The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Study on the performance of metakaolin based geopolymer for Mn(II) and Co(II) removal
Abstract
The aim of this study is to remove heavy metals ions of Mn(II) and Co(II) from aqueous solutions by using metakaolin based geopolymer, a new potential low-cost alternative adsorbent material. The parameters of initial pH, adsorbent amount, time of contact and initial metal ion concentration on the metal removal performance were studied using a batch method at 30 °C. It was found that the Langmuir isotherm described the adsorption data very well and the maximum monolayer adsorption capacities were found to be 72.34 mg g−1 (1.32 × 10−3 mol g−1) and 69.23 mg g−1 (1.18 × 10−3 mol g−1) for Mn(II) and Co(II), respectively. The kinetic studies showed that adsorption of Mn(II) and Co(II) followed the pseudo-second-order kinetic model. Adsorption yield was found to be slightly sensitive to temperature and ionic strength and no pH adjustment was necessary to get high adsorption yield. High metal ion adsorption performance in both batch and continuous systems is an important indicative of geopolymer efficiency. Ion exchange appears to be an effective mechanism for the metal ion adsorption onto geopolymer. It is concluded that Mn(II) and Co(II) ions are efficiently removed from aqueous solutions by metakaolin based geopolymer which could be employed as a low-cost and excellent alternative for wastewater treatment.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Removal of heavy metal ions from wastewaters: A review
Fu, F., & Wang, Q. (2011) · Journal of Environmental Management · doi:10.1016/j.jenvman.2010.11.011 · Cited by 8,703
The removal of heavy metal cations by natural zeolites
Erdem, E., Karapinar, N., & Donat, R. (2004) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2004.08.028 · Cited by 1,598
Solid-state conversion of fly ash to effective adsorbents for Cu removal from wastewater
Wang, S., Li, L., & Zhu, Z. H. (2007) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2006.06.018 · Cited by 220
Cited by
A review on geopolymers as emerging materials for the adsorption of heavy metals and dyes
Siyal, A. A., Shamsuddin, M. R., Khan, M. I., Rabat, N. E., Zulfiqar, M., Man, Z., Siame, J., & Azizli, K. A. (2018) · Journal of Environmental Management · doi:10.1016/j.jenvman.2018.07.046 · Cited by 443
Metadata
- Authors
- Kara, I., Tunc, D., Sayin, F., & Akar, S. T.
- Venue
- Applied Clay Science
- Publisher
- Elsevier BV
- Published
- 2018-09
- Volume
- 161
- Pages
- 184-193
- ISSN
- 0169-1317 (ISSN-L)
- OpenAlex
- W2802041808
- Cited by
- 160
- References
- 3
- FWCI
- 6.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.