Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Sign Up
Cited by 632Advanced Welding Techniques AnalysisWelding Techniques and Residual StressesMechanical Behavior of Composites

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Joining of dissimilar materials

Open access
Martinsen, K., Hu, S.J., Carlson, B.E.·2015·CIRP Annals
DOI 10.1016/j.cirp.2015.05.006
Open this paper in CoChat — free accountOpen PDF

Abstract

Abstract Emerging trends in manufacturing such as light weighting, increased performance and functionality increases the use of multi-material, hybrid structures and thus the need for joining of dissimilar materials. The properties of the different materials are jointly utilised to achieve product performance. The joining processes can, on the other hand be challenging due to the same different properties. This paper reviews and summarizes state of the art research in joining dissimilar materials. Current and emerging joining technologies are reviewed according to the mechanisms of joint formation, i.e.; mechanical, chemical, thermal, or hybrid processes. Methods for process selection are described and future challenges for research on joining dissimilar materials are summarized.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1016/j.cirp.2015.05.006

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 1 references

Research works printed but not linked: 223

  1. Abe, 2012, Joining of High Strength Steel and Aluminium Alloy Sheets by Mechanical Clinching with Dies for Control of Metal Flow, Journal of Materials Processing Technology, 212, 884, 10.1016/j.jmatprotec.2011.11.015 · DOI
  2. Adams, 2000, Joining Using Adhesives, Assembly Automation, 20, 109, 10.1108/01445150010321724 · DOI
  3. Akbarimousavi, 2011, Investigations on the Mechanical Properties and Microstructure of Dissimilar CP-Titanium and AISI 316L Austenitic Stainless Steel Continuous Friction Welds, Materials & Design, 32, 3066, 10.1016/j.matdes.2010.12.057 · DOI
  4. Al-Jamal, 2008, Characteristics of the Bond in CuH13 Tool Steel Parts Fabricated Using SLM, CIRP Annals-Manufacturing Technology, 57, 239, 10.1016/j.cirp.2008.03.010 · DOI
  5. Alfano, 2001, Finite Element Interface Models for the Delamination Analysis of Laminated Composites: Mechanical and Computational Issues, International Journal for Numerical Methods in Engineering, 50, 1701, 10.1002/nme.93 · DOI · Paper page
  6. Alves, 2012, Experimental Determination of Temperature During Rotary Friction Welding of AA1050 Aluminum with AISI 304 Stainless Steel, Journal of Aerospace Technology and Management, 4, 61, 10.5028/jatm.2012.04013211 · DOI
  7. Amancio Filho, 2011, Friction Riveting: Development and Analysis of a New Joining Technique for Polymer–Metal Multi-material Structures, Welding in the World, 55, 13, 10.1007/BF03263511 · DOI
  8. Ambroziak, 2014, Friction Welding of Aluminium and Aluminium Alloys with Steel, Advances in Materials Science and Engineering, 2014, 1, 10.1155/2014/981653 · DOI
  9. Annoni, 2011, Ultrasonic Metal Welding of AA 6022-T4 Lap Joints: Part I—Technological Characterisation and Static Mechanical Behaviour, Science and Technology of Welding & Joining, 16, 107, 10.1179/1362171810Y.0000000014 · DOI
  10. Ashby, 2004, Selection Strategies for Materials and Processes, Materials & Design, 25, 51, 10.1016/S0261-3069(03)00159-6 · DOI · Paper page
  11. Ashfaq, 2014, Comparing Bond Formation Mechanism Between Similar and Dissimilar Aluminium Alloy Friction Welds, Materials Science and Technology (United Kingdom), 30, 329, 10.1179/1743284713Y.0000000360 · DOI
  12. Ashfaq, 2013, Improving Strength of Stainless Steel/Aluminum Alloy Friction Welds by Modifying Faying Surface Design, Journal of Materials Engineering and Performance, 22, 376, 10.1007/s11665-012-0278-0 · DOI
  13. Bahrami, 2015, Study of Mass Transport in Autogenous GTA Welding of Dissimilar Metals, International Journal of Heat and Mass Transfer, 85, 41, 10.1016/j.ijheatmasstransfer.2015.01.074 · DOI
  14. Bahraminasab, 2014, Multi-objective Design Optimization of Functionally Graded Material for the Femoral Component of a Total Knee Replacement, Materials & Design, 53, 159, 10.1016/j.matdes.2013.06.050 · DOI
  15. Baldan, 2004, Adhesively-bonded Joints and Repairs in Metallic Alloys, Polymers and Composite Materials: Adhesives, Adhesion Theories and Surface Pretreatment, Journal of Materials Science, 39, 1, 10.1023/B:JMSC.0000007726.58758.e4 · DOI
  16. Baldan, 2012, Adhesion Phenomena in Bonded Joints, International Journal of Adhesion and Adhesives, 38, 95, 10.1016/j.ijadhadh.2012.04.007 · DOI
  17. Barnes, 2000, Joining Techniques for Aluminium Spaceframes Used in Automobiles: Part II—Adhesive Bonding and Mechanical Fasteners, Journal of Materials Processing Technology, 99, 72, 10.1016/S0924-0136(99)00361-1 · DOI
  18. Barrena, 2014, Numerical Simulation and Experimental Analysis of Vacuum Brazing for Steel/Cermet, Ceramics International, 40, 10557, 10.1016/j.ceramint.2014.03.033 · DOI
