Electrochemical machining of complex components of aero-engines: Developments, trends, and technological advances
Open accessThe DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Abstract
Because of several advantages, such as no tool wear, independence on the mechanical properties of the material, and high machining efficiency, electrochemical machining (ECM) has become a viable method for machining components in numerous industrial applications, particularly in the manufacture of typical aero-engine components with complex structures fabricated from materials that are difficult to cut. This paper highlights the current developments, new trends, and technological advances of key factors of ECM, such as electrochemical dissolution characteristics of novel difficult to cut materials which are often used in aero-engine, numerical simulation of electrochemical process, design for the complex profile and structure of cathode tool, flow field simulation and design for uniform electrolyte flow, and innovation of electrochemical machining or hybrid methods which reflect the state of the art in academic and industrial research on electrochemical machining in aero-engine manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
An overview on the use of titanium in the aerospace industry
Boyer, R. R. (1996) · Materials Science and Engineering: A · doi:10.1016/0921-5093(96)10233-1 · Cited by 2,442
Titanium alloys for aerospace applications
Peters, M., Kumpfert, J., Ward, C. H., & Leyens, C. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310095 · Cited by 894
Klocke, F., Klink, A., Veselovac, D., Aspinwall, D. K., Soo, S. L., Schmidt, M., Schilp, J., Levy, G., & Kruth, J.-P. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.05.004 · Cited by 417
The effect of tyre and rider properties on the stability of a bicycle
Bulsink, V. E., Doria, A., van de Belt, D., & Koopman, B. (2015) · Advances in Mechanical Engineering · doi:10.1177/1687814015622596 · Cited by 275
Modelling of ECM and EDM processes
Hinduja, S., & Kunieda, M. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.05.011 · Cited by 251
Klocke, F., Zeis, M., Klink, A., & Veselovac, D. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.03.040 · Cited by 182
Tube electrode high-speed electrochemical discharge drilling using low-conductivity salt solution
Zhang, Y., Xu, Z., Zhu, D., & Xing, J. (2015) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2015.02.011 · Cited by 156
Self-citationEffect of Anodic Behavior on Electrochemical Machining of TB6 Titanium Alloy
Liu, W., Ao, S., Li, Y., Liu, Z., Zhang, H., Manladan, S. M., Luo, Z., & Wang, Z. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.03.025 · Cited by 137
Interdisciplinary modelling of the electrochemical machining process for engine blades
Klocke, F., Zeis, M., & Klink, A. (2015) · CIRP Annals · doi:10.1016/j.cirp.2015.04.071 · Cited by 118
Klocke, F., Zeis, M., Klink, A., & Veselovac, D. (2012) · Procedia CIRP · doi:10.1016/j.procir.2012.05.048 · Cited by 113
Burger, M., Koll, L., Werner, E. A., & Platz, A. (2011) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2011.08.001 · Cited by 109
Curtis, D., Soo, S. L., Aspinwall, D. K., & Sage, C. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.03.074 · Cited by 106
A high efficiency electrochemical machining method of blisk channels
Xu, Z., Xu, Q., Zhu, D. Q., & Gong, T. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.03.068 · Cited by 101
Self-citationExperimental research on electrochemical machining of titanium alloy Ti60 for a blisk
Chen, X., Xu, Z., Zhu, D. Q., Fang, Z., & Zhu, D. (2015) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2015.09.010 · Cited by 101
Self-citationKlocke, F., Zeis, M., Klink, A., & Veselovac, D. (2013) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2013.02.008 · Cited by 100
Electrochemical Machining of High-temperature Titanium Alloy Ti60
