The DOI matches its Crossref record; 76 of the 76 references it cites were found in a registry or an index.
A review of the fundamentals of polymer-modified asphalts: Asphalt/polymer interactions and principles of compatibility
Open accessAbstract
During the last decades, the number of vehicles per citizen as well as the traffic speed and load has dramatically increased. This sudden and somehow unplanned overloading has strongly shortened the life of pavements and increased its cost of maintenance and risks to users. In order to limit the deterioration of road networks, it is necessary to improve the quality and performance of pavements, which was achieved through the addition of a polymer to the bituminous binder. Since their introduction, polymer-modified asphalts have gained in importance during the second half of the twentieth century, and they now play a fundamental role in the field of road paving. With high-temperature and high-shear mixing with asphalt, the polymer incorporates asphalt molecules, thereby forming a swallowed network that involves the entire binder and results in a significant improvement of the viscoelastic properties in comparison with those of the unmodified binder. Such a process encounters the well-known difficulties related to the poor solubility of polymers, which limits the number of macromolecules able to not only form such a structure but also maintain it during high-temperature storage in static conditions, which may be necessary before laying the binder. Therefore, polymer-modified asphalts have been the subject of numerous studies aimed to understand and optimize their structure and storage stability, which gradually attracted polymer scientists into this field that was initially explored by civil engineers. The analytical techniques of polymer science have been applied to polymer-modified asphalts, which resulted in a good understanding of their internal structure. Nevertheless, the complexity and variability of asphalt composition rendered it nearly impossible to generalize the results and univocally predict the properties of a given polymer/asphalt pair. The aim of this paper is to review these aspects of polymer-modified asphalts. Together with a brief description of the specification and techniques proposed to quantify the storage stability, state-of-the-art knowledge about the internal structure and morphology of polymer-modified asphalts is presented. Moreover, the chemical, physical, and processing solutions suggested in the scientific and patent literature to improve storage stability are extensively discussed, with particular attention to an emerging class of asphalt binders in which the technologies of polymer-modified asphalts and polymer nanocomposites are combined. These polymer-modified asphalt nanocomposites have been introduced less than ten years ago and still do not meet the requirements of industrial practice, but they may constitute a solution for both the performance and storage requirements.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer nanotechnology: Nanocomposites
Paul, D. R., & Robeson, L. M. (2008) · Polymer · doi:10.1016/j.polymer.2008.04.017 · Cited by 3,317
The solubility of nonelectrolytes
Myerson, A. L. (1951) · Journal of the Franklin Institute · doi:10.1016/0016-0032(51)90518-2 · Cited by 2,333
Lesueur, D. (2009) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2008.08.011 · Cited by 1,693
An assessment of high voltage electron microscopy (HVEM). An invited review
Loretto, M. H., & Smallman, R. E. (1977) · Materials Science and Engineering · doi:10.1016/0025-5416(77)90085-4 · Cited by 1,655
Solubility of Non-Electrolytes
(1936) · Nature · doi:10.1038/138742a0 · Cited by 1,421
Olabisi, O., Robeson, L. M., & Shaw, M. T. (1979) · doi:10.13140/2.1.2644.3206 · Cited by 1,383
Funke, W. (1980) · Progress in Organic Coatings · doi:10.1016/0300-9440(80)80020-8 · Cited by 926
Asphaltic Bitumen as Colloid System.