  19. Bassani, 2007, Effect of Process Parameters on Bead Properties of A359/SiC MMCs Welded by Laser, Composites, A: Applied Science and Manufacturing, 38, 1089, 10.1016/j.compositesa.2006.04.014 · DOI
  20. Belmonte, 2010, Spark Plasma Sintering: A Powerful Tool to Develop New Silicon Nitride-Based Materials, Journal of the European Ceramic Society, 30, 2937, 10.1016/j.jeurceramsoc.2010.01.025 · DOI
  21. Beyeler, 1988, Experimental Investigation of Laser-Assisted Thermoplastic Tape Consolidation, Journal of Thermoplastic Composite Materials, 1, 107, 10.1177/089270578800100109 · DOI
  22. Bhamji, 2012, Linear Friction Welding of Aluminium to Magnesium, Science and Technology of Welding and Joining, 17, 368, 10.1179/1362171812Y.0000000017 · DOI
  23. Blaga, 2013, Friction Riveting of Glass–Fibre-Reinforced Polyetherimide Composite and Titanium Grade 2 Hybrid Joints, Materials & Design, 50, 825, 10.1016/j.matdes.2013.03.061 · DOI
  24. Borges, 2012, Development of Computational Models to Predict the Mechanical Behavior of Friction Riveting Joints, Computational Materials Science, 54, 7, 10.1016/j.commatsci.2011.10.031 · DOI
  25. Boyce, 2000, Constitutive Model for the Finite Deformation Stress–Strain Behavior of Poly(Ethylene Terephthalate) above the Glass Transition, Polymer, 41, 2183, 10.1016/S0032-3861(99)00406-1 · DOI
  26. Buffa, 2006, Friction Stir Welding of Tailored Blanks: Investigation on Process Feasibility, CIRP Annals-Manufacturing Technology, 55, 279, 10.1016/S0007-8506(07)60416-8 · DOI
  27. Calliari, 2004, Characterization of Vacuum Brazed Joints for Superconducting Cavities, Microchimica Acta, 147, 141
  28. Camillo, 2011, Going with the flow, Assembly, 54, 44
  29. Campbell, 2011, Joining: Understanding the Basics, ASM International
  30. Campilho, 2013, Modelling Adhesive Joints with Cohesive Zone Models: Effect of the Cohesive Law Shape of the Adhesive Layer, International Journal of Adhesion and Adhesives, 44, 48, 10.1016/j.ijadhadh.2013.02.006 · DOI
  31. Catalanotti, 2011, An Efficient Design Method for Multi-Material Bolted Joints Used in the Railway Industry, Composite Structures, 94, 246, 10.1016/j.compstruct.2011.06.018 · DOI
  32. Centeno, 2012, Fabrication of C/SiC Composites by Combining Liquid Infiltration Process and Spark Plasma Sintering Technique, Ceramics International, 38, 2171, 10.1016/j.ceramint.2011.10.060 · DOI
  33. Chakraborty, 2007, Modelling of Turbulent Molten Pool Convection in Laser Welding of a Copper–Nickel Dissimilar Couple, International Journal of Heat and Mass Transfer, 50, 1805, 10.1016/j.ijheatmasstransfer.2006.10.030 · DOI
  34. Chalkley, 1999, Development of a Generic Repair Joint for Certification of Bonded Composite Repairs, International Journal of Adhesion and Adhesives, 19, 121, 10.1016/S0143-7496(98)90028-8 · DOI
  35. Cheepu, 2012, Friction Welding of Titanium to 304 Stainless Steel with Electroplated Nickel Interlayer, Materials Science Forum, 710, 620, 10.4028/www.scientific.net/MSF.710.620 · DOI
  36. Chen, 2014, Microstructure and Mechanical Properties of Dissimilar Welded Ti3Al/Ni-Based Superalloy Joint Using a NiCu Filler Alloy, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46, 756, 10.1007/s11661-014-2652-z · DOI
  37. Chen, 2011, Joining Mechanism of Ti/Al Dissimilar Alloys During Laser Welding-Brazing Process, Journal of Alloys and Compounds, 509, 891, 10.1016/j.jallcom.2010.09.125 · DOI
  38. Choi, 2010, A Hybrid Joining Technology for Aluminum/Zinc Coated Steels in Vehicles, Journal of Materials Science & Technology, 26, 858, 10.1016/S1005-0302(10)60137-5 · DOI
  39. Chung, 1999, Mass, Momentum, and Energy Transport in a Molten Pool when Welding Dissimilar Metals, Journal of Heat Transfer, 121, 451, 10.1115/1.2825999 · DOI
  40. Chuvildeev, 2014, Structure and Properties of Advanced Materials Obtained by Spark Plasma Sintering, Acta Astronautica, 109, 172, 10.1016/j.actaastro.2014.11.008 · DOI
  41. Coelho, 2012, Friction-Stir Dissimilar Welding of Aluminium Alloy to High Strength Steels: Mechanical Properties and their Relation to Microstructure, Materials Science and Engineering, A, 556, 175, 10.1016/j.msea.2012.06.076 · DOI
  42. Cole, 2014, Weld Temperature Effects During Friction Stir Welding of Dissimilar Aluminum Alloys 6061-T6 and 7075-T6, The International Journal of Advanced Manufacturing Technology, 71, 643, 10.1007/s00170-013-5485-9 · DOI
  43. Cuvilliez, 2012, A Finite Element Approach Coupling a Continuous Gradient Damage Model and a Cohesive Zone Model WITHIN the Framework of Quasi–Brittle Failure, Computer Methods in Applied Mechanics and Engineering, 237–240, 244, 10.1016/j.cma.2012.04.019 · DOI
  44. De Moura, 2008, Cohesive and Continuum Mixed-Mode Damage Models Applied to the Simulation of the Mechanical Behaviour of Bonded Joints, International Journal of Adhesion and Adhesives, 28, 419, 10.1016/j.ijadhadh.2008.04.004 · DOI
  45. Diouf, 2012, Densification Mechanisms in Spark Plasma Sintering: Effect of Particle Size and Pressure, Powder Technology, 221, 220, 10.1016/j.powtec.2012.01.005 · DOI
