The DOI matches its Crossref record; 6 of the 13 references it cites were found in a registry or an index.
Effect of O2 content in argon-based shielding gas on arc wandering in WAAM of aluminum thin walls
Abstract
The present work aimed at evaluating the effect of O2 content in argon-based shielding gases over the arc cathodic emission behavior (which can lead to arc wandering) in wire + arc additive manufacturing (WAAM) of thin aluminum walls and its consequences over layer formation. The effect of O2 content on arc wandering was assessed by analyzing cathodic spot behavior through high-speed videography during Gas metal arc (GMA-AM) depositions. Superficial and geometric aspects were analyzed, as well as the sputtering zone width on the wall sides. Through a proposed model, a parallel effect of wire-introduced oxides was weighted to explain arc wandering, searching for oxides in the wall sides (deviating from its action only on the pool). The main finding was that no influence of O2 from the shielding gas was observed on arc wandering, consequently on layer formation, when its content was up to 200 ppm. When an O2 content of 20,000 ppm was employed, oxide searching by the arc in the wall sides was no longer perceived due to enough oxide availability from the shielding gas. However, this favorable condition to layer formation entailed excessive layer oxidation. From the cathodic emission point of view, it can be said that high-purity shielding gases or special mixtures with small additions of O2 (up to 200 ppm) provide no significant advantages for WAAM of aluminum thin walls, at least for the hereby tested alloy and parameters.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“However, WAAM relies on the presence of gases (typically shielding gases) to create the electric arc [305,306], which seems impossible in a vacuum environment.”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [305]
Citations
Cites
Wire + Arc Additive Manufacturing
Williams, S., Martina, F., Addison, A. C., Ding, J., Pardal, G., & Colegrove, P. A. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000073 · Cited by 1,971
Lancaster, J. F. (1984) · Physics in Technology · doi:10.1088/0305-4624/15/2/i05 · Cited by 610
Characterization of Spatter in Low-Current GMAW of Titanium Alloy Plate
Eickhoff, S. T. (1990) · Cited by 23
Tong, H., Ueyama, T., Tanaka, M., & Ushio, M. (2005) · Science and Technology of Welding & Joining · doi:10.1179/174329305x48338 · Cited by 17
The influence of parameter settings on cathodic self-etching during aluminum welding
Scotti, A., Dutra, J. C., & Ferraresi, V. A. (2000) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00436-2 · Cited by 16
Self-citationImproved arc stability in aluminium welding by oxygen doping of inert shielding gas
Matz, C., & Wilhelm, G. (2011) · Welding International · doi:10.1080/09507116.2011.581341 · Cited by 9
Research works printed but not linked: 4
- ASTM, 2016, ASTM F3187 - 16 - standard guide for directed energy deposition of metals, ASTM Int., 1
- Modenesi, 1994, Arc instability phenomena in GMA welding, Weld. J. (Miami, Fla), 73, 2195
- Sarrafi, 2010, Cathodic cleaning of oxides from aluminum surface by variable-polarity arc, Weld. J. (Miami, Fla), 89
- Yarmuch, 2007, Variable AC polarity GTAW fusion behavior in 5083 aluminum, Weld. J. (Miami, Fla), 86
Cited by
Tomar, B., Shiva, S., & Nath, T. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.103739 · Cited by 345
The Current State of Research of Wire Arc Additive Manufacturing (WAAM): A Review
Treutler, K., & Wesling, V. (2021) · Applied Sciences · doi:10.3390/app11188619 · Cited by 293
Review of Aluminum Alloy Development for Wire Arc Additive Manufacturing
Langelandsvik, G., Akselsen, O. M., Furu, T., & Roven, H. J. (2021) · Materials · doi:10.3390/ma14185370 · Cited by 183
Mansor, M. S. M., Raja, S., Yusof, F. B., Muhamad, M. R., Manurung, Y. H., Adenan, M. S., Hussein, N. I. S., & Ren, J. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.03.170 · Cited by 119
Research progress in arc based additive manufacturing of aluminium alloys – A review
Sinha, A. K., Pramanik, S., & Yagati, K. P. (2022) · Measurement · doi:10.1016/j.measurement.2022.111672 · Cited by 107
Metadata
- Authors
- da Silva, L. J., Scotti, F. M., Fernandes, D. B., Reis, R. P., & Scotti, A.
- Affiliations
- Universidade Federal de Uberlândia (BR)
- University West (SE)
- Venue
- CIRP journal of manufacturing science and technology
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 32
- Pages
- 338-345
- ISSN
- 1755-5817 (ISSN-L)
- OpenAlex
- W3128623212
- Cited by
- 36
- References
- 13
- Citations by year
- 2026: 6 · 2025: 11 · 2024: 6 · 2023: 6 · 2022: 3 · 2021: 4
- FWCI
- 2.03
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Locations
- CIRP journal of manufacturing science and technology (publishedVersion)
- Funders
- Conselho Nacional de Desenvolvimento Científico e Tecnológico
- Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Mechanical Engineering › Welding Techniques and Residual Stresses
- Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Vacuum and Plasma Arcs
- Keywords
- wire arc additive manufacturing, oxygen concentration, layer formation, high-speed video
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of O2 content in argon-based shielding gas on arc wandering in WAAM of aluminum thin walls. https://app.cochat.ai/papers/10.1016/j.cirpj.2021.01.018
- The paper
- da Silva, L. J., Scotti, F. M., Fernandes, D. B., Reis, R. P., & Scotti, A. (2021). Effect of O2 content in argon-based shielding gas on arc wandering in WAAM of aluminum thin walls. CIRP journal of manufacturing science and technology. https://doi.org/10.1016/j.cirpj.2021.01.018
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.