The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Functionally graded lattice structure topology optimization for the design of additive manufactured components with stress constraints
Open accessAbstract
Abstract Advances in additive manufacturing (AM) have drawn considerable interest due to its ability to produce geometrically complex structure, such as lattice materials. In this work, a novel methodology is proposed to design graded lattice structure through topology optimization under stress constraint, in order to generate lightweight lattice structure design with predictable yield performance. Instead of using the power law of material interpolation in the SIMP method, asymptotic homogenization method is employed to compute the effective elastic properties of lattice material in terms of design variable, i.e. relative density. For yield strength, a multiscale failure model is proposed to capture yield strength of microstructure with macroscopic stress. At macroscale, a modified Hill’s yield criterion is employed to describe anisotropic yield strength of lattice material. The material constants in Hill’s model are assumed to be a function of relative density, and thus a model is built up to formulate yield strength of lattice structure with macroscopic stress. The experimental verification on the printed samples demonstrates that both the homogenized elastic model and yield model can accurately describe the elasticity and plasticity of the lattice structure. Based on the proposed material interpolation for lattice structure, a lattice structure topology optimization framework is proposed for minimizing total weight of the structure under stress constraint. The sensitivity analysis is performed for the implementation of the optimization algorithm. Two three-dimensionally numerical examples are performed to demonstrate the effectiveness of the proposed optimization method, as well as accuracy of the proposed homogenization technique for graded lattice structure design. Experiment is conducted to systematically examine yielding of the optimally graded lattice structure design and compare its performance with a uniform structure. It is found that the proposed optimization framework is valid for the design examples examined and can significantly enhance mechanical performance of the structure (i.e. yield loading, stiffness, energy absorption, etc.)
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generating optimal topologies in structural design using a homogenization method
Bendsøe, M. P., & Kikuchi, N. (1988) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(88)90086-2 · Cited by 7,467
The method of moving asymptotes—a new method for structural optimization
Svanberg, K. (1987) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620240207 · Cited by 5,573
A level set method for structural topology optimization
Wang, M. Y., Wang, X., & Guo, D. (2003) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/s0045-7825(02)00559-5 · Cited by 3,232
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Material interpolation schemes in topology optimization
Bendsøe, M. P., & Sigmund, O. (1999) · Archive of Applied Mechanics (Ingenieur Archiv) · doi:10.1007/s004190050248 · Cited by 2,827
Structural optimization using sensitivity analysis and a level-set method
Allaire, G., Jouve, F., & Toader, A.-M. (2004) · Journal of Computational Physics · doi:10.1016/j.jcp.2003.09.032 · Cited by 2,759
A simple evolutionary procedure for structural optimization
Xie, Y. M., & Steven, G. P. (1993) · Computers & Structures · doi:10.1016/0045-7949(93)90035-c · Cited by 2,707
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
Bendsøe, M. P., & Sigmund, O. (2004) · Springer eBooks · doi:10.1007/978-3-662-05086-6 · Cited by 1,727
Guo, X., Zhang, W., & Zhong, W. (2014) · Journal of Applied Mechanics · doi:10.1115/1.4027609 · Cited by 1,243
Stress-based topology optimization for continua
Le, C. H., Norato, J. A., Bruns, T. E., Ha, C., & Tortorelli, D. A. (2009) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-009-0440-y · Cited by 885
Topology optimization of continuum structures with local stress constraints
Duysinx, P., & Bendsøe, M. P. (1998) · International Journal for Numerical Methods in Engineering · doi:10.1002/(sici)1097-0207(19981230)43:8<1453::aid-nme480>3.0.co;2-2 · Cited by 809
Evolutionary Structural Optimization
Xie, Y. M., & Steven, G. P. (1997) · Springer eBooks · doi:10.1007/978-1-4471-0985-3 · Cited by 803
Zhang, W., Yuan, J., Zhang, J., & Guo, X. (2015) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-015-1372-3 · Cited by 655
?-relaxed approach in structural topology optimization
Cheng, G., & Guo, X. (1997) · Structural and Multidisciplinary Optimization · doi:10.1007/bf01197454 · Cited by 611
Compressive failure modes and energy absorption in additively manufactured double gyroid lattices
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., & Ashcroft, I. A. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.04.003 · Cited by 575
Solutions to shape and topology eigenvalue optimization problems using a homogenization method
Díaz, A., & Kikuchi, N. (1992) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.1620350707 · Cited by 520