  46. Doraiswamy, 2007, Laser Processing of Natural Mussel Adhesive Protein Thin Films, Materials Science and Engineering, C, 27, 409, 10.1016/j.msec.2006.05.026 · DOI
  47. Dupaix, 2007, Constitutive Modeling of the Finite Strain Behavior of Amorphous Polymers in and Above the Glass Transition, Mechanics of Materials, 39, 39, 10.1016/j.mechmat.2006.02.006 · DOI
  48. Enz, 2014, Laser Welding of High-strength Aluminium Alloys for the Sheet Metal Forming Process, Procedia CIRP, 18, 203, 10.1016/j.procir.2014.06.132 · DOI
  49. Esawi, 2004, Computer-Based Selection of Joining Processes: Methods, Software and Case Studies, Materials & Design, 25, 555, 10.1016/j.matdes.2004.03.002 · DOI
  50. Fan, 2004, A Unified Model of Transport Phenomena in Gas Metal Arc Welding Including Electrode, Arc Plasma and Molten Pool, Journal of Physics D: Applied Physics, 37, 2531, 10.1088/0022-3727/37/18/009 · DOI
  51. Fink, 2010, Hybrid CFRP/Titanium Bolted Joints: Performance Assessment and Application to a Spacecraft Payload Adaptor, Composites Science and Technology, 70, 305, 10.1016/j.compscitech.2009.11.002 · DOI
  52. Fleischer, 2013, Joining Automotive Space Frame Structures by Filament Winding, CIRP Journal of Manufacturing Science and Technology, 6, 98, 10.1016/j.cirpj.2013.02.003 · DOI
  53. Fonda, 2004, Development of Grain Structure During Friction Stir Welding, Scripta Materialia, 51, 243, 10.1016/j.scriptamat.2004.04.017 · DOI
  54. Fratini, 2013, On the Linear Friction Welding Process of Aluminum Alloys: Experimental Insights Through Process Monitoring, CIRP Annals-Manufacturing Technology, 62, 295, 10.1016/j.cirp.2013.03.056 · DOI
  55. Fukumoto, 2013, Estimation of Current Path Area During Small Scale Resistance Spot Welding of Bulk Metallic Glass to Stainless Steel, Science and Technology of Welding and Joining, 18, 135, 10.1179/1362171812Y.0000000085 · DOI
  56. Gao, 2009, A New One-Sided Joining Process for Aluminum Alloys: Friction Stir Blind Riveting, Journal of Manufacturing Science and Engineering, 131, 061002, 10.1115/1.4000311 · DOI
  57. Goushegir, 2014, Friction Spot Joining of Aluminum AA2024/Carbon–Fiber Reinforced Poly(Phenylene Sulfide) Composite Single Lap Joints: Microstructure and Mechanical Performance, Materials & Design, 54, 196, 10.1016/j.matdes.2013.08.034 · DOI
  58. Groche, 2012, Integration of Manufacturing-Induced Properties in Product Design, CIRP Annals-Manufacturing Technology, 61, 163, 10.1016/j.cirp.2012.03.041 · DOI
  59. Grong, 2012, Recent Advances in Solid-State Joining of Aluminium, Welding Journal, 91, 26
  60. Grujicic, 2008, An Overview of the Polymer-to-Metal Direct-Adhesion Hybrid Technologies For Load-Bearing Automotive Components, Journal of Materials Processing Technology, 197, 363, 10.1016/j.jmatprotec.2007.06.058 · DOI
  61. Guillard, 2007, Densification of SiC by SPS—effects of Time, Temperature and Pressure, Journal of the European Ceramic Society, 27, 2725, 10.1016/j.jeurceramsoc.2006.10.005 · DOI
  62. Guo, 2014, Friction Stir Welding of Dissimilar Materials Between AA6061 and AA7075 Al Alloys Effects of Process Parameters, Materials & Design, 56, 185, 10.1016/j.matdes.2013.10.082 · DOI
  63. Hayat, 2011, The Effects of the Welding Current on Heat Input, Nugget Geometry, and the Mechanical and Fractural Properties of Resistance Spot Welding on Mg/Al Dissimilar Materials, Materials & Design, 32, 2476, 10.1016/j.matdes.2010.11.015 · DOI
  64. He, 2008, Self-Pierce Riveting for Sheet Materials: State of the Art, Journal of Materials Processing Technology, 199, 27, 10.1016/j.jmatprotec.2007.10.071 · DOI
  65. Henrob, 2014, Available from 〈www.henrob.com〉 [cited 2014 18.08.2014]
  66. Ho, 1985, Chemical Bonding and Reaction at Metal/Polymer Interfaces, Journal of Vacuum Science & Technology, A, 3, 739, 10.1116/1.573298 · DOI
  67. Hoang, 2012, Structural Behaviour of Aluminium Self-Piercing Riveted Joints: An Experimental and Numerical Investigation, International Journal of Solids and Structures, 49, 3211, 10.1016/j.ijsolstr.2012.05.039 · DOI
  68. Hovanski, 2014, Comparing Laser Welding Technologies with Friction Stir Welding for Production of Aluminum Tailor-Welded Blanks, SAE International Journal of Materials and Manufacturing, 7, 537, 10.4271/2014-01-0791 · DOI
  69. Hu, 2014, Assembly, CIRP Encyclopedia of Production Engineering, 50, 10.1007/978-3-642-20617-7_6616 · DOI
  70. Hu, 2012, Heat and Mass Transfer in Laser Dissimilar Welding of Stainless Steel and Nickel, Applied Surface Science, 258, 5914, 10.1016/j.apsusc.2012.02.143 · DOI
  71. Huang, 2009, Microstructural Evolution of DP980 Steel During Friction Bit Joining, Metallurgical and Materials Transactions, A: Physical Metallurgy and Materials Science, 40, 2994, 10.1007/s11661-009-0016-x · DOI
  72. Hulbert, 2009, A Discussion on the Absence of Plasma in Spark Plasma Sintering, Scripta Materialia, 60, 835, 10.1016/j.scriptamat.2008.12.059 · DOI
