Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 36

The DOI matches its Crossref record; 70 of the 70 references it cites were found in a registry or an index.

Adsorption equilibrium and thermodynamics of anionic reactive dyes from aqueous solutions by using a new modified silica gel with 2,2′-(pentane-1,5-diylbis(oxy))dibenzaldehyde

Banaei, Alireza, Ebrahimi, Shabnam, Vojoudi, Hossein, Karimi, Soheyla, Badiei, Alireza, Pourbasheer, Eslam·2017·Chemical Engineering Research and Design
DOI 10.1016/j.cherd.2017.04.032
Open this paper in CoChat — free account

Abstract

Abstract The 2,2′-(pentane-1,5-diylbis(oxy))dibenzaldehyde (BP) functionalized silica gel (Si-APTES-BP) was synthesized successfully by a normal method and a inverse method. These new materials were characterized by Fourier Transform Infrared (FT-IR), Scanning Electron Microscopy (SEM), Thermogravimetric Analyzes (TGA) and Ultraviolet Visible (UV–vis). The modified silica gel with normal method was used as a sorbent for removal of anionic reactive dyes Reactive Blue 19 (RB19) and Reactive Yellow 84 (RY84) from their aqueous solutions by batch adsorption procedure. The batch adsorption experiments were performed to study the effect of various experimental parameters such as the solution pH, contact time, initial dye concentration, adsorbent dose and temperature. The results showed that the adsorption capacity of RB19 and RY84 dyes were enhanced with increase temperature of solution. The maximum uptake value for RB19 and RY84 dyes were obtained at pH 5 and pH 8, respectively. The isotherm data of both investigated dyes were analyzed by the Langmuir and Freundlich adsorption models. Based on the correlation coefficient values, it has been deduced that the Langmuir model is better fitted to the experimental data. The Langmuir maximum adsorption capacity of the Si-APTES-BP at 298 K was found to be 37.45 for RB19 and 32.36 mg/g for RY84, respectively. In addition, thermodynamic studies were conducted to calculate the changes in Gibbs free energy (ΔG°), enthalpy (ΔH°) and entropy (ΔS°). The negative values of ΔG° and the positive value of ΔH° indicated that the adsorption process of both investigated dyes was a spontaneous and endothermic process in nature. The reusability of Si-APTES-BP has proven that the adsorbent is durable and cost-effective. Therefore, the silica gel modified with 2,2′-(pentane-1,5-diylbis(oxy))dibenzaldehyde can be used as an effective adsorbent for the removal of anionic reactive dyes from aqueous solutions.

Overview

Integrity signals

Registry

Crossref · 10.1016/j.cherd.2017.04.032

Cites

70 of 70 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Research works printed but not linked: 4

  1. El-Bindary, 2016, Removal of reactive blue 19 from aqueous solution using rice straw fly ash, J. Mater. Environ. Sci., 7, 1023
  2. Koner, 2011, Adsorption kinetics and mechanism of methyl orange dye on modified silica gel factory waste, Int. J. Curr. Res., 33, 128
  3. Kushwaha, 2010, Enhanced adsorption of malachite green dye on chemically modified silica gel, J. Chem. Pharm. Res., 2, 34
  4. Özdemir, 2007, Color removal from textile wastewater in modified fixed bed zeolite column reactor and regeneration of zeolite bed, itüdergisi, 3, 35

Cited by

See all 36

Metadata

Authors
Banaei, A., Ebrahimi, S., Vojoudi, H., Karimi, S., Badiei, A., & Pourbasheer, E.
Venue
Chemical Engineering Research and Design
Publisher
Elsevier BV
Published
2017-07
Volume
123
Pages
50-62
ISSN
0263-8762
DOI
10.1016/j.cherd.2017.04.032
Cited by
36
References
70
Language
en
Licence
www.elsevier.com/tdm/userlicense/1.0/ (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.