The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
CFD–DEM simulation of the gas–solid flow in a cyclone separator
Open accessAbstract
In this work, a numerical study of the gas–solid flow in a gas cyclone is carried out by use of the combined discrete element method (DEM) and computational fluid dynamics (CFD) model where the motion of discrete particles phase is obtained by DEM which applies Newton’s equations of motion to every individual particle and the flow of continuum fluid by the traditional CFD which solves the Navier–Stokes equations at a computational cell scale. The model successfully captures the key flow features in a gas cyclone, such as the strands flow pattern of particles, and the decrease of pressure drop and tangential velocity after loading solids. The effect of solid loading ratio is studied and analysed in terms of gas and solid flow structures, and the particle–gas, particle–particle and particle–wall interaction forces. It is found that the gas pressure drop increases first and then decreases when solids are loaded. The reaction force of particles on gas flow is mainly in the tangential direction and directs mainly upward in the axial direction. The reaction force in the tangential direction will decelerate gas phase and the upward axial force will prevent gas phase from flowing downward in the near wall region. The intensive particle–wall collision regions mainly locate in the wall opposite to the cyclone inlet and the cone wall. Moreover, as the solid loading ratio increases, number of turns travelled by solids in a cyclone decreases especially in the apex region of the cyclone while the width of solid strands increases, the pressure drop and tangential velocity decrease, the high axial velocity region moves upwards, and the radial flow of gas phase is significantly dampened.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe
Tsuji, Y., Tanaka, T., & Ishida, T. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88030-l · Cited by 2,147
Fluid Mechanical Description of Fluidized Beds. Equations of Motion
Anderson, T. B., & Jackson, R. (1967) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160024a007 · Cited by 2,066
Discrete particle simulation of particulate systems: Theoretical developments
Zhu, H. P., Zhou, Z. Y., Yang, R. Y., & Yu, A. B. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.089 · Cited by 2,055
Self-citationMultiphase Flow and Fluidization
(1994) · Elsevier eBooks · doi:10.1016/c2009-0-21244-x · Cited by 1,072
Discrete numerical model for granular assemblies
(1979) · International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts · doi:10.1016/0148-9062(79)91211-7 · Cited by 994
Xu, B. H., & Yu, A. B. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00081-x · Cited by 959
Self-citationDiscrete particle simulation of particle–fluid flow: model formulations and their applicability
ZHOU, Z. Y., KUANG, S. B., CHU, K. W., & YU, A. B. (2010) · Journal of Fluid Mechanics · doi:10.1017/s002211201000306x · Cited by 921
Self-citationRolling friction in the dynamic simulation of sandpile formation
Zhou, Y. C., Wright, B. D., Yang, R. Y., Xu, B. H., & Yu, A. B. (1999) · Physica A: Statistical Mechanics and its Applications · doi:10.1016/s0378-4371(99)00183-1 · Cited by 717
Self-citationEulerian two-phase flow theory applied to fluidization
Enwald, H., Peirano, E., & Almstedt, A.-E. (1996) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(96)90004-x · Cited by 599
An experimental and numerical study of turbulent swirling flow in gas cyclones
Hoekstra, A. J., Derksen, J. J., & den Akker, H. E. A. V. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(98)00373-x · Cited by 506
Discrete particle-continuum fluid modelling of gas–solid fluidised beds
Kafui, K. D., Thornton, C., & Adams, M. J. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00140-9 · Cited by 461
Modeling The Gas and Particle Flow Inside Cyclone Separators
CORTES, C., & GIL, A. (2007) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2007.02.001 · Cited by 438
Numerical study of gas–solid flow in a cyclone separator
Wang, B., Xu, D., Chu, K., & Yu, A. (2006) · Applied Mathematical Modelling · doi:10.1016/j.apm.2006.03.011 · Cited by 403