Xu, Z., Chen, X., Zhou, Z., Qin, P., & Zhu, D. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.206 · Cited by 95
Self-citationElectrochemical Dissolution Behavior of the Nickel-Based Cast Superalloy K423A in NaNO3 Solution
Ge, Y., Zhu, Z., & Wang, D. (2017) · Electrochimica Acta · doi:10.1016/j.electacta.2017.09.046 · Cited by 89
Electrochemical machining of gamma titanium aluminide intermetallics
Clifton, D. A., Mount, A. R., Jardine, D. J., & Roth, R. (2001) · Journal of Materials Processing Technology · doi:10.1016/s0924-0136(00)00739-1 · Cited by 61
Xu, Z., Sun, L., Hu, Y., & Zhang, J. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5491-y · Cited by 60
Self-citationQu, N., & Xu, Z. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-4943-8 · Cited by 51
Self-citationFundamental Machining Characteristics of Ultrasonic-Assisted Electrochemical Grinding of Ti–6Al–4V
Li, S., Wu, Y., Nomura, M., et al. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4039855 · Cited by 51
Klocke, F., Herrig, T., Zeis, M., & Klink, A. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.050 · Cited by 45
Klocke, F., Zeis, M., Herrig, T., Harst, S., & Klink, A. (2014) · Procedia CIRP · doi:10.1016/j.procir.2014.08.014 · Cited by 43
Klocke, F., Zeis, M., & Klink, A. (2012) · Key engineering materials · doi:10.4028/www.scientific.net/kem.504-506.1237 · Cited by 42
Zhang, J., Zhu, D. Q., Xu, Z., Zhang, K., Liu, J., Qu, N., & Zhu, D. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2015.12.025 · Cited by 41
Self-citationZhang, H., & Xu, J. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3830-4 · Cited by 39
Experimental Investigation on Electrochemical Machining of γ-TiAl Intermetallic
Liu, J., Zhu, D., Zhao, L., & Xu, Z. (2015) · Procedia CIRP · doi:10.1016/j.procir.2015.08.049 · Cited by 38
Self-citationElectrochemical Machining – Special Equipment and Applications in Aircraft Industry
Ruszaj, A., Gawlik, J., & Skoczypiec, S. (2016) · Management and Production Engineering Review · doi:10.1515/mper-2016-0015 · Cited by 33
Smets, N., Damme, S. V., WILDE, D. D., Weyns, G., & Deconinck, J. (2008) · Journal of Applied Electrochemistry · doi:10.1007/s10800-007-9472-4 · Cited by 32
Trajectory control strategy of cathodes in blisk electrochemical machining
Zhu, D. Q., Zhu, D., Xu, Z., & Zhou, L. (2013) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2013.06.012 · Cited by 29
Self-citationInvestigation on flow field in electrochemical trepanning of aero engine diffuser
Gu, Z., Zhu, D. Q., Xue, T., Liu, A., & Zhu, D. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9111-5 · Cited by 29
Xu, Z., Liu, J., Xu, Q. Z., Gong, T., Zhu, D. Q., & Qu, N. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-6815-x · Cited by 28
Self-citationInvestigation of electrochemical mill-grinding using abrasive tools with bottom insulation
Niu, S., Qu, N., & Li, H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2043-5 · Cited by 25
Study of tool trajectory in blisk channel ECM with spiral feeding
Zhang, J., Xu, Z., Zhu, D. Q., Su, W., & Zhu, D. (2016) · Materials and Manufacturing Processes · doi:10.1080/10426914.2016.1151040 · Cited by 20
Self-citationFlow Field Design in Electrochemical Machining of Diffuser
Zhu, D. Q., Gu, Z., Xue, T., & Zhu, D. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.205 · Cited by 19
Tang, L., Zhu, Q., Zhao, J., & Fan, Z. J. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-8976-7 · Cited by 16
Klocke, F., Herrig, T., Zeis, M., Holsten, M., & Klink, A. (2016) · Procedia CIRP · doi:10.1016/j.procir.2016.02.207 · Cited by 10
Metadata
- Authors
- XU, Z., & WANG, Y.
- Venue
- Chinese Journal of Aeronautics
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 34
- Issue
- 2
- Pages
- 28-53
- ISSN
- 1000-9361 (ISSN-L)
- OpenAlex
- W2980178233
- Cited by
- 284
- References
- 37
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.