The DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor
Open accessAbstract
Abstract A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H 2 and CO). With the increase of steam/biomass mass ratio, H 2 and CO 2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A discrete numerical model for granular assemblies
Cundall, P. A., & Strack, O. D. L. (1979) · Géotechnique · doi:10.1680/geot.1979.29.1.47 · Cited by 17,527
Fluid Flow Through Packed Columns
Ergün, Ş. (1952) · Medical Entomology and Zoology · Cited by 6,992
Discrete particle simulation of two-dimensional fluidized bed
Tsuji, Y., Kawaguchi, T., & Tanaka, T. (1993) · Powder Technology · doi:10.1016/0032-5910(93)85010-7 · Cited by 2,462
Wen, C. Y. (1966) · Medical Entomology and Zoology · Cited by 2,381
Lagrangian numerical simulation of plug flow of cohesionless particles in a horizontal pipe
Tsuji, Y., Tanaka, T., & Ishida, T. (1992) · Powder Technology · doi:10.1016/0032-5910(92)88030-l · Cited by 2,147
Global reaction schemes for hydrocarbon combustion
Jones, W. P., & Lindstedt, R. P. (1988) · Combustion and Flame · doi:10.1016/0010-2180(88)90021-1 · Cited by 1,078
Multiphase Flow and Fluidization
(1994) · Elsevier eBooks · doi:10.1016/c2009-0-21244-x · Cited by 1,072
Hoomans, B. P. B., Kuipers, J. A. M., Briels, W. J., & van Swaaij, W. P. M. (1996) · Chemical Engineering Science · doi:10.1016/0009-2509(95)00271-5 · Cited by 1,019
Xu, B. H., & Yu, A. B. (1997) · Chemical Engineering Science · doi:10.1016/s0009-2509(97)00081-x · Cited by 959
Modeling of biomass gasification in fluidized bed
Gómez-Barea, A., & Leckner, B. (2010) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.12.002 · Cited by 905
Biomass gasification in a circulating fluidized bed
Li, X. T., Grace, J. R., Lim, C. J., Watkinson, A. P., Chen, H. P., & Kim, J. R. (2004) · Biomass and Bioenergy · doi:10.1016/s0961-9534(03)00084-9 · Cited by 779
Simulation of biomass gasification in fluidized bed reactor using ASPEN PLUS
Nikoo, M. B., & Mahinpey, N. (2008) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2008.02.020 · Cited by 559
Discrete particle-continuum fluid modelling of gas–solid fluidised beds
Kafui, K. D., Thornton, C., & Adams, M. J. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00140-9 · Cited by 461
Gil, J., Corella, J., Aznar, M., & Caballero, M. A. (1999) · Biomass and Bioenergy · doi:10.1016/s0961-9534(99)00055-0 · Cited by 460
Snider, D. M., Clark, S. M., & O'Rourke, P. J. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.12.042 · Cited by 451
Gasification of biomass: comparison of fixed bed and fluidized bed gasifier
Warnecke, R. (2000) · Biomass and Bioenergy · doi:10.1016/s0961-9534(00)00009-x · Cited by 398
Simulation of hydrogen production from biomass gasification in interconnected fluidized beds
Shen, L., Gao, Y., & Xiao, J. (2008) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2007.08.002 · Cited by 262
Chen, W.-H., Chen, C.-J., Hung, C.-I., Shen, C.-H., & Hsu, H.-W. (2013) · Applied Energy · doi:10.1016/j.apenergy.2013.01.034 · Cited by 223
Gerber, S., Behrendt, F., & Oevermann, M. (2010) · Fuel · doi:10.1016/j.fuel.2010.03.034 · Cited by 216
Meng, X., de Jong, W., Fu, N., & Verkooijen, A. H. M. (2011) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2011.03.028 · Cited by 202
Modeling of dense gas–solid reactive mixtures applied to biomass pyrolysis in a fluidized bed
Lathouwers, D., & Bellan, J. (2001) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(01)00059-3 · Cited by 136
Kumar, M., & Ghoniem, A. F. (2011) · Energy & Fuels · doi:10.1021/ef2008858 · Cited by 119
Qin, K., Jensen, P. A., Lin, W., & Jensen, A. D. (2012) · Energy & Fuels · doi:10.1021/ef300960x · Cited by 111
Modeling the thermochemical degradation of biomass inside a fast pyrolysis fluidized bed reactor
Bruchmüller, J., Wachem, B. G. M. V., Gu, S., Luo, K. H., & Brown, R. C. (2011) · AIChE Journal · doi:10.1002/aic.13705 · Cited by 102
Kern, S., Pfeifer, C., & Hofbauer, H. (2013) · Chemical Engineering Science · doi:10.1016/j.ces.2012.12.044 · Cited by 93
A CFD approach on the effect of particle size on char entrainment in bubbling fluidised bed reactors
Papadikis, K., Gu, S., & Bridgwater, A. V. (2009) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2009.09.007 · Cited by 36
Gerber, S., & Oevermann, M. (2013) · Fuel · doi:10.1016/j.fuel.2013.06.049 · Cited by 35
Cited by
Parameters and contact models for DEM simulations of agricultural granular materials: A review
Horabik, J., & Molenda, M. (2016) · Biosystems Engineering · doi:10.1016/j.biosystemseng.2016.02.017 · Cited by 468
CFD simulation of dense particulate reaction system: Approaches, recent advances and applications
Zhong, W., Yu, A., Zhou, G., Xie, J., & Zhang, H. (2016) · Chemical Engineering Science · doi:10.1016/j.ces.2015.09.035 · Cited by 301
Review and implementation of CFD-DEM applied to chemical process systems
Golshan, S., Sotudeh-Gharebagh, R., Zarghami, R., Mostoufi, N., Blais, B., & Kuipers, J. A. M. (2020) · Chemical Engineering Science · doi:10.1016/j.ces.2020.115646 · Cited by 270
Pashchenko, D. (2018) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2018.03.183 · Cited by 80
Metadata
- Authors
- Ku, X., Li, T., & Løvås, T.
- Venue
- Chemical Engineering Science
- Publisher
- Elsevier BV
- Published
- 2015-01
- Volume
- 122
- Pages
- 270-283
- ISSN
- 0009-2509 (ISSN-L)
- OpenAlex
- W1972952644
- Cited by
- 282
- References
- 27
- FWCI
- 5.46
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.