Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 221

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Deep learning for diagnosis and classification of faults in industrial rotating machinery

Souza, Roberto M., Nascimento, Erick G.S., Miranda, Ubatan A., Silva, Wenisten J.D., Lepikson, Herman A. · 2021 · Computers & Industrial Engineering

Abstract

Abstract Application of deep-learning techniques has been increasing, which redefines state-of-the-art technology, especially in industrial applications such as fault diagnosis and classification. Therefore, implementing a system that can automatically detect faults at an early stage and recommend stopping of a machine to avoid unsafe conditions in the process and environment has become possible. This paper proposes the use of Predictive Maintenance model with Convolutional Neural Network (PdM-CNN), to classify automatically rotating equipment faults and advise when maintenance actions should be taken. This work uses data from only one vibration sensor installed on the motor-drive end bearing, which is the most common layout present in the industry. This work was developed under controlled ambient varying rotational speeds, load levels and severities, in order to verify whether it is possible to build a model capable of classifying such faults in rotating machinery using only one set of vibration sensors. The results showed that the accuracies of the PdM-CNN model were of 99.58% and 97.3%, when applied to two different publicly available databases. This demonstrates the model’s ability to accurately detect and classify faults in industrial rotating machinery. With this model companies can improve the financial performance of their rotating machine monitoring through reducing sensor acquisition costs for fault identification and classification problems, easing their way towards the digital transformation required for the fourth industrial revolution.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cie.2020.107060

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 5 references

Research works printed but not linked: 12

  1. Ahmad, 2019, A reliable technique for remaining useful life estimation of rolling element bearings using dynamic regression models, Reliability Engineering and System Safety, 184, 67, 10.1016/j.ress.2018.02.003 · DOI · Paper page
  2. Baptista, 2018, Forecasting fault events for predictive maintenance using data-driven techniques and ARMA modelling, Computer & Industrial Engineering, 115, 41, 10.1016/j.cie.2017.10.033 · DOI · Paper page
  3. Guo, 2016, Hierarchical adaptive deep convolution neural network and its application to bearing fault diagnosis, Measurement, 93, 490, 10.1016/j.measurement.2016.07.054 · DOI · Paper page
  4. Janssens, 2016, Convolutional Neural Network based fault detection for rotating machinery, Journal of Sound and Vibration, 377, 331, 10.1016/j.jsv.2016.05.027 · DOI · Paper page
  5. Khan, 2018, A review on the application of deep learning in system health management, Mechanical Systems and Signal Processing, 107, 241, 10.1016/j.ymssp.2017.11.024 · DOI · Paper page
  6. Lu, 2017, Assessment of data-driven, machine learning techniques for machinery prognostics of offshores assets, Offshore Technology Conference
  7. Marins, 2018, Improved similarity-based modeling for the classification of rotating-machine failures, Journal of the Franklin Institute, 355, 1913, 10.1016/j.jfranklin.2017.07.038 · doi:10.1016/j.jfranklin.2017.07.038
  8. Martins, D. H. C. S. S., Hemerly, D. O., Marins, M., Lima, A. A., Silva, F. L., Prego, T. M., Ribeiro, F. M. L., Netto, S. L., & Silva, E. A. B.. (2019) Application of machine learning to evaluate unbalance severity in rotating machines. Proceedings of the 10th International Conference on Rotor Dynamics – IFToMM, 61, (pp. 144-160). · doi:10.1007/978-3-319-99268-6_11
  9. Ribeiro, F. M. L., Marins, M. A., Netto, S. L., & da Silva, E. A. B. (2017). Rotating machinery fault diagnosis using similarity-based models. XXXV Simpósio Brasileiro de Telecomunicações e Processamento de Sinais - sbrt2017. · doi:10.14209/sbrt.2017.133
  10. Rocha, 2018, Aprendizado de máquina aplicado ao reconhecimento automático de falhas em máquinas rotativas, Universidade Federal de Minas Gerais.
  11. Xu, 2018, Aerial images and convolutional neural network for cotton bloom detection, Front. Plant Sci.
  12. Zhang, 2018, A deep convolutional neural network with new training methods for bearing fault diagnosis under noisy environment and different working load, Mechanical Systems and Signal Processing, 100, 439, 10.1016/j.ymssp.2017.06.022 · DOI · Paper page

Metadata

Authors
Souza, R. M., Nascimento, E. G. S., Miranda, U. A., Silva, W. J. D., & Lepikson, H. A.
Venue
Computers & Industrial Engineering
Publisher
Elsevier BV
Published
2021-03
Volume
153
Pages
107060
ISSN
0360-8352 (ISSN-L)
OpenAlex
W3112955596
Cited by
221
References
5
FWCI
10.80
Type
journal article
Language
en
Open access
closed
Licence
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
  • www.elsevier.com/legal/tdmrep-license (tdm)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Deep learning for diagnosis and classification of faults in industrial rotating machinery. https://app.cochat.ai/papers/10.1016/j.cie.2020.107060
The paper
Souza, R. M., Nascimento, E. G. S., Miranda, U. A., Silva, W. J. D., & Lepikson, H. A. (2021). Deep learning for diagnosis and classification of faults in industrial rotating machinery. Computers & Industrial Engineering. https://doi.org/10.1016/j.cie.2020.107060

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.