A comparison of homogenization and standard mechanics analyses for periodic porous composites
Hollister, S. J., & Kikuchi, N. (1992) · Computational Mechanics · doi:10.1007/bf00369853 · Cited by 509
Stress constrained topology optimization
Holmberg, E., Torstenfelt, B., & Klarbring, A. (2013) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-012-0880-7 · Cited by 480
Gaynor, A. T., & Guest, J. K. (2016) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-016-1551-x · Cited by 476
Guo, X., Zhang, W., Zhang, J., & Yuan, J. (2016) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2016.07.018 · Cited by 391
Computer-Aided Design for Additive Manufacturing of Cellular Structures
Rosen, D. W. (2007) · Computer-Aided Design and Applications · doi:10.1080/16864360.2007.10738493 · Cited by 376
STUDY ON TOPOLOGY OPTIMIZATION WITH STRESS CONSTRAINTS
Cheng, G., & Zheng, J. (1992) · Engineering Optimization · doi:10.1080/03052159208941276 · Cited by 300
Design for Additive Manufacturing of Cellular Structures
Chu, C., Graf, G., & Rosen, D. W. (2008) · Computer-Aided Design and Applications · doi:10.3722/cadaps.2008.686-696 · Cited by 300
Asymptotic Homogenization of Composite Materials and Structures
Kalamkarov, A. L., Andrianov, I. V., & Danishevs’kyy, V. V. (2009) · Applied Mechanics Reviews · doi:10.1115/1.3090830 · Cited by 297
Self-supporting structure design in additive manufacturing through explicit topology optimization
Guo, X., Zhou, J., Zhang, W., et al. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.05.003 · Cited by 297
Qian, X. (2017) · International Journal for Numerical Methods in Engineering · doi:10.1002/nme.5461 · Cited by 278
Arabnejad, S., & Pasini, D. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2013.10.003 · Cited by 266
Topology optimization of continuum structures with local and global stress constraints
París, J., Navarrina, F., Colominas, I., & Casteleiro, M. (2008) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-008-0336-2 · Cited by 260
Zhang, P., Toman, J., Yu, Y., Biyikli, E., Kırca, M., Chmielus, M., & To, A. C. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028724 · Cited by 248
Self-citationCheng, L., Zhang, P., Biyikli, E., Bai, J., Robbins, J., & To, A. (2017) · Rapid Prototyping Journal · doi:10.1108/rpj-04-2016-0069 · Cited by 229
Self-citationStructural Topology Optimization Through Explicit Boundary Evolution
Zhang, W., Yang, W., Zhou, J., Li, D., & Guo, X. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4034972 · Cited by 227
Topology optimization of microstructures of cellular materials and composites for macrostructures
Huang, X., Zhou, S., Xie, Y. M., et al. (2012) · Computational Materials Science · doi:10.1016/j.commatsci.2012.09.018 · Cited by 184
Minimum stress optimal design with the level set method
Allaire, G., & Jouve, F. (2008) · Engineering Analysis with Boundary Elements · doi:10.1016/j.enganabound.2007.05.007 · Cited by 177
Zhang, W., Li, D., Zhou, J., Du, Z., Li, B., & Guo, X. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.01.050 · Cited by 175
Stress-related topology optimization of continuum structures involving multi-phase materials
Guo, X., Zhang, W., & Zhong, W. (2013) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2013.10.003 · Cited by 161
Design for Additive Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. E. (2009) · Springer eBooks · doi:10.1007/978-1-4419-1120-9_11 · Cited by 154
Liu, C., Du, Z., Zhang, W., et al. (2017) · Journal of Applied Mechanics · doi:10.1115/1.4036941 · Cited by 154
Cheng, L., Liu, J., Liang, X. Y., & To, A. C. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.12.024 · Cited by 141
Self-citationWang, X., Zhang, P., Ludwick, S. J., et al. (2017) · Additive manufacturing · doi:10.1016/j.addma.2017.10.001 · Cited by 108
Cheng, L., Liang, X. Y., Belski, E., Wang, X., Sietins, J. M., Ludwick, S., & To, A. C. (2018) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4040622 · Cited by 91
Self-citationA reduced multiscale model for nonlinear structural topology optimization
Xia, L., & Breitkopf, P. (2014) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2014.07.024 · Cited by 77
Cheng, L., Liu, J., & To, A. C. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1905-7 · Cited by 69
Self-citationSong, W., Krishnaswamy, V., & Pucha, R. V. (2015) · Composite Structures · doi:10.1016/j.compstruct.2015.11.013 · Cited by 66
Cited by
Plocher, J., & Panesar, A. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108164 · Cited by 669
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Khan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Deep generative modeling for mechanistic-based learning and design of metamaterial systems
Wang, L., Chan, Y.-C., Ahmed, F., Liu, Z., Zhu, P., & Chen, W. (2020) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2020.113377 · Cited by 363
Metadata
- Authors
- Cheng, L., Bai, J., & To, A. C.
- Venue
- Computer Methods in Applied Mechanics and Engineering
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 344
- Pages
- 334-359
- ISSN
- 0045-7825 (ISSN-L)
- OpenAlex
- W2898199848
- Cited by
- 306
- References
- 45
- FWCI
- 25.37
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.