Pfeiffer, J. P., & Saal, R. N. J. (1940) · The Journal of Physical Chemistry · doi:10.1021/j150398a001 · Cited by 676
Developments in Block Copolymer Science and Technology
(2004) · Wiley eBooks · doi:10.1002/0470093943 · Cited by 494
Wu, S.-P., Pang, L., Mo, L.-T., Chen, Y.-C., & Zhu, G.-J. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.05.004 · Cited by 476
Associating polymers: Equilibrium and linear viscoelasticity
Semenov, A. N., Joanny, J., & Khokhlov, A. R. (1995) · Macromolecules · doi:10.1021/ma00108a038 · Cited by 464
Use of waste high density polyethylene as bitumen modifier in asphalt concrete mix
Hınıslıoğlu, S. (2003) · Materials Letters · doi:10.1016/s0167-577x(03)00458-0 · Cited by 440
Rheological evaluation of ethylene vinyl acetate polymer modified bitumens
Airey, G. D. (2002) · Construction and Building Materials · doi:10.1016/s0950-0618(02)00103-4 · Cited by 439
Nanoclay-modified asphalt materials: Preparation and characterization
You, Z., Mills-Beale, J., Foley, J. M., Roy, S., Odegard, G. M., Dai, Q., & Goh, S. W. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.06.070 · Cited by 439
Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts
Polacco, G., Stastna, J., Biondi, D., & Zanzotto, L. (2006) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2006.09.001 · Cited by 421
Self-citationEffects of nanoclay on rheological properties of bitumen binder
Jahromi, S. G., & Khodaii, A. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2009.02.027 · Cited by 384
Bitumen morphologies by phase‐detection atomic force microscopy
MASSON, J., LEBLOND, V., & MARGESON, J. (2006) · Journal of Microscopy · doi:10.1111/j.1365-2818.2006.01540.x · Cited by 357
Asphalt modification with different polyethylene-based polymers
Polacco, G., Berlincioni, S., Biondi, D., Stastna, J., & Zanzotto, L. (2005) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.05.034 · Cited by 347
Self-citationCompatibilizing Bulk Polymer Blends by Using Organoclays
Si, M., Araki, T., Ade, H., Kilcoyne, A. L. D., Fisher, R., Sokolov, J. C., & Rafailovich, M. H. (2006) · Macromolecules · doi:10.1021/ma060125+ · Cited by 332
Nanomaterials Applied in Asphalt Modification: A Review
Fang, C., Yu, R., Liu, S., & Li, Y. (2013) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2013.04.008 · Cited by 296
Preparation and properties of montmorillonite modified asphalts
Yu, J., Zeng, X., Wu, S., Wang, L., & Liu, G. (2006) · Materials Science and Engineering A · doi:10.1016/j.msea.2006.10.037 · Cited by 233
Storage stability and compatibility of asphalt binder modified by SBS graft copolymer
Fu, H., Xie, L., Dou, D., Li, L., Yu, M., & Yao, S. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.03.008 · Cited by 227
Effect of waste polymer addition on the rheology of modified bitumen
García‐Morales, M., Partal, P., Navarro, F. J., & Gallegos, C. (2005) · Fuel · doi:10.1016/j.fuel.2005.09.015 · Cited by 226
The Use of Polyethylene in Hot Asphalt Mixtures
Awwad, M. T., & Shbeeb, L. I. (2007) · American Journal of Applied Sciences · doi:10.3844/ajassp.2007.390.396 · Cited by 199
Rheology of asphalts modified with glycidylmethacrylate functionalized polymers
Polacco, G., Stastna, J., Biondi, D., Antonelli, F., Vlachovicova, Z., & Zanzotto, L. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.08.043 · Cited by 191
Self-citationRapid FTIR method for quantification of styrene-butadiene type copolymers in bitumen
Masson, J.-F., Pelletier, L., & Collins, P. (2000) · Journal of Applied Polymer Science · Cited by 188
Bitumen microstructure by modulated differential scanning calorimetry
Masson, J.-F., & Polomark, G. M. (2001) · Thermochimica Acta · doi:10.1016/s0040-6031(01)00478-6 · Cited by 183
Use of rheological compatibility criteria to study SBS modified asphalts
M, Y. B., Müller, A. J., & Rodriguez, Y. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12764 · Cited by 176
Solvent-regulated ordering in block copolymers
Alexandridis, P., & Spontak, R. J. (1999) · Current Opinion in Colloid & Interface Science · doi:10.1016/s1359-0294(99)00022-9 · Cited by 172
Oilfield solids and water-in-oil emulsion stability
Sztukowski, D. M., & Yarranton, H. W. (2005) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.12.029 · Cited by 168
Behavior of Asphalt Concrete Mixtures with Reclaimed Polyethylene as Additive