  73. Hulbert, 2009, The Synthesis and Consolidation of Hard Materials by Spark Plasma Sintering, International Journal of Refractory Metals and Hard Materials, 27, 367, 10.1016/j.ijrmhm.2008.09.011 · DOI
  74. Humpston, 1994, Diffusion Soldering for Electronics Manufacturing, Endeavour, 18, 55, 10.1016/0160-9327(94)90063-9 · DOI
  75. Hwang, 2007, Dissimilar Metal Welding of Steel to Al–Mg Alloy by Spot Resistance Welding, Advanced Materials Research, 381
  76. Ikeuchi, 2009, Effects of Carbon Content on Intermetallic Compound Layer and Joint Strength in Friction Welding of Al Alloy to Steel, Welding in the World, 53, R135, 10.1007/BF03266718 · DOI
  77. Iyer, 2005, Fatigue of Single-and Double-Rivet Self-Piercing Riveted Lap Joints, Fatigue & Fracture of Engineering Materials & Structures, 28, 997, 10.1111/j.1460-2695.2005.00938.x · DOI
  78. Jadoon, 2004, Metal to Ceramic Joining via a Metallic Interlayer Bonding Technique, Journal of Materials Processing Technology, 152, 257, 10.1016/j.jmatprotec.2003.10.005 · DOI
  79. Juhl, 2013, Predicting the Laser Weldability of Dissimilar Polymers, Polymer, 54, 3891, 10.1016/j.polymer.2013.05.053 · DOI
  80. Kannan, 2012, Behaviour of Dissimilar Friction Welds with the Introduction of Silver Interlayer, Applied Mechanics and Materials, 224, 178, 10.4028/www.scientific.net/AMM.224.178 · DOI
  81. Kapidžić, 2014, Conceptual Studies of a Composite–Aluminum Hybrid Wing Box Demonstrator, Aerospace Science and Technology, 32, 42, 10.1016/j.ast.2013.11.002 · DOI
  82. Khaled, 2005, An Outsider Looks at Friction Stir Welding, Federal Aviation Administration, 25, 27
  83. Kim, 2011, Process Robustness of Single Lap Ultrasonic Welding of Thin, Dissimilar Materials, CIRP Annals—Manufacturing Technology, 60, 17, 10.1016/j.cirp.2011.03.016 · DOI
  84. Kimura, 2011, Effect of Friction Pressure on Joining Phenomena of Friction Welds between Pure Titanium and Pure Copper, Science and Technology of Welding and Joining, 16, 392, 10.1179/1362171811Y.0000000009 · DOI
  85. Kudo, 2000, Multi-arm Robot Control System for Manipulation of Flexible Materials in Sewing Operation, Mechatronics, 10, 371, 10.1016/S0957-4158(99)00047-1 · DOI
  86. Kurt, 2011, Effect of Friction Welding Parameters on Mechanical and Microstructural Properties of Dissimilar AISI 1010-ASTM B22 Joints, Welding Journal, 90, 102-s
  87. Lathabai, 2011, Friction Stir Blind Riveting: A Novel Joining Process for Automotive Light Alloys, SAE International Journal of Materials and Manufacturing, 4, 589, 10.4271/2011-01-0477 · DOI
  88. Lazarevic, 2013, Experimental Analysis of Friction Stir Forming for Dissimilar Material Joining Application, Journal of Manufacturing Processes, 15, 616, 10.1016/j.jmapro.2013.05.004 · DOI
  89. LeBacq, 2002, Selection of Joining Methods in Mechanical Design, Materials & Design, 23, 405, 10.1016/S0261-3069(01)00093-0 · DOI
  90. Lee, 2013, Characterization of Joint Quality in Ultrasonic Welding of Battery Tabs, Journal of Manufacturing Science and Engineering, 135, 021004, 10.1115/1.4023364 · DOI
  91. Leger, 2013, A study of the Impact of Humid Aging on the Strength of Industrial Adhesive Joints, International Journal of Adhesion and Adhesives, 44, 66, 10.1016/j.ijadhadh.2013.02.001 · DOI
  92. Levy, 2003, Rapid Manufacturing and Rapid Tooling with Layer Manufacturing (LM) Technologies, State of the Art and Future Perspectives, CIRP Annals—Manufacturing Technology, 52, 589, 10.1016/S0007-8506(07)60206-6 · DOI · Paper page
  93. Li, 2014, Effect of Friction Time on Mechanical and Metallurgical Properties of Continuous Drive Friction Welded Ti6Al4V/SUS321 Joints, Materials and Design, 56, 649, 10.1016/j.matdes.2013.11.065 · DOI · Paper page
  94. Li, 2014, Dissimilar Welding of H62 Brass-316L Stainless Steel Using Continuous-Wave Nd:YAG Laser, Materials and Manufacturing Processes, 29, 916, 10.1080/10426914.2013.822981 · DOI
  95. Liao, 2013, Experimental and FEM Studies on Mechanical Properties of Single-lap Adhesive Joint with Dissimilar Adherends Subjected to Impact Tensile Loadings, International Journal of Adhesion and Adhesives, 44, 91, 10.1016/j.ijadhadh.2013.02.007 · DOI
  96. Liu, 2014, Joining of Metal to Plastic Using Friction Lap Welding, Materials & Design, 54, 236, 10.1016/j.matdes.2013.08.056 · DOI · Paper page
  97. Liu, 2014, Interfacial Microstructural Characterization of Ti/Al Joints by Gas Tungsten Arc Welding, Materials and Manufacturing Processes, 29, 969, 10.1080/10426914.2013.864414 · DOI
  98. Liu, 2014, A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys, Materials, 7, 3735, 10.3390/ma7053735 · DOI
  99. Liu, 2010, The Mechanisms of Resistance Spot Welding of Magnesium to Steel, Metallurgical and Materials Transactions A, 41, 2651, 10.1007/s11661-010-0333-0 · DOI
  100. Liu, 2003, In Situ Joining of Dissimilar Nanocrystalline Materials by Spark Plasma Sintering, Scripta Materialia, 48, 1225, 10.1016/S1359-6462(03)00074-5 · DOI
  101. Lovatt, 1998, Manufacturing Process Selection in Engineering Design. Part 1: The Role of Process Selection, Materials & Design, 19, 205, 10.1016/S0261-3069(98)00038-7 · DOI
