The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes
Open accessAbstract
This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the fine pore structure of AAMs pastes, drastic drop of internal relative humidity is observed and large pore pressure is generated. The pore pressure induces not only elastic deformation but also a large creep of the paste. Besides the pore pressure, other driving forces, like the reduction of steric-hydration force due to the consumption of ions, also cause a certain amount of shrinkage, especially in the acceleration period. Based on the mechanisms revealed, a computational model is proposed to estimate the autogenous shrinkage of AAMs. The calculated autogenous shrinkage matches well with the measured results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Intermolecular and Surface Forces
(2011) · Intermolecular and Surface Forces · doi:10.1016/b978-0-12-391927-4.10024-6 · Cited by 16,923
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Provis, J. L. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.02.009 · Cited by 2,272
The role of inorganic polymer technology in the development of ‘green concrete’
Duxson, P., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2007.08.018 · Cited by 1,998
Advances in alternative cementitious binders
Juenger, M. C. G., Winnefeld, F., Provis, J. L., & Ideker, J. H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.012 · Cited by 1,851
New cements for the 21st century: The pursuit of an alternative to Portland cement
Shi, C., Jiménez, A. F., & Palomo, A. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.016 · Cited by 1,691
Garcia-Lodeiro, I., Palomo, A., Fernández-Jiménez, A., & Macphee, D. E. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.006 · Cited by 1,366
Ismail, I., Bernal, S. A., Provis, J. L., San Nicolas, R., Hamdan, S., & van Deventer, J. S. J. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2013.09.006 · Cited by 1,317
Theory of the stability of lyophobic colloids
Verwey, E. J. W., & Overbeek, J. T. G. (1955) · Journal of Colloid Science · doi:10.1016/0095-8522(55)90030-1 · Cited by 1,110
Ben Haha, M., Le Saout, G., Winnefeld, F., & Lothenbach, B. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.11.016 · Cited by 1,059
Mechanism of the Initial Events in the Sorption of Marine Bacteria to Surfaces
MARSHALL, K. C., STOUT, R., & MITCHELL, R. (1971) · Journal of General Microbiology · doi:10.1099/00221287-68-3-337 · Cited by 1,016
The DLVO theory in microbial adhesion
Hermansson, M. (1999) · Colloids and Surfaces B: Biointerfaces · doi:10.1016/s0927-7765(99)00029-6 · Cited by 1,004
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.05.002 · Cited by 914
A model for the C-A-S-H gel formed in alkali-activated slag cements
Puertas, F., Palacios, M., Manzano, H., Dolado, J. S., Rico, A., & Rodríguez, J. (2011) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2011.04.036 · Cited by 898
Intermolecular and Surface Forces
(2011) · doi:10.1016/c2009-0-21560-1 · Cited by 871
Effect of pore size distribution on drying shrinking of alkali-activated slag concrete
Collins, F., & Sanjayan, J. G. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00327-6 · Cited by 720
Geopolymers : structure, processing, properties and industrial applications
Provis, J. L., & van Deventer, J. S. J. (2009) · Cited by 674
Haha, M. B., Lothenbach, B., Le Saout, G., & Winnefeld, F. (2012) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.08.005 · Cited by 580
Use of Infrared Spectroscopy to Study Geopolymerization of Heterogeneous Amorphous Aluminosilicates
Lee, W. K. W., & van Deventer, J. S. J. (2003) · Langmuir · doi:10.1021/la026127e · Cited by 538
Entropic forces between amphiphilic surfaces in liquids
Israelachvili, J. N., & Wennerstroem, H. (1992) · The Journal of Physical Chemistry · doi:10.1021/j100181a007 · Cited by 482
Shrinkage mechanisms of alkali-activated slag
Ye, H., & Radlińska, A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.07.001 · Cited by 469
Shrinkage characteristics of alkali-activated fly ash/slag paste and mortar at early ages
