The DOI matches its Crossref record.
The effect of ammonia addition on the low-temperature autoignition of n-heptane: An experimental and modeling study
Abstract
Abstract Ammonia (NH3) is receiving increasing attention as an alternative engine fuel due to its carbon-free nature. However, its fundamental combustion characteristics, such as higher autoignition temperature and lower burning velocity compared to conventional hydrocarbons, limit its direct use in traditional engines. To confront this dilemma, hydrocarbon/NH3 blending fuels are seen as one of the most appropriate ways to exploit its advantage and offset its weaknesses. Using n-heptane as a representative of hydrocarbons, this study investigated the effect of NH3 addition on the low-temperature autoignition of n-heptane. The ignition delay times of five n-heptane/NH3 mixtures with NH3 fractions of 0%, 20%, and 40% were measured in a rapid compression machine at temperatures of 635–945 K, pressures of 10 and 15 bar, and equivalence ratios of 1.0 and 2.0. Experimental results show that the n-heptane/NH3 blending fuels exhibit pronounced low-temperature reactivity, and both the total and the first-stage ignition delay times increase with the increase of NH3 fraction. A blending mechanism of n-heptane/NH3 was compiled based on the existing n-heptane mechanism and NH3 mechanism. It is found that the blending mechanism is capable to predict the inhibition effect of NH3 addition on n-heptane autoignition and qualitatively capture the dependence of ignition delay time on equivalence ratio and oxygen mole fraction. Nevertheless, there are significant discrepancies between the experiments and the simulation. Furthermore, kinetic analyses, including species evolution, rate of production and sensitivity of OH radical were conducted sequentially to reveal the autoignition kinetics of NH3/n-heptane blends and the interaction between n-heptane and NH3. Suggestions are provided for the further development of the blending mechanism.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Review on Ammonia as a Potential Fuel: From Synthesis to Economics
Valera-Medina, A., Amer-Hatem, F., Azad, A. K., Dedoussi, I. C., de Joannon, M., Fernandes, R. X., Glarborg, P., Hashemi, H., He, X., Mashruk, S., et al. (2021) · Energy & Fuels · doi:10.1021/acs.energyfuels.0c03685 · Cited by 1,061
A review on ammonia, ammonia-hydrogen and ammonia-methane fuels
Chai, W. S., Bao, Y., Jin, P., Tang, G., & Zhou, L. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111254 · Cited by 1,028
Dai, L., Hashemi, H., Glarborg, P., Gersen, S., Marshall, P., Mokhov, A., & Levinsky, H. (2021) · Combustion and Flame · doi:10.1016/j.