  102. Luo, 2014, A New Current Hybrid Inertia Friction Welding for Nickel-based Superalloy K418-Alloy Steel 42CrMo Dissimilar Metals, International Journal of Advanced Manufacturing Technology, 70, 1673, 10.1007/s00170-013-5441-8 · DOI
  103. Luo, 2012, Radial Friction Welding Interface between Brass and High Carbon Steel, Journal of Materials Processing Technology, 212, 385, 10.1016/j.jmatprotec.2011.10.001 · DOI
  104. Luo, 2004, Fabrication and Mechanical Evaluation of SiC–TiC Nanocomposites by SPS, Materials Letters, 58, 150, 10.1016/S0167-577X(03)00434-8 · DOI
  105. Ma, 2008, Friction Stir Processing Technology: A Review, Metallurgical and Materials Transactions, A, 39, 642, 10.1007/s11661-007-9459-0 · DOI
  106. Maropoulos, 1999, Aggregate Product and Process Modelling for the Welding of Complex Fabrications, CIRP Annals—Manufacturing Technology, 48, 401, 10.1016/S0007-8506(07)63212-0 · DOI
  107. Meco, 2015, Application of Laser in Seam Welding of Dissimilar Steel to Aluminium Joints for Thick Structural Components, Optics and Lasers in Engineering, 67, 22, 10.1016/j.optlaseng.2014.10.006 · DOI
  108. Meschut, 2014, Innovative Joining Technologies for Multi-material Structures, Welding in the World, 58, 65, 10.1007/s40194-013-0098-3 · DOI
  109. Meschut, 2014, Innovative and Highly Productive Joining Technologies for Multi-Material Lightweight Car Body Structures, Journal of Materials Engineering and Performance, 23, 1515, 10.1007/s11665-014-0962-3 · DOI
  110. Michalos, 2010, Automotive Assembly Technologies Review: Challenges and Outlook for a Flexible and Adaptive Approach, CIRP Journal of Manufacturing Science and Technology, 2, 81, 10.1016/j.cirpj.2009.12.001 · DOI
  111. Miles, 2010, Spot Joining of AA 5754 and High Strength Steel Sheets by Consumable Bit, Science and Technology of Welding and Joining, 15, 325, 10.1179/136217110X12707333260491 · DOI
  112. Miles, 2009, Solid State Spot Joining of Sheet Materials Using Consumable Bit, Science and Technology of Welding and Joining, 14, 72, 10.1179/136217108X341193 · DOI
  113. Min, 2014, Friction Stir Blind Riveting of Carbon Fiber Reinforced Polymer Composite and Aluminum Alloy Sheets, The International Journal of Advanced Manufacturing Technology, 76, 1403
  114. Miriyev, 2014, Steel to Titanium Solid State Joining Displaying Superior Mechanical Properties, Journal of Materials Processing Technology, 214, 2884, 10.1016/j.jmatprotec.2014.06.026 · DOI
  115. Miriyev, 2013, Titanium to Steel Joining by Spark Plasma Sintering (SPS) Technology, Journal of Materials Processing Technology, 213, 161, 10.1016/j.jmatprotec.2012.09.017 · DOI
  116. Mishra, 2005, Friction Stir Welding and Processing, Materials Science and Engineering: R: Reports, 50, 1, 10.1016/j.mser.2005.07.001 · DOI
  117. Misirli, 2012, Temperature Determination of St–Al Joints during Friction Welding, Advanced Materials Research, 1538
  118. Mitelea, 2013, Experiments on the Advantages and Limits of Using Conventional Friction Welding for Joining Dissimilar and Graded Materials, Surface Engineering and Applied Electrochemistry, 49, 51, 10.3103/S1068375513010080 · DOI
  119. Mittal, 2015, Microstructures and Mechanical Properties of Dissimilar T91/347H Steel Weldments, Journal of Materials Processing Technology, 220
  120. Miyamoto, 2009, Dissimilar Joining of Aluminum Alloy and Steel by Resistance Spot Welding, SAE International Journal of Materials and Manufacturing, 2, 58, 10.4271/2009-01-0034 · DOI
  121. Mori, 2013, Joining by Plastic Deformation, CIRP Annals—Manufacturing Technology, 62, 673, 10.1016/j.cirp.2013.05.004 · DOI
  122. Mori, 2006, Plastic Joining of Ultra High Strength Steel and Aluminium Alloy Sheets by Self Piercing Rivet, CIRP Annals—Manufacturing Technology, 55, 283, 10.1016/S0007-8506(07)60417-X · DOI
  123. Mortazavi, 2011, Investigation on Joint Strength of Dissimilar Resistance Spot Welds of Aluminum Alloy and Low Carbon Steel, Advanced Materials Research, 264, 384, 10.4028/www.scientific.net/AMR.264-265.384 · DOI
  124. Mubiayi, 2013, Friction Stir Welding of Dissimilar Materials: An Overview, Journal of Mechanical, Industrial Science and Engineering, 7, 6
  125. Mucha, 2011, The Analysis of Lock Forming Mechanism in the Clinching Joint, Materials & Design, 32, 4943, 10.1016/j.matdes.2011.05.045 · DOI
  126. Munir, 2006, The Effect of Electric Field and Pressure on the Synthesis and Consolidation of Materials: A Review of the Spark Plasma Sintering Method, Journal of Materials Science, 41, 763, 10.1007/s10853-006-6555-2 · DOI
  127. Muralimohan, 2013, Friction Welding of Type 304 Stainless Steel to Cptitanium Using Nickel Interlayer, Advanced Materials Research, 351, 10.4028/www.scientific.net/AMR.794.351 · DOI
  128. Muralimohan, 2014, The Influence of Aluminium Intermediate Layer in Dissimilar Friction Welds, International Journal of Materials Research, 105, 350, 10.3139/146.111031 · DOI