Punith, V. S., & Veeraragavan, A. (2007) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2007)19:6(500 · Cited by 168
Bitumen–Clay Interactions in Aqueous Media Studied by Zeta Potential Distribution Measurement
Liu, J., Zhou, Z., Xu, Z., & Masliyah, J. H. (2002) · Journal of Colloid and Interface Science · doi:10.1006/jcis.2002.8471 · Cited by 167
Brief Review of the Chemistry of Polyphosphoric Acid (PPA) and Bitumen
Masson, J.-F. (2008) · Energy & Fuels · doi:10.1021/ef800120x · Cited by 165
Masson, J.-F., Polomark, G. M., & Collins, P. (2002) · Energy & Fuels · doi:10.1021/ef010233r · Cited by 163
Developments in block copolymer science and technology
(2004) · Materials Today · doi:10.1016/s1369-7021(04)00291-3 · Cited by 160
Processing and properties of polymeric nano‐composites
Wang, H., Zeng, C., Elkovitch, M. D., Lee, L. J., & Koelling, K. W. (2001) · Polymer Engineering and Science · doi:10.1002/pen.10899 · Cited by 157
Rheological properties of asphalt/SBS/clay blends
Polacco, G., Kříž, P., Filippi, S., Stastna, J., Biondi, D., & Zanzotto, L. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.08.032 · Cited by 155
Self-citationCompatibilizing Poly(vinylidene fluoride)/Nylon-6 Blends with Nanoclay
Vo, L. T., & Giannelis, E. P. (2007) · Macromolecules · doi:10.1021/ma071508q · Cited by 154
Evaluation of thermal and mechanical properties of recycled polyethylene modified bitumen
Fuentes‐Audén, C., Herrera, J. A. S., Jerez, A., Navarro, F. J., Martínez-Boza, F. J., Partal, P., & Gallegos, C. (2008) · Polymer Testing · doi:10.1016/j.polymertesting.2008.09.006 · Cited by 154
Physical Structure of Asphaltenes
Sirota, E. B. (2005) · Energy & Fuels · doi:10.1021/ef049795b · Cited by 147
Thermodynamics, Phase Diagrams, and Stability of Bitumen−Polymer Blends
Masson, J.-F., Collins, P., Robertson, G. P., et al. (2003) · Energy & Fuels · doi:10.1021/ef0202687 · Cited by 145
Polymer blends for enhanced asphalt binders
Ait‐Kadi, A., Brahimi, B., & Bousmina, M. (1996) · Polymer Engineering and Science · doi:10.1002/pen.10568 · Cited by 140
Aging of asphaltic binders investigated with atomic force microscopy
Rebelo, L. M., de Sousa, J. S., Abreu, A. S., Baroni, M. P. M. A., de Alencar, A. E. V., Soares, S. D. A., Filho, J. M., & Soares, J. B. (2013) · Fuel · doi:10.1016/j.fuel.2013.09.018 · Cited by 137
Zhang, H., Yu, J., Wang, H., & Xue, L. (2011) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2011.04.078 · Cited by 134
Production of stable polypropylene-modified bitumens
Giavarini, C., Filippis, P. D., Santarelli, M. L., & Scarsella, M. (1996) · Fuel · doi:10.1016/0016-2361(95)00312-6 · Cited by 133
Masson, J.-F., LEBLOND, V., Margeson, J., & Bundalo-Perc, S. (2007) · Journal of Microscopy · doi:10.1111/j.1365-2818.2007.01796.x · Cited by 127
Effect of composition on the properties of SEBS modified asphalts
Polacco, G., Muscente, A., Biondi, D., & Santini, S. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2005.11.024 · Cited by 119
Self-citationInternal structure and linear viscoelastic properties of EVA/asphalt nanocomposites
Markanday, S. S., Filippi, S., Polacco, G., Kazatchkov, I. B., Stastna, J., & Zanzotto, L. (2010) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.12.024 · Cited by 118
Self-citationInfluence of Layered Silicates on the Phase-Separated Morphology of PS−PVME Blends
Yurekli, K., Karim, A., Amis, E. J., & Krishnamoorti, R. (2003) · Macromolecules · doi:10.1021/ma020755l · Cited by 117
The research of GMA-g-LDPE modified Qinhuangdao bitumen
Jun, L., Yuxia, Z., & Yuzhen, Z. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2007.03.007 · Cited by 117
Polyphosphoric acid modified asphalt: proposed mechanisms
Baumgardner, G. L., Masson, J., Hardee, J. R., Menapace, A. M., & Williams, A. G. (2005) · NPARC · Cited by 112
Glass Transition and Phase Stability in Asphalt Binders
Kriz, P., Stastna, J., & Zanzotto, L. (2008) · Road Materials and Pavement Design · doi:10.1080/14680629.2008.9690158 · Cited by 112
Combined modification of asphalt with polyethylene packaging waste and organophilic montmorillonite
Fang, C., Yu, R., Zhang, Y., Hu, J., Zhang, M., & Mi, X. (2011) · Polymer Testing · doi:10.1016/j.polymertesting.2011.11.008 · Cited by 110
González, I., Eguiazábal, J. I., & Nazábal, J. (2006) · European Polymer Journal · doi:10.1016/j.eurpolymj.2006.07.014 · Cited by 107
