CoChat

Strength, shrinkage and creep and durability aspects of concrete including CO2 treated recycled fine aggregate

Open access
Chinzorigt, Gombosuren, Lim, Myung Kwan, Yu, Myoungyoul, Lee, Hyuk, Enkbold, Odontuya, Choi, Donguk · 2020 · Cement and Concrete Research
Cited by 178

The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.

Abstract

Strength development and shrinkage and creep behavior of recycled aggregate concrete as well as durability aspects such as carbonation and chloride ion penetration were investigated. Except for Control concrete, natural fine aggregate was replaced by recycled fine aggregate at a rate of 0%, 15%, 30%, or 50% while natural coarse aggregate was completely replaced by recycled coarse aggregate (RCA). Two different recycled fine aggregates were used: Recycled fine aggregate (RFA) and CO2 treated recycled fine aggregate (CRFA). Compressive strength of recycled aggregate concrete at all ages tested was reduced from that of the Control concrete. CO2 treatment of recycled fine aggregate improved not only the aggregate physical properties but also the strength of recycled aggregate concrete. The compressive strength reduction was 19% or less at 100% RCA + 15%–50% RFA replacement level while it was 11% or less at 100% RCA + 15%–50% CRFA replacement level after 28 days. Shrinkage and creep strains were measured for up to 300 days. Shrinkage of concrete with 100% RCA was 12% larger than that of Control concrete, while shrinkage of concretes with 100% RCA + 30% RFA or 30% CRFA replacement increased by about 25%–30%. In the creep test, creep coefficient and specific creep of all recycled aggregate concretes increased by about 20–35% over that of the Control. CO2 treatment of recycled fine aggregate resulted in up to 15% improved strength of recycled aggregate concrete, but showed little improvement on shrinkage and creep. Durability of recycled aggregate concrete evaluated in terms of carbonation and chloride ion penetration was reduced from that of the Control concrete.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cemconres.2020.106062

Cites

7 of 7 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 178

Metadata

Authors
Chinzorigt, G., Lim, M. K., Yu, M., Lee, H., Enkbold, O., & Choi, D.
Venue
Cement and Concrete Research
Publisher
Elsevier BV
Published
2020-10
Volume
136
Pages
106062
ISSN
0008-8846 (ISSN-L)
OpenAlex
W3045935315
Cited by
178
References
7
FWCI
11.32
Type
journal article
Language
en
Open access
hybrid

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.