The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Hydrothermal conversion of dewatered sewage sludge: Focusing on the transformation mechanism and recovery of phosphorus
Abstract
The recovery of phosphorus from sewage sludge was critical due to the depletion of phosphate ore. The present research aims to identify the phosphorus speciation and reveal the phosphorus transformation mechanism of dewatered sewage sludge during hydrothermal conversion (HTC) process, as well as to achieve the high efficiency recovery of phosphorus. Multiple analysis of SMT method, VK diagram, XANES and NMR showed that most phosphorus (>80%) was transferred to the hydrochar and presented as inorganic phosphorus (IP) after the HTC process. A dehydration trend was observed of the HTC process with the increase of sub-critical temperature. Ca-associated phosphorus increased significantly as the temperature increased. The Pyro-P gradually transformed to Ortho-P with the increase of HTC temperature and disappeared at 320 °C. The addition of HCl (6.13 and 12.3 mmol/g) in the HTC process resulted in a high percentage (>80%) of phosphorus transferred to the aqueous phase, and the bioavailability of the residual phosphorus increased significantly. The recovery rate of phosphorus could achieve 98.37% at the pH of 7.52, with the struvite purity of 90.41%. The results of this study provide new insights into the selective transfer of phosphorus in dewatered sludge by HTC process, in addition to some efficient ways for the utilisation of the HTC products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Production of solid biochar fuel from waste biomass by hydrothermal carbonization
Liu, Z., Quek, A., Kent Hoekman, S., & Balasubramanian, R. (2013) · Fuel · doi:10.1016/j.fuel.2012.07.069 · Cited by 808
Danso-Boateng, E., Shama, G., Wheatley, A. D., Martin, S. J., & Holdich, R. G. (2015) · Bioresource Technology · doi:10.1016/j.biortech.2014.11.096 · Cited by 353
Cited by
Valorization of hydrothermal liquefaction aqueous phase: pathways towards commercial viability
Watson, J., Wang, T., Si, B., Chen, W.-T., Aierzhati, A., & Zhang, Y. (2020) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2019.100819 · Cited by 394
Khosravi, A., Zheng, H., Liu, Q., Hashemi, M., Tang, Y., & Xing, B. (2022) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.133142 · Cited by 286
Pecchi, M., Patuzzi, F., Benedetti, V., Di Maggio, R., & Baratieri, M. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106206 · Cited by 42
Metadata
- Authors
- Shi, Y., Luo, G., Rao, Y., Chen, H., & Zhang, S.
- Venue
- Chemosphere
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 228
- Pages
- 619-628
- ISSN
- 0045-6535 (ISSN-L)
- OpenAlex
- W2936370846
- Cited by
- 162
- References
- 2
- FWCI
- 12.85
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.