The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Effect of NaOH content on hydration, mineralogy, porosity and strength in alkali/sulfate-activated binders from ground granulated blast furnace slag and phosphogypsum
Abstract
This study investigates the effect of NaOH content on alkali/sulfate-activated binders from 90 wt% ground granulated blast furnace slag (GGBFS) and 10 wt% phosphogypsum (PG). Alkali activators were prepared with a NaOH molarity ranging from 0 M to 4 M. The hydration was monitored using in-situ X-ray diffraction (XRD) and isothermal calorimetry. The hydration product assemblage was investigated using XRD, thermogravimetric analysis (TGA), Fourier-transformed infrared (FTIR) spectroscopy, nitrogen adsorption/desorption and compressive strength tests. A molarity of 0 M NaOH gave rise to the highest porosity and highest strength, although setting occurred only after 7 days. From a molarity of 2 M NaOH and higher, ettringite disappeared and got replaced by a monosulfate phase (i.e., NaCa4Al2O6(SO4)1.5.15H2O) and amorphous aluminum-hydroxide. This study shows the potential of using GGBFS and PG for the development of novel by-product based cementitious binders.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Green house gas emissions due to concrete manufacture
Flower, D. J. M., & Sanjayan, J. G. (2007) · The International Journal of Life Cycle Assessment · doi:10.1065/lca2007.05.327 · Cited by 912
Yousuf, M., Mollah, A., Hess, T. R., Tsai, Y.-N., & Cocke, D. L. (1993) · Cement and Concrete Research · doi:10.1016/0008-8846(93)90031-4 · Cited by 250
Cited by
Hydration Characteristics and Microstructure of Alkali-Activated Slag Concrete: A Review
Fu, Q., Bu, M., Zhang, Z., Xu, W., Yuan, Q., & Niu, D. (2023) · Engineering · doi:10.1016/j.eng.2021.07.026 · Cited by 272
Metadata
- Authors
- Gijbels, K., Pontikes, Y., Samyn, P., Schreurs, S., & Schroeyers, W.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 132
- Pages
- 106054
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3015042222
- Cited by
- 230
- References
- 4
- FWCI
- 10.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of NaOH content on hydration, mineralogy, porosity and strength in alkali/sulfate-activated binders from ground granulated blast furnace slag and phosphogypsum. https://app.cochat.ai/papers/10.1016/j.cemconres.2020.106054
- The paper
- Gijbels, K., Pontikes, Y., Samyn, P., Schreurs, S., & Schroeyers, W. (2020). Effect of NaOH content on hydration, mineralogy, porosity and strength in alkali/sulfate-activated binders from ground granulated blast furnace slag and phosphogypsum. Cement and Concrete Research. https://doi.org/10.1016/j.cemconres.2020.106054
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.