The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Co-Mn layered double hydroxide as an effective heterogeneous catalyst for degradation of organic dyes by activation of peroxymonosulfate
Abstract
In this study, Co-Mn layered double hydroxide (Co-Mn LDH) was synthesized, characterized, and tested as heterogeneous catalyst to activate peroxymonosulfate (PMS) for degradation of organic dyes. The results of characterization showed that Co-Mn LDH had high purity, uniform morphology and large specific surface area (49.9379 m2/g). The degradation experiments demonstrated that five different dyes with the concentration of 50 mg/L could be decomposed completely within 240 s using only 0.025 g/L of Co-Mn LDH and 0.1 g/L of PMS. Moreover, Co-Mn LDH/PMS system presented the highest decomposition efficiency for acid orange G (AOG) compared with other related materials under the same condition. Further investigation found that Co-Mn LDH/PMS system had an excellent adaptability in a wide pH range (from 3 to 10), and the best efficiency was achieved when the solution was natural (pH = 6.87). The mineralization of AOG was assessed by Total Organic Carbon (TOC), and 52.2% of TOC was removed. Meanwhile, the good reusability and high stability of Co-Mn LDH were demonstrated by recycle tests and ion-leaching tests. The catalytic mechanism was explored through quenching tests as well as X-ray photoelectron spectroscopy (XPS) analysis. Finally, all of the results suggested that Co-Mn LDH/PMS system with high stability and decomposition efficiency was suitable for the remediation of organic dyes in wastewater.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, J., & Wang, S. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.11.059 · Cited by 4,087
Ghanbari, F., & Moradi, M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.10.064 · Cited by 2,680
Cheng, M., Zeng, G., Huang, D., Lai, C., Xu, P., Zhang, C., & Liu, Y. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.09.001 · Cited by 1,250
Self-citationUltrathin Cobalt–Manganese Layered Double Hydroxide Is an Efficient Oxygen Evolution Catalyst
Song, F., & Hu, X. (2014) · Journal of the American Chemical Society · doi:10.1021/ja5096733 · Cited by 1,163
Activation of peroxymonosulfate by base: Implications for the degradation of organic pollutants
Qi, C., Liu, X., Ma, J., Lin, C., Li, X., & Zhang, H. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.02.089 · Cited by 1,125
Ren, Y., Lin, L., Ma, J., Yang, J., Feng, J., & Fan, Z. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.10.051 · Cited by 1,121
Guan, Y.-H., Ma, J., Ren, Y.-M., Liu, Y.-L., Xiao, J.-Y., Lin, L.-Q., & Zhang, C. (2013) · Water Research · doi:10.1016/j.watres.2013.06.023 · Cited by 1,037
Zou, J., Ma, J., Chen, L., Li, X., Guan, Y., Xie, P., & Pan, C. (2013) · Environmental Science & Technology · doi:10.1021/es4019145 · Cited by 780
Ding, Y., Zhu, L., Wang, N., & Tang, H. (2013) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2012.09.015 · Cited by 693
Transition metal/UV-based advanced oxidation technologies for water decontamination
Anipsitakis, G. P., & Dionysiou, D. D. (2004) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2004.05.025 · Cited by 606
Saputra, E., Muhammad, S., Sun, H., Ang, H. M., Tadé, M. O., & Wang, S. (2013) · Environmental Science & Technology · doi:10.1021/es400878c · Cited by 520
Gong, C., Chen, F., Yang, Q. X., Luo, K., Yao, F., Wang, S., Wang, X. L., Wu, J., Li, X., Wang, D., et al. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.117 · Cited by 496
Self-citationLi, X., Wang, Z., Zhang, B., Rykov, A. I., Ahmed, M. A., & Wang, J. (2016) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2015.08.050 · Cited by 473
Ji, Y., Fan, Y., Liu, K., Kong, D., & Lu, J. (2015) · Water Research · doi:10.1016/j.watres.2015.09.005 · Cited by 439
Yao, Y., Cai, Y., Wu, G., Wei, F., Li, X., Chen, H., & Wang, S. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2015.04.014 · Cited by 431
Shukla, P. R., Wang, S., Sun, H., Ang, H. M., & Tadé, M. (2010) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2010.09.006 · Cited by 415
Photochemical oxidation of reactive azo dye with UV–H2O2 process
Muruganandham, M. (2004) · Dyes and Pigments · doi:10.1016/j.dyepig.2003.12.006 · Cited by 412
Huang, Y.-H., Huang, Y., Huang, C.-I., & Chen, C. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2009.05.091 · Cited by 364
de Souza, S. M. D. A. G. U., Bonilla, K. A. S., & de Souza, A. A. U. (2010) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2010.02.053 · Cited by 332
Ganiyu, S. O., Huong Le, T. X., Bechelany, M., Esposito, G., van Hullebusch, E. D., Oturan, M. A., & Cretin, M. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09100h · Cited by 320