Self-citationAdvances in Cyclone Modelling Using Unstructured Grids
Slack, M. D., Prasad, R. O., Bakker, A., & Boysan, F. (2000) · Process Safety and Environmental Protection · doi:10.1205/026387600528373 · Cited by 292
CFD-DEM modelling of multiphase flow in dense medium cyclones
Chu, K. W., Wang, B., Yu, A. B., & Vince, A. (2009) · Powder Technology · doi:10.1016/j.powtec.2009.03.015 · Cited by 275
Self-citationFan, L., & Zhu, C. (1998) · Cambridge University Press eBooks · doi:10.1017/cbo9780511530142.011 · Cited by 254
Numerical simulation of complex particle–fluid flows
Chu, K. W., & Yu, A. B. (2008) · Powder Technology · doi:10.1016/j.powtec.2007.06.017 · Cited by 238
Self-citationKawaguchi, T., Tanaka, T., & Tsuji, Y. (1998) · Powder Technology · doi:10.1016/s0032-5910(97)03366-4 · Cited by 224
A fundamental mathematical modelling approach to cyclone design
Boysan, F. (1982) · Cited by 194
Dynamics of gas–solid fluidised beds with non-spherical particle geometry
Hilton, J. E., Mason, L. R., & Cleary, P. W. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.028 · Cited by 184
Multi-scale modeling of dense phase gas–particle flow
Tsuji, Y. (2007) · Chemical Engineering Science · doi:10.1016/j.ces.2006.12.090 · Cited by 174
Li, Y., Zhang, J., & Fan, L.-S. (1999) · Chemical Engineering Science · doi:10.1016/s0009-2509(99)00263-8 · Cited by 171
Numerical simulation of the gas–solid flow in a bed with lateral gas blasting
Xu, B. H., Yu, A. B., Chew, S. J., & Zulli, P. (2000) · Powder Technology · doi:10.1016/s0032-5910(99)00223-5 · Cited by 168
Self-citationParticle‐scale modelling of gas–solid flow in fluidisation
Yu, A. B., & Xu, B. H. (2003) · Journal of Chemical Technology & Biotechnology · doi:10.1002/jctb.788 · Cited by 165
Self-citationRenzo, A. D., & Maio, F. P. D. (2006) · Chemical Engineering Science · doi:10.1016/j.ces.2006.08.009 · Cited by 148
Rhodes, M. J., Wang, X., Nguyen, M. N., et al. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00427-9 · Cited by 144
Microdynamic analysis of the particle flow in a cylindrical bladed mixer
Zhou, Y. C., Yu, A., Stewart, R. L., & Bridgwater, J. (2004) · Chemical Engineering Science · doi:10.1016/j.ces.2003.12.023 · Cited by 133
Self-citationSimulation of mass-loading effects in gas–solid cyclone separators
Derksen, J. J., Sundaresan, S., & den Akker, H. E. A. V. (2006) · Powder Technology · doi:10.1016/j.powtec.2006.01.006 · Cited by 131
Zhao, Y., Jiang, M., Liu, Y., & Zheng, J. (2009) · AIChE Journal · doi:10.1002/aic.11956 · Cited by 120
Effects of geometry and solid loading on the performance of gas cyclones
Hoffmannc, A. C., van Santen, A., Allen, R. W. K., & Clift, R. (1992) · Powder Technology · doi:10.1016/0032-5910(92)85058-4 · Cited by 110
Ibsen, C. H., Helland, E., Hjertager, B. H., Solberg, T., Tadrist, L., & Occelli, R. (2004) · Powder Technology · doi:10.1016/j.powtec.2004.09.042 · Cited by 101
The reduction of pressure drop due to dust loading in a conventional cyclone
Yuu, S., Jotaki, T., TOMITA, Y., & Yoshida, K. (1978) · Chemical Engineering Science · doi:10.1016/0009-2509(78)85132-x · Cited by 94
Extended cyclone theory for gas flows with high solids concentrations
Trefz, M., & Muschelknautz, E. (1993) · Chemical Engineering & Technology · doi:10.1002/ceat.270160303 · Cited by 78
Qian, F., Huang, Z., Chen, G., & Zhang, M. (2006) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2006.09.012 · Cited by 46
Gas-solid flow in cyclones: The Eulerian-Eulerian approach
Meier, H. F., & Mori, M. (1998) · Computers & Chemical Engineering · doi:10.1016/s0098-1354(98)00114-8 · Cited by 36
Cited by
Progress in CFD Simulations of Fluidized Beds for Chemical and Energy Process Engineering
Alobaid, F., Almohammed, N., Massoudi Farid, M., May, J., Rößger, P., Richter, A., & Epple, B. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100930 · Cited by 266
Metadata
- Authors
- Chu, K. W., Wang, B., Xu, D. L., Chen, Y. X., & Yu, A. B.
- Venue
- Chemical Engineering Science
- Publisher
- Elsevier BV
- Published
- 2011-03
- Volume
- 66
- Issue
- 5
- Pages
- 834-847
- ISSN
- 0009-2509 (ISSN-L)
- OpenAlex
- W2158425175
- Cited by
- 319
- References
- 36
- FWCI
- 6.00
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.