The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Surfactant concentration and pH effects on the zeta potential values of alumina nanofluids to inspect stability
Abstract
Abstract Nanofluids are complex fluids, mainly proposed to improve the efficiency of thermal systems. However, their poor stability, caused by the agglomeration and sedimentation of nanoparticles over time, has limited their practical application. A common technique to increase the stability of nanofluids is to add surfactants, which produce electrostatic or steric repulsion between nanoparticles, thus avoiding their agglomeration. This work evaluated the effects of surfactants and their concentration on the zeta potential and hydrodynamic diameter at different pH values as an indicator of nanofluids stability. Commercial alumina nanoparticles (0.1 wt.%) were dispersed in deionized water using two surfactants (cetyltrimethylammonium bromide, CTAB and sodium dodecylbenzenesulfonate, SDBS) at different concentrations, and the pH values were varied (2–12) by adding hydrochloric acid and sodium hydroxide. The results show the importance of the critical micelle concentration value in the nanofluids stabilization by electrostatic repulsion between nanoparticles and indicate that SDBS at a concentration of 0.064 wt.% (critical micelle concentration) offers the best dispersion conditions according with their zeta potential values, allowing high stability regardless of the pH value of the suspension.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Enhancing Thermal Conductivity of Fluids With Nanoparticles
Choi, S. U. S. (1995) · Developments and Applications of Non-Newtonian Flows · doi:10.1115/imece1995-0926 · Cited by 9,324
DLS and zeta potential – What they are and what they are not?
Bhattacharjee, S. (2016) · Journal of Controlled Release · doi:10.1016/j.jconrel.2016.06.017 · Cited by 4,702
A Review on Nanofluids: Preparation, Stability Mechanisms, and Applications
Yu, W., & Xie, H. (2012) · Journal of Nanomaterials · doi:10.1155/2012/435873 · Cited by 1,770
A review on hybrid nanofluids: Recent research, development and applications
Sarkar, J., Ghosh, P., & Adil, A. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2014.11.023 · Cited by 1,295
A critical review of traditional and emerging techniques and fluids for electronics cooling
Sohel Murshed, S. M., & Nieto de Castro, C. A. (2017) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.04.112 · Cited by 987
Measurements of nanofluid viscosity and its implications for thermal applications
Prasher, R., Song, D., Wang, J., & Phelan, P. (2006) · Applied Physics Letters · doi:10.1063/1.2356113 · Cited by 808
Applied Surfactants: Principles and Applications
Tadros, T. F. (2005) · Medical Entomology and Zoology · Cited by 649
Dispersion behavior and thermal conductivity characteristics of Al2O3–H2O nanofluids
Zhu, D., Li, X., Wang, N., Wang, X., Gao, J., & Li, H. (2008) · Current Applied Physics · doi:10.1016/j.cap.2007.12.008 · Cited by 560
Recent advances in application of nanofluids in heat transfer devices: A critical review
Sajid, M. U., & Ali, H. M. (2019) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2018.12.057 · Cited by 544
Evaluation on dispersion behavior of the aqueous copper nano-suspensions
Li, X., Zhu, D., & Wang, X. (2007) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2007.02.067 · Cited by 417
Preparation and evaluation of stable nanofluids for heat transfer application: A review
Babita, B., Sharma, S. K., & Gupta, S. M. (2016) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2016.06.029 · Cited by 375
Sezer, N., Atieh, M. A., & Koç, M. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.12.016 · Cited by 354
Thermal properties of nanofluids
Philip, J., & Shima, P. D. (2012) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2012.08.001 · Cited by 298
A review on preparation methods and challenges of nanofluids
Sidik, N. A. C., Mohammed, H. A., Alawi, O. A., et al. (2014) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2014.03.002 · Cited by 298
Effects of surfactant on stability and thermo-physical properties of metal oxide nanofluids
Khairul, M. A., Shah, K., Doroodchi, E., Azizian, R., & Moghtaderi, B. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.03.079 · Cited by 258
Effects of surfactant on the stability and thermal conductivity of Al2O3/de-ionized water nanofluids
Xia, G., Jiang, H., Liu, R., & Zhai, Y. (2014) · International Journal of Thermal Sciences · doi:10.1016/j.ijthermalsci.2014.05.004 · Cited by 246
Experimental stability analysis of different water-based nanofluids
Fedele, L., Colla, L., Bobbo, S., Barison, S., & Agresti, F. (2011) · Nanoscale Research Letters · doi:10.1186/1556-276x-6-300 · Cited by 246
Sarsam, W. S., Amiri, A., Kazi, S. N., & Badarudin, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.082 · Cited by 222
Asadi, A., Aberoumand, S., Moradikazerouni, A., Pourfattah, F., Żyła, G., Estellé, P., Mahian, O., Wongwises, S., Nguyen, H. M., & Arabkoohsar, A. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.04.054 · Cited by 201
Stability and electrical conductivity of water-base Al2O3 nanofluids for different applications
Zawrah, M. F., Khattab, R. M., Girgis, L. G., El Daidamony, H., & Abdel Aziz, R. E. (2016) · HBRC Journal · doi:10.1016/j.hbrcj.2014.12.001 · Cited by 162
Asadi, A., Asadi, M., Siahmargoi, M., et al. (2016) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2016.12.022 · Cited by 160
The effect of surfactants on bubble growth, wall thermal patterns and heat transfer in pool boiling
HETSRONI, G., Zakin, J. L., Lin, Z., et al. (2001) · International Journal of Heat and Mass Transfer · doi:10.1016/s0017-9310(00)00099-5 · Cited by 157
Ilyas, S. U., Pendyala, R., Narahari, M., & Lim, S. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.01.079 · Cited by 156
Amiri, A., Sadri, R., Shanbedi, M., Ahmadi, G., Chew, B. T., Kazi, S. N., & Dahari, M. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2014.12.051 · Cited by 146
Thermal conductivity, viscosity and surface tension of nanofluids based on FeC nanoparticles
Huminic, A., Huminic, G., Fleaca, C. T., Dumitrache, F. V., & Morjan, I. G. (2015) · Powder Technology · doi:10.1016/j.powtec.2015.06.040 · Cited by 127
Titanium dioxide nanofluids for heat transfer applications
Saleh, R., Putra, N. S. D., Wibowo, R. E., Septiadi, W. N., & Prakoso, S. P. (2013) · Experimental Thermal and Fluid Science · doi:10.1016/j.expthermflusci.2013.08.018 · Cited by 126
Alarifi, I. M., Alkouh, A. B., Ali, V., Nguyẽn, H. M., & Asadi, A. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.07.039 · Cited by 125
Otterstedt, J., & Brandreth, D. A. (1998) · Springer eBooks · doi:10.1007/978-1-4757-6523-6 · Cited by 79
Sadeghi, R., Haghshenasfard, M., Etemad, S. G., & Keshavarzi, E. (2016) · Advanced Powder Technology · doi:10.1016/j.apt.2016.08.003 · Cited by 14
Cited by
Chen, G., Svirskis, D., Lu, W., Ying, M., Li, H., Liu, M., & Wen, J. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2021.118592 · Cited by 36
Metadata
- Authors
- Cacua, K., Ordoñez, F., Zapata, C., Herrera, B., Pabón, E., & Buitrago-Sierra, R.
- Venue
- Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 583
- Pages
- 123960
- ISSN
- 0927-7757 (ISSN-L)
- OpenAlex
- W2972810518
- Cited by
- 310
- References
- 29
- FWCI
- 8.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.