Polyamide 6-clay nanocomposites/polypropylene-grafted-maleic anhydride alloys
Liu, X. (2001) · Polymer · doi:10.1016/s0032-3861(01)00307-x · Cited by 105
González, O., Peña, J. J., Muñoz, M. E., Santamaría, A., Pérez‐Lepe, A., Martínez-Boza, F. J., & Gallegos, C. (2002) · Energy & Fuels · doi:10.1021/ef020049l · Cited by 100
Vulcanization characteristics of asphalt/SBS blends in the presence of sulfur
Wen, G., Zhang, Y., Zhang, Y., Sun, K., & Chen, Z. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1932 · Cited by 88
Polyphosphoric Acid Modification of Asphalt
Fee, D. C., Maldonado, R., Reinke, G. H., & Romagosa, H. (2010) · Transportation Research Record Journal of the Transportation Research Board · doi:10.3141/2179-06 · Cited by 81
Ovejero, G., Pérez, P., Romero, M. D., Guzmán, I., & ́ez, E. D. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.01.007 · Cited by 74
Effect of used-tire-derived pyrolytic oil residue on the properties of polymer-modified asphalts
Yousefi, A. A. (2000) · Fuel · doi:10.1016/s0016-2361(99)00216-1 · Cited by 73
Fang, C., Yu, R., Li, Y., Zhang, M., Hu, J., & Zhang, M. (2013) · Polymer Testing · doi:10.1016/j.polymertesting.2013.04.006 · Cited by 71
Behavior of Reclaimed Polyethylene Modified Asphalt Cement for Paving Purposes
Punith, V. S., & Veeraragavan, A. (2010) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)mt.1943-5533.0000235 · Cited by 70
Reaction of asphalt and maleic anhydride: Kinetics and mechanism
Kang, Y., Wang, F., & Chen, Z. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2010.08.020 · Cited by 64
Polyethlene‐modified bitumen for paving applications
Jew, P., Shimizu, J. A., Svazic, M., & Woodhams, R. T. (1986) · Journal of Applied Polymer Science · doi:10.1002/app.1986.070310824 · Cited by 64
Dynamics of Bitumen Fractions by Thin-Layer Chromatography/Flame Ionization Detection
Masson, J.-F., Price, T., & Collins, P. (2001) · Energy & Fuels · doi:10.1021/ef0100247 · Cited by 62
Fundamental Characterization of Asphalt Clay Nanocomposites
Nazzal, M. D., Kaya, S., Günay, T., & Ahmedzade, P. (2012) · Journal of Nanomechanics and Micromechanics · doi:10.1061/(asce)nm.2153-5477.0000050 · Cited by 60
Fang, C., Wu, C., Yu, R., Zhang, Z., Zhang, M., & Zhou, S. (2012) · Polymers for Advanced Technologies · doi:10.1002/pat.3048 · Cited by 52
Bituminous polyurethane network: Preparation, properties, and end use
Singh, B., Gupta, M., & Kumar, L. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23198 · Cited by 48
Filippi, S., Dintcheva, N. T., Scaffaro, R., Mantia, F. P. L., Polacco, G., & Magagnini, P. (2009) · Polymer Engineering and Science · doi:10.1002/pen.21361 · Cited by 44
Self-citationRheological properties and stability of ethylene vinyl acetate polymer‐modified bitumen
Bulatović, V. O., Rek, V., & Marković, K. J. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23462 · Cited by 40
Mastic of polymer‐modified bitumen and poly(vinyl chloride) wastes
Singh, B., Gupta, M., & Tarannum, H. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12795 · Cited by 27
Merusi, F., Giuliani, F., Filippi, S., & Polacco, G. (2013) · Materials and Structures · doi:10.1617/s11527-013-0096-3 · Cited by 24
Self-citationParallel Breakup of Polymer Drops under Simple Shear
Lin, B., Mighri, F., Huneault, M. A., & Sundararaj, U. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200350026 · Cited by 22
Cuadri, A. A., García‐Morales, M., Navarro, F. J., Airey, G. D., & Partal, P. (2013) · Rheologica Acta · doi:10.1007/s00397-012-0671-5 · Cited by 13
Cited by
Environmentally friendly polymer-rubber composites obtained from waste tyres: A review
Sienkiewicz, M., Janik, H., Borzędowska-Labuda, K., & Kucińska-Lipka, J. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.121 · Cited by 320
The use of polyurethane for asphalt pavement engineering applications: A state-of-the-art review
Cong, L., Yang, F., Guo, G., Ren, M., Shi, J., & Tan, L. (2019) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2019.07.213 · Cited by 268
Metadata
- Authors
- Polacco, G., Filippi, S., Merusi, F., & Stastna, G.
- Venue
- Advances in Colloid and Interface Science
- Publisher
- Elsevier BV
- Published
- 2015-10
- Volume
- 224
- Pages
- 72-112
- ISSN
- 0001-8686 (ISSN-L)
- OpenAlex
- W2128284613
- Cited by
- 711
- References
- 76
- FWCI
- 40.72
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.