  129. Murr, 2010, A Review of FSW Research on Dissimilar Metal and Alloy Systems, Journal of Materials Engineering and Performance, 19, 1071, 10.1007/s11665-010-9598-0 · DOI
  130. Nandan, 2008, Recent Advances in Friction–Stir Welding—Process, Weldment Structure and Properties, Progress in Materials Science, 53, 980, 10.1016/j.pmatsci.2008.05.001 · DOI · Paper page
  131. Neugebauer, 2008, Advances in Mechanical Joining of Magnesium, CIRP Annals—Manufacturing Technology, 57, 283, 10.1016/j.cirp.2008.03.025 · DOI
  132. Ni, 2011, Study on the Resistance Spot Microwelding Parameters of Copper and Nickel-Plated Steel Dissimilar Metals, Advanced Materials Research, 391–392, 165, 10.4028/www.scientific.net/AMR.391-392.165 · DOI
  133. Ninive, 2014, Detailed Atomistic Insight into the β″ Phase in Al–Mg–Si Alloys, Acta Materialia, 69, 126, 10.1016/j.actamat.2014.01.052 · DOI
  134. Oikawa, 1999, Resistance Spot Welding of Steel and Aluminium Sheet Using Insert Metal Sheet, Science and Technology of Welding and Joining, 4, 80, 10.1179/136217199101537608 · DOI
  135. Okuni, 2014, Joining of Silicon Carbide and Graphite by Spark Plasma Sintering, Ceramics International, 40, 1359, 10.1016/j.ceramint.2013.07.017 · DOI
  136. Okuni, 2014, Spark Plasma Sintering of Tungsten/Graphite Joints with a SiC Ceramic Interlayer, Ceramics International, 41, 4651, 10.1016/j.ceramint.2014.12.010 · DOI
  137. Parashar, 2012, Adhesively Bonded Composite Tubular Joints: Review, International Journal of Adhesion and Adhesives, 38, 58, 10.1016/j.ijadhadh.2012.05.004 · DOI
  138. Pflug, 2006, Sandwich Materials Selection Charts, Journal of Sandwich Structures and Materials, 8, 407, 10.1177/1099636206065521 · DOI
  139. Qi, 2010, Interfacial Structure of the Joints between Magnesium Alloy and Mild Steel with Nickel as Interlayer by Hybrid Laser-TIG Welding, Materials & Design, 31, 605, 10.1016/j.matdes.2009.06.043 · DOI
  140. Qiu, 2009, The Influence of Reaction Layer on the Strength of Aluminum/Steel Joint Welded by Resistance Spot Welding, Materials Characterization, 60, 156, 10.1016/j.matchar.2008.07.005 · DOI
  141. Qiu, 2009, Interfacial Microstructure and Strength of Steel/Aluminum Alloy Joints Welded by Resistance Spot Welding With Cover Plate, Journal of Materials Processing Technology, 209, 4186, 10.1016/j.jmatprotec.2008.11.003 · DOI
  142. Qiu, 2009, Effect of Interfacial Reaction Layer Continuity on the Tensile Strength of Resistance Spot Welded Joints between Aluminum Alloy and Steels, Materials & Design, 30, 3686, 10.1016/j.matdes.2009.02.012 · DOI
  143. Qiu, 2010, Interfacial Characterization of Joint between Mild Steel and Aluminum Alloy Welded by Resistance Spot Welding, Materials Characterization, 61, 684, 10.1016/j.matchar.2010.03.015 · DOI
  144. Qiu, 2011, Resistance Spot Welding between Aluminum Alloy and Low-Carbon Steel, Advanced Materials Research, 189–193, 3534, 10.4028/www.scientific.net/AMR.189-193.3534 · DOI
  145. Qiu, 2011, Joining Phenomena of Resistance Spot Welded Joint between Titanium and Aluminum Alloy, Advanced Materials Research, 230, 982, 10.4028/www.scientific.net/AMR.230-232.982 · DOI
  146. Rai, 2011, Review: Friction Stir Welding Tools, Science and Technology of Welding and Joining, 16, 325, 10.1179/1362171811Y.0000000023 · DOI
  147. Raykhere, 2010, Dynamic Shear Strength of Adhesive Joints Made of Metallic and Composite Adherents, Materials & Design, 31, 2102, 10.1016/j.matdes.2009.10.043 · DOI
  148. Rizzo, 2014, Joining of C/SiC Composites by Spark Plasma Sintering Technique, Journal of the European Ceramic Society, 34, 903, 10.1016/j.jeurceramsoc.2013.10.028 · DOI
  149. Rohde, 2009, Joining of Alumina and Steel by a Laser Supported Brazing Process, Ceramics International, 35, 333, 10.1016/j.ceramint.2007.11.007 · DOI
  150. Rotundo, 2013, Dissimilar Linear Friction Welding Between a SiC Particle Reinforced Aluminum Composite and a Monolithic Aluminum Alloy: Microstructural, Tensile and Fatigue Properties, Materials Science and Engineering, A, 559, 852, 10.1016/j.msea.2012.09.033 · DOI
  151. Roulin, 1999, Strength and Structure of Furnace-brazed Joints between Aluminum and Stainless Steel, Welding Journal (New York), 78, 151
  152. Sahin, 1998, Analysis of the Friction Welding Process in Relation to the Welding of Copper and Steel Bars, Journal of materials processing technology, 82, 127, 10.1016/S0924-0136(98)00032-6 · DOI
  153. Sahin, 2005, Joining with Friction Welding of High-Speed Steel and Medium-Carbon Steel, Journal of Materials Processing Technology, 168, 202, 10.1016/j.jmatprotec.2004.11.015 · DOI
  154. Sahin, 2009, Joining of Stainless-steel and Aluminium Materials by Friction Welding, The International Journal of Advanced Manufacturing Technology, 41, 487, 10.1007/s00170-008-1492-7 · DOI
  155. Sahin, 2014, Characterization of Properties in Friction-Welded Austenitic-Stainless Steel and Aluminium Joints, Industrial Lubrication and Tribology, 66, 260, 10.1108/ILT-11-2011-0100 · DOI
