, T. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2022.129029 · Cited by 548
Metadata
- Authors
- Wang, X., Yu, R., Song, Q., Shui, Z., Liu, Z., Wu, S., & Hou, D.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 126
- Pages
- 105921
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W2981852273
- Cited by
- 332
- References
- 36
- FWCI
- 17.38
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.