Lee, N. K., Jang, J. G., & Lee, H. K. (2014) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.07.007 · Cited by 462
Gao, X., Yu, Q., & Brouwers, H. J. H. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.01.065 · Cited by 458
Modeling the linear elastic properties of Portland cement paste
Haecker, C., Garboczi, E. J., Bullard, J. W., Bohn, R. B., Sun, Z., Shah, S. P., & Voigt, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.05.001 · Cited by 446
Effects of dosage and modulus of water glass on early hydration of alkali–slag cements
Krizan, D., & Zivanovic, B. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00717-7 · Cited by 444
Binding mechanism and properties of alkali-activated fly ash/slag mortars
Chi, M., & Huang, R. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.11.003 · Cited by 428
Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres
Puertas, F., Amat, T., Fernández‐Jiménez, A., & Vázquez, T. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00222-9 · Cited by 406
Palacios, M., & Puertas, F. (2007) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.11.021 · Cited by 362
Effect on fresh C-S-H gels of the simultaneous addition of alkali and aluminium
García Lodeiro, I., Fernández-Jimenez, A., Palomo, A., & Macphee, D. E. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.08.004 · Cited by 321
Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers
Jang, J. G., Lee, N. K., & Lee, H. K. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.048 · Cited by 318
Expansive admixtures (mainly ettringite)
Nagataki, S., & Gomi, H. (1998) · Cement and Concrete Composites · doi:10.1016/s0958-9465(97)00064-4 · Cited by 288
Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements
Fernandez-Jimenez, A., & Puertas, F. (2003) · Advances in Cement Research · doi:10.1680/adcr.15.3.129.36623 · Cited by 285
Reactivity and reaction products of alkali-activated, fly ash/slag paste
Lee, N. K., & Lee, H. K. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.02.022 · Cited by 284
Waste glass as partial mineral precursor in alkali-activated slag/fly ash system
Zhang, S., Keulen, A., Arbi, K., & Ye, G. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.08.012 · Cited by 283
Self-citationThe shrinkage of alkali activated fly ash
Ma, Y., & Ye, G. (2015) · Cement and Concrete Research · doi:10.1016/j.cemconres.2014.10.024 · Cited by 275
Self-citationPore solution composition of alkali-activated slag/fly ash pastes
Zuo, Y., Nedeljković, M., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.10.010 · Cited by 274
Self-citationEffects of nano-TiO2 on strength, shrinkage and microstructure of alkali activated slag pastes
Yang, L. Y., Jia, Z. J., Zhang, Y. M., & Dai, J. G. (2015) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2014.11.009 · Cited by 267
Marjanović, N., Komljenović, M., Baščarević, Z., Nikolić, V., & Petrović, R. (2015) · Ceramics International · doi:10.1016/j.ceramint.2014.09.075 · Cited by 266
Chemical deformation of metakaolin based geopolymer
Li, Z., Zhang, S., Zuo, Y., Chen, W., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.03.017 · Cited by 262
Self-citationGao, X., Yu, Q. L., & Brouwers, H. J. H. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.06.108 · Cited by 261
Autogenous shrinkage of alkali activated slag mortars: Basic mechanisms and mitigation methods
Kumarappa, D. B., Peethamparan, S., & Ngami, M. (2018) · Cement and Concrete Research · doi:10.1016/j.cemconres.2018.04.004 · Cited by 257
Arbi, K., Nedeljković, M., Zuo, Y., & Ye, G. (2016) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.6b00559 · Cited by 244
Self-citationShrinkage Characteristics of Alkali-Activated Slag Cements
Cartwright, C., Rajabipour, F., & Radlińska, A. (2015) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0001058 · Cited by 243
The mechanism of geopolymer gel formation investigated through seeded nucleation
Rees, C. A., Provis, J. L., Lukey, G. C., & van Deventer, J. S. J. (2008) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2007.12.019 · Cited by 242
Ravikumar, D., & Neithalath, N. (2012) · Thermochimica Acta · doi:10.1016/j.tca.2012.07.010 · Cited by 191
