The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Rotating machinery fault diagnosis based on convolutional neural network and infrared thermal imaging
Open accessAbstract
Rotating machinery is widely applied in industrial applications. Fault diagnosis of rotating machinery is vital in manufacturing system, which can prevent catastrophic failure and reduce financial losses. Recently, Deep Learning (DL)-based fault diagnosis method becomes a hot topic. Convolutional Neural Network (CNN) is an effective DL method to extract the features of raw data automatically. This paper develops a fault diagnosis method using CNN for InfRared Thermal (IRT) image. First, IRT technique is utilized to capture the IRT images of rotating machinery. Second, the CNN is applied to extract fault features from the IRT images. In the end, the obtained features are fed into the Softmax Regression (SR) classifier for fault pattern identification. The effectiveness of the proposed method is validated using two different experimental data. Results show that the proposed method has a superior performance in identification various faults on rotor and bearings comparing with other deep learning models and traditional vibration-based method.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
Feng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998
Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components
Ciampa, F., Mahmoodi, P., Pinto, F., & Meo, M. (2018) · Sensors · doi:10.3390/s18020609 · Cited by 568
Cited by
Zhao, Z., Li, T., Wu, J., Sun, C., Wang, S., Yan, R., & Chen, X. (2020) · ISA Transactions · doi:10.1016/j.isatra.2020.08.010 · Cited by 688
Infrared machine vision and infrared thermography with deep learning: A review
He, Y., Deng, B., Wang, H., Cheng, L., Zhou, K., Cai, S., & Ciampa, F. (2021) · Infrared Physics & Technology · doi:10.1016/j.infrared.2021.103754 · Cited by 319
Digital Twin in Aerospace Industry: A Gentle Introduction
Li, L., Aslam, S., Wileman, A., & Perinpanayagam, S. (2022) · IEEE Access · doi:10.1109/access.2021.3136458 · Cited by 296
Convolutional neural network based bearing fault diagnosis of rotating machine using thermal images
Choudhary, A., Mian, T., & Fatima, S. (2021) · Measurement · doi:10.1016/j.measurement.2021.109196 · Cited by 292
Shao, H., Li, W., Cai, B., Wan, J., Xiao, Y., & Yan, S. (2023) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3232766 · Cited by 284
Metadata
- Authors
- LI, Y., DU, X., WAN, F., WANG, X., & YU, H.
- Venue
- Chinese Journal of Aeronautics
- Publisher
- Elsevier BV
- Published
- 2020-02
- Volume
- 33
- Issue
- 2
- Pages
- 427-438
- ISSN
- 1000-9361 (ISSN-L)
- OpenAlex
- W2971524931
- Cited by
- 214
- References
- 4
- FWCI
- 11.10
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.