The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
A new bearing fault diagnosis method based on modified convolutional neural networks
Open accessAbstract
Fault diagnosis is vital in manufacturing system. However, the first step of the traditional fault diagnosis method is to process the signal, extract the features and then put the features into a selected classifier for classification. The process of feature extraction depends on the experimenters’ experience, and the classification rate of the shallow diagnostic model does not achieve satisfactory results. In view of these problems, this paper proposes a method of converting raw signals into two-dimensional images. This method can extract the features of the converted two-dimensional images and eliminate the impact of expert’s experience on the feature extraction process. And it follows by proposing an intelligent diagnosis algorithm based on Convolution Neural Network (CNN), which can automatically accomplish the process of the feature extraction and fault diagnosis. The effect of this method is verified by bearing data. The influence of different sample sizes and different load conditions on the diagnostic capability of this method is analyzed. The results show that the proposed method is effective and can meet the timeliness requirements of fault diagnosis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
A new convolutional neural network-based data-driven fault diagnosis method
Wen, L., Li, X., Gao, L., & Zhang, Y. (2018) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2017.2774777 · Cited by 2,222
Ma, X., Dai, Z., He, Z., Ma, J., Wang, Y., & Wang, Y. (2017) · Sensors · doi:10.3390/s17040818 · Cited by 1,409
Abdeljaber, O., Avci, O., Kiranyaz, S., Gabbouj, M., & Inman, D. J. (2017) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2016.10.043 · Cited by 1,278
Guo, L., Lei, Y., Xing, S., Yan, T., & Li, N. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877090 · Cited by 1,234
Self-citationA recurrent neural network based health indicator for remaining useful life prediction of bearings
Guo, L., Li, N., Jia, F., Lei, Y., & Lin, J. (2017) · Neurocomputing · doi:10.1016/j.neucom.2017.02.045 · Cited by 1,231
Self-citationLei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
SVMs Modeling for Highly Imbalanced Classification
Tang, Y., Zhang, Y.-Q., Chawla, N. V., & Krasser, S. (2009) · IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics) · doi:10.1109/tsmcb.2008.2002909 · Cited by 966
Condition monitoring and fault diagnosis of planetary gearboxes: A review
Lei, Y., Lin, J., Zuo, M. J., & He, Z. (2014) · Measurement · doi:10.1016/j.measurement.2013.11.012 · Cited by 731
Bearing fault diagnosis based on wavelet transform and fuzzy inference
Lou, X., & Loparo, K. A. (2004) · Mechanical Systems and Signal Processing · doi:10.1016/s0888-3270(03)00077-3 · Cited by 689
Cited by
A review of the application of deep learning in intelligent fault diagnosis of rotating machinery
Zhu, Z., Lei, Y., Qi, G., Chai, Y., Mazur, N., An, Y., & Huang, X. (2023) · Measurement · doi:10.1016/j.measurement.2022.112346 · Cited by 731
Zhao, Z., Li, T., Wu, J., Sun, C., Wang, S., Yan, R., & Chen, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.08.010 · Cited by 688
Hakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Liu, D., Cui, L., & Cheng, W. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/acf390 · Cited by 256
Metadata
- Authors
- ZHANG, J., SUN, Y., GUO, L., GAO, H., HONG, X., & SONG, H.
- Venue
- Chinese Journal of Aeronautics
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 33
- Issue
- 2
- Pages
- 439-447
- ISSN
- 1000-9361 (ISSN-L)
- OpenAlex
- W2966008650
- Cited by
- 326
- References
- 34
- FWCI
- 14.71
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new bearing fault diagnosis method based on modified convolutional neural networks. https://app.cochat.ai/papers/10.1016/j.cja.2019.07.011
- The paper
- ZHANG, J., SUN, Y., GUO, L., GAO, H., HONG, X., & SONG, H. (2020). A new bearing fault diagnosis method based on modified convolutional neural networks. Chinese Journal of Aeronautics. https://doi.org/10.1016/j.cja.2019.07.011
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.