Mitigating the autogenous shrinkage of alkali-activated slag by metakaolin
Li, Z., Nedeljković, M., Chen, B., & Ye, G. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.04.016 · Cited by 189
Self-citationThe interaction of solid surfaces in aqueous systems
Peschel, G., Belouschek, P., Müller, M. M., Müller, M. R., & König, R. (1982) · Colloid and Polymer Science · doi:10.1007/bf01448150 · Cited by 173
Nedeljković, M., Li, Z., & Ye, G. (2018) · Materials · doi:10.3390/ma11112121 · Cited by 167
Self-citationThe chemistry of the pore fluid of silica fume-blended cement systems
Larbi, J. A., Fraay, A. L. A., & Bijen, J. M. J. M. (1990) · Cement and Concrete Research · doi:10.1016/0008-8846(90)90095-f · Cited by 166
Zhang, Z., Li, L., Ma, X., & Wang, H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.03.043 · Cited by 164
Fang, G., Bahrami, H., & Zhang, M. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.03.155 · Cited by 161
The equivalent pore pressure and the swelling and shrinkage of cement-based materials
Coussy, O., Dangla, P., Lassabatère, T., & Baroghel-Bouny, V. (2004) · Materials and Structures · doi:10.1007/bf02481623 · Cited by 151
A ternary optimisation of mineral additives of alkali activated cement mortars
Aydın, S. (2013) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.02.005 · Cited by 149
Examining the “time-zero” of autogenous shrinkage in high/ultra-high performance cement pastes
Huang, H., & Ye, G. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.03.010 · Cited by 147
Self-citationInternal curing by superabsorbent polymers in alkali-activated slag
Li, Z., Wyrzykowski, M., Dong, H., Granja, J. L., Azenha, M., Lura, P., & Ye, G. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106123 · Cited by 123
Self-citationMagnesia modification of alkali-activated slag fly ash cement
Shen, W., Wang, Y., Zhang, T., Zhou, M., Li, J., & Cui, X. (2011) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-011-0182-8 · Cited by 112
Li, Z., Zhang, S., Liang, X., & Ye, G. (2020) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2020.103767 · Cited by 102
Self-citationMicroscopic physical basis of the poromechanical behavior of cement-based materials
Gmira, A., Zabat, M., Pellenq, R. J. ‐., & Damme, H. V. (2004) · Materials and Structures · doi:10.1007/bf02481622 · Cited by 93
Ma, Y., Yang, X., Hu, J., Zhang, Z., & Wang, H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107367 · Cited by 93
Characterization and comparison of capillary pore structures of digital cement pastes
Dong, H., Gao, P., & Ye, G. (2017) · Materials and Structures · doi:10.1617/s11527-017-1023-9 · Cited by 92
Self-citationAlkali-Activated Slag Cement Concrete
Thomas, R. J., Ye, H., Radlińska, A., et al. (2016) · ACI Concrete International · Cited by 76
Carbonation mechanism of alkali-activated fly ash and slag materials
Nedeljković, M. (2019) · Research Repository (Delft University of Technology) · doi:10.4233/uuid:97b9eabe-159e-43e1-8b35-edc61b1aa682 · Cited by 23
Valorisation of fly ashes by geopolymerisation
(2013) · Global NEST Journal · doi:10.30955/gnj.000588 · Cited by 15
Assessing the Autogenous Shrinkage of Alkali-Activated Slag/Fly Ash Mortar Blends
Uppalapati, S., & Çizer, Ö. (2017) · ACI/RILEM International Conference on Cementitious Materials and Alternative Binders for Sustainable Concrete · doi:10.14359/51701061 · Cited by 10
Autogenous Shrinkage of Alkali-activated Fly Ash-slag Pastes With and Without SAP
Fang, G., Tu, W., Zhu, Y., & Zhang, M. (2018) · UCL Discovery (University College London) · Cited by 4
Cited by
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Zhang, B., Zhu, H., Cheng, Y., Huseien, G. F., & Shah, K. W. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.125993 · Cited by 258
Metadata
- Authors
- Li, Z., Lu, T., Liang, X., Dong, H., & Ye, G.
- Venue
- Cement and Concrete Research
- Publisher
- Elsevier BV
- Published
- 2020-09
- Volume
- 135
- Pages
- 106107
- ISSN
- 0008-8846 (ISSN-L)
- OpenAlex
- W3027192735
- Cited by
- 258
- References
- 65
- FWCI
- 17.77
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.