Jaafarzadeh, N., Ghanbari, F., & Ahmadi, M. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.036 · Cited by 320
Highly efficient removal of three red dyes by adsorption onto Mg–Al-layered double hydroxide
Shan, R.-R., Yan, L.-G., Yang, Y.-M., Yang, K., Yu, S.-J., Yu, H.-Q., Zhu, B.-C., & Du, B. (2015) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2014.03.019 · Cited by 288
Hisaindee, S., Meetani, M. A., & Rauf, M. A. (2013) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2013.03.011 · Cited by 285
Ji, F., Li, C., Wei, X., & Yu, J. (2013) · Chemical Engineering Journal · doi:10.1016/j.cej.2013.07.053 · Cited by 265
Zhao, J., Chen, J., Xu, S., Shao, M., Yan, D., Wei, M., Evans, D. G., & Duan, X. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta11452j · Cited by 260
Activation of peroxymonosulfate by microwave irradiation for degradation of organic contaminants
Qi, C., Liu, X., Lin, C., Zhang, H., Li, X., & Ma, J. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.01.012 · Cited by 258
Zou, Y., Wang, X., Wu, F., Yu, S., Hu, Y., Song, W., Liu, Y., Wang, H., Hayat, T., & Wang, X. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b02550 · Cited by 252
Luo, S., Duan, L., Sun, B., Wei, M., Li, X., & Xu, A. (2015) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2014.09.008 · Cited by 245
Zhang, M., Yao, Q., Lu, C., Li, Z., & Wang, W. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505765e · Cited by 234
Yu, X.-Y., Luo, T., Jia, Y., Xu, R.-X., Gao, C., Zhang, Y.-X., Liu, J.-H., & Huang, X.-J. (2012) · Nanoscale · doi:10.1039/c2nr30457k · Cited by 197
Wen, X.-J., Niu, C., Zhang, L., & Zeng, G. (2017) · Dalton Transactions · doi:10.1039/c7dt00106a · Cited by 142
Self-citationZhou, Q., Chen, F., Wu, W., Bu, R., Li, W., & Yang, F. H. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.10.004 · Cited by 123
Lu, H., Zhu, Z., Zhang, H., Zhu, J., Qiu, Y., Zhu, L., & Küppers, S. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b08933 · Cited by 122
Yan, J., Chen, Y., Qian, L., Gao, W., Ouyang, D., & Chen, M. (2017) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.05.007 · Cited by 119
Tokudome, Y., Morimoto, T., Tarutani, N., Vaz, P. D., Nunes, C. D., Prévot, V., Stenning, G. B. G., & Takahashi, M. (2016) · ACS Nano · doi:10.1021/acsnano.6b02110 · Cited by 108
Lin, H., Rong, H., Huang, W., Liao, Y., Xing, L., Xu, M., Xiao, L., & Li, W. S. (2014) · Journal of Materials Chemistry A · doi:10.1039/c4ta02666g · Cited by 98
Removal of Azo Dyes: Intercalation into Sonochemically Synthesized NiAl Layered Double Hydroxide
Pahalagedara, M. N., Samaraweera, M. A., Dharmarathna, S., Kuo, C., Pahalagedara, L. R., Gascón, J. A., & Suib, S. L. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp505260a · Cited by 93
Huang, X. T., Su, M., Zhou, J., Shu, W., Huang, Z.-F., Gao, N., & Qian, G. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.06.067 · Cited by 68
Yao, Y., Mao, Y., Huang, Q., Wang, L., Huang, Z., Lü, W., & Chen, W. (2013) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2013.10.063 · Cited by 61
Meetani, M. A., Hisaindee, S., Abdullah, F. H., Ashraf, S. M., & Rauf, M. A. (2010) · Chemosphere · doi:10.1016/j.chemosphere.2010.04.065 · Cited by 48
Synthesis Mechanism Study of Layered Double Hydroxides Based on Nanoseparation
Chang, Z., Wu, C., Song, S., et al. (2013) · Inorganic Chemistry · doi:10.1021/ic4008763 · Cited by 32
Lan, T., Lei, L., Yang, B., Zhang, X., & Li, Z. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303252y · Cited by 16
Cited by
Kohantorabi, M., Moussavi, G., & Giannakis, S. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127957 · Cited by 975
Duan, P., Qi, Y., Feng, S., Peng, X., Wang, W., Yue, Y., Shang, Y., Li, Y., Gao, B., & Xu, X. (2020) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2020.118717 · Cited by 417
Mn-based catalysts for sulfate radical-based advanced oxidation processes: A review
Huang, J., & Zhang, H. (2019) · Environment International · doi:10.1016/j.envint.2019.105141 · Cited by 328
Karim, A. V., Hassani, A., Eghbali, P., & Nidheesh, P. V. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100965 · Cited by 322
Gholami, P., Dinpazhoh, L., Khataee, A., Hassani, A., & Bhatnagar, A. (2020) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2019.120742 · Cited by 313
Metadata
- Authors
- Zhao, X., Niu, C., Zhang, L., Guo, H., Wen, X., Liang, C., & Zeng, G.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 204
- Pages
- 11-21
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2796379348
- Cited by
- 257
- References
- 42
- FWCI
- 11.35
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.