  156. Sakundarini, 2013, Optimal Multi-material Selection for Lightweight Design of Automotive Body Assembly Incorporating Recyclability, Materials & Design, 50, 846, 10.1016/j.matdes.2013.03.085 · DOI
  157. Salonitis, 2013, CO2 Laser Butt-welding of Steel Sandwich Sheet Composites, The International Journal of Advanced Manufacturing Technology, 69, 245, 10.1007/s00170-013-5025-7 · DOI
  158. Sechi, 2010, Dissimilar Laser Brazing of Boron Nitride and Tungsten Carbide, Materials & Design, 31, 2071, 10.1016/j.matdes.2009.10.009 · DOI
  159. Seli, 2010, Mechanical Evaluation and Thermal Modelling of Friction Welding of Mild Steel and Aluminium, Journal of Materials Processing Technology, 210, 1209, 10.1016/j.jmatprotec.2010.03.007 · DOI
  160. Shercliff, 2001, Selection of Manufacturing Processes in Design and the Role of Process Modelling, Progress in Materials Science, 46, 429, 10.1016/S0079-6425(00)00013-X · DOI
  161. Shim, 2001, Using Phase Change Materials in Clothing, Textile Research Journal, 71, 495, 10.1177/004051750107100605 · DOI
  162. Shin, 2009, Similar and Dissimilar Friction Welding of Zr–Cu–Al Bulk Glassy Alloys, Journal of Alloys and Compounds, 483, 182, 10.1016/j.jallcom.2008.07.231 · DOI
  163. Sirisalee, 2006, Multi-Criteria Material Selection of Monolithic and Multi-Materials in Engineering Design, Advanced Engineering Materials, 8, 48, 10.1002/adem.200500196 · DOI
  164. Small, 2005, Fundamentals of Industrial Adhesives, Advanced Materials & Processes, 163, 44
  165. Song, 2013, Heating Mechanism of Spark Plasma Sintering, Ceramics International, 39, 1393, 10.1016/j.ceramint.2012.07.080 · DOI
  166. Song, 2013, Interfacial Microstructure and Mechanical Property of Ti6Al4V/A6061 Dissimilar Joint by Direct Laser Brazing Without Filler Metal and Groove, Materials Science and Engineering, A, 560, 111, 10.1016/j.msea.2012.09.044 · DOI
  167. Springer, 2011, Influence of Intermetallic Phases and Kirkendall-porosity on the Mechanical Properties of Joints between Steel and Aluminium Alloys, Materials Science and Engineering, A, 528, 4630, 10.1016/j.msea.2011.02.057 · DOI
  168. Srivastava, 2003, Characterization of Adhesive Bonded Lap Joints of C/C–SiC Composite and Ti–6Al–4V Alloy Under Varying Conditions, International Journal of Adhesion and Adhesives, 23, 59, 10.1016/S0143-7496(02)00082-9 · DOI
  169. Sun, 2004, Resistance Spot Welding of Aluminum Alloy to Steel with Transition Material—Part II: Finite Element Analyses of Nugget Growth, Welding Journal (Miami, FL), 83, 197S
  170. Sun, 2004, Resistance Spot Welding of Aluminum Alloy to Steel with Transition Material—From Process to Performance—Part I: Experimental Study, Welding Journal (Miami, FL), 83, 188-S
  171. Sun, 1995, Laser Welding of Dissimilar Metal Combinations, Journal of Materials Science, 30, 4205, 10.1007/BF00361499 · DOI
  172. Szlosarek, 2013, Mechanical Testing of Flow Drill Screw Joints between Fibre-Reinforced Plastics and Metals, Materialpruefung, 55, 737
  173. Söderberg, 2008, Improving Decision Making by Simulating and Visualizing Geometrical Variation in Non-Rigid Assemblies, CIRP Annals—Manufacturing Technology, 57, 175, 10.1016/j.cirp.2008.03.040 · DOI
  174. Söderberg, 2012, The Influence of Spot Weld Position Variation on Geometrical Quality, CIRP Annals—Manufacturing Technology, 61, 13, 10.1016/j.cirp.2012.03.127 · DOI
  175. Taban, 2010, Dissimilar Friction Welding of 6061-T6 Aluminum and AISI 1018 Steel: Properties and Microstructural Characterization, Materials & Design, 31, 2305, 10.1016/j.matdes.2009.12.010 · DOI · Paper page
  176. Tanwar, 2014, Friction Stir Welding: Review, International Journal of Enhanced Research in Science Technology & Engineering, 3, 172
  177. Teker, 2013, Evaluation of the Metallurgical and Mechanical Properties of Friction-Welded Joints of Dissimilar Metal Combinations AISI2205/Cu, International Journal of Advanced Manufacturing Technology, 66, 303, 10.1007/s00170-012-4325-7 · DOI
  178. Tomashchuk, 2015, Direct Keyhole Laser Welding of Aluminum Alloy AA5754 to Titanium Alloy Ti6Al4V, Journal of Materials Processing Technology, 217, 96, 10.1016/j.jmatprotec.2014.10.025 · DOI
  179. Tomashchuk, 2011, Multiphysical Modeling of Dissimilar Welding via Interlayer, Journal of Materials Processing Technology, 211, 1796, 10.1016/j.jmatprotec.2011.06.004 · DOI
  180. Tomashchuk, 2013, The Modeling of Dissimilar Welding of Immiscible Materials by Using a Phase Field Method, Applied Mathematics and Computation, 219, 7103, 10.1016/j.amc.2012.01.039 · DOI
  181. Trimble, 2012, Force Generation during Friction Stir Welding of AA2024-T3, CIRP Annals—Manufacturing Technology, 61, 9, 10.1016/j.cirp.2012.03.024 · DOI
  182. Tu, 2011, Resistance Spot Welding Between Titanium and Stainless Steel with an Aluminum Alloy Insert, Advanced Materials Research, 291–294, 964, 10.4028/www.scientific.net/AMR.291-294.964 · DOI
  183. Uday, 2010, Advances in Friction Welding Process: A Review, Science and Technology of Welding and Joining, 15, 534, 10.1179/136217110X12785889550064 · DOI
  184. Uday, 2011, Evaluation of Interfacial Bonding in Dissimilar Materials of YSZ–Alumina Composites to 6061 Aluminium Alloy Using Friction Welding, Materials Science and Engineering, A, 528, 1348, 10.1016/j.msea.2010.10.060 · DOI
  185. Ueda, 2011, Effects of Zn-Based Alloys Coating on Mechanical Properties and Interfacial Microstructures of Steel/Aluminum Alloy Dissimilar Metals Joints Using Resistance Spot Welding, Materials Transactions, 52, 967, 10.2320/matertrans.L-MZ201108 · DOI
  186. Uzun, 2005, Friction Stir Welding of Dissimilar Al 6013-T4 to X5CrNi18-10 Stainless Steel, Materials & Design, 26, 41, 10.1016/j.matdes.2004.04.002 · DOI
  187. Varis, 2006, Ensuring the Integrity in Clinching Process, Journal of Materials Processing Technology, 174, 277, 10.1016/j.jmatprotec.2006.02.001 · DOI
  188. Varis, 2003, The Suitability of Clinching as a Joining Method for High-strength Structural Steel, Journal of Materials Processing Technology, 132, 242, 10.1016/S0924-0136(02)00933-0 · DOI
  189. Venables, 1984, Adhesion and Durability of Metal–Polymer Bonds, Journal of Materials Science, 19, 2431, 10.1007/BF00550796 · DOI
  190. Verbrugge, 2009, Mass Decompounding and Vehicle Lightweighting, Materials Science Forum, 618–619, 411, 10.4028/www.scientific.net/MSF.618-619.411 · DOI
  191. Wagener, 1994, Pressure Welding of Corrosion Resistant Metals by Cold Extrusion, Journal of materials processing technology, 45, 275, 10.1016/0924-0136(94)90352-2 · DOI
  192. Wagner, 2013, Ultrasonic Welding of Aluminum Alloys to Fiber Reinforced Polymers, Advanced Engineering Materials, 15, 792, 10.1002/adem.201300043 · DOI
  193. Wang, 2003, Modelling and Analysis of Metal Transfer in Gas Metal Arc Welding, Journal of Physics D: Applied Physics, 36, 1143, 10.1088/0022-3727/36/9/313 · DOI
  194. Wang, 2011, Interface Microstructure and Weld Strength of Steel/Aluminum Alloy Joints by Resistance Spot Welding, Applied Mechanics and Materials, 117–119, 1895, 10.4028/www.scientific.net/AMM.117-119.1895 · DOI
  195. Wang, 2013, Analyses of Nugget and Expulsion Formation Process during Resistance Spot Welding between Aluminum Alloy and Steel, Advanced Materials Research, 859, 7, 10.4028/www.scientific.net/AMR.859.7 · DOI
  196. Wang, 2014, Analyses of Strategies and Problems in Resistance Spot Welding of Dissimilar Materials, Applied Mechanics and Materials, 490, 315
  197. Wang, 2014, Investigation of the Relationships of Process Parameters, Molten Pool Geometry and Shear Strength in Laser Transmission Welding of Polyethylene Terephthalate and Polypropylene, Materials & Design, 55, 343, 10.1016/j.matdes.2013.09.052 · DOI
  198. Wang, 2010, Laser Transmission Joint between Pet and Titanium for Biomedical Application, Journal of Materials Processing Technology, 210, 1767, 10.1016/j.jmatprotec.2010.06.007 · DOI
  199. Wang, 2012, Modeling and Optimization of Laser Transmission Joining Process between PET and 316L Stainless Steel Using Response Surface Methodology, Optics & Laser Technology, 44, 656, 10.1016/j.optlastec.2011.09.018 · DOI
  200. Wang, 2013, Interfacial Characterization of T3 Copper/35CrMnSi Steel Dissimilar Metal Joints by Inertia Radial Friction Welding, The International Journal of Advanced Manufacturing Technology, 68, 1479, 10.1007/s00170-013-4936-7 · DOI

200 of 223 shown

Metadata

Authors
Martinsen, K., Hu, S. J., & Carlson, B. E.
Affiliations
  • SINTEF Manufacturing (NO)
  • University of Michigan (US)
  • General Motors (United States) (US)
Corresponding author
Martinsen, K.
ORCID
Venue
CIRP Annals
Publisher
Elsevier BV
Published
2015
Volume
64
Issue
2
Pages
679-699
ISSN
0007-8506 (ISSN-L)
DOI
10.1016/j.cirp.2015.05.006
OpenAlex
W3104490855
Cited by
632
References
1
Citations by year
2026: 56 · 2025: 61 · 2024: 57 · 2023: 74 · 2022: 73 · 2021: 82 · 2020: 64 · 2019: 63 · 2018: 50 · 2017: 31 · 2016: 17 · 2015: 2
FWCI
33.44
Type
journal article
Language
en
Open access
Licence
  • cc-by-nc-nd
  • www.elsevier.com/tdm/userlicense/1.0/ (tdm)
Locations
  • CIRP Annals (publishedVersion)
  • BIBSYS Brage (BIBSYS (Norway)) (submittedVersion, cc-by-nc-nd)
  • NORA - Norwegian Open Research Archives (submittedVersion, cc-by-nc-nd)
Funders
  • Areva
  • University of Patras
Topics
  • Physical Sciences › Engineering › Mechanical Engineering › Advanced Welding Techniques Analysis
  • Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
  • Physical Sciences › Engineering › Mechanics of Materials › Mechanical Behavior of Composites
Keywords
dissimilar material joining, hybrid structures, multi-material structures, mechanical joining, thermal joining, process selection, joint formation mechanism, lightweight manufacturing

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Joining of dissimilar materials. https://app.cochat.ai/papers/10.1016/j.cirp.2015.05.006
The paper
Martinsen, K., Hu, S. J., & Carlson, B. E. (2015). Joining of dissimilar materials. CIRP Annals. https://doi.org/10.1016/j.cirp.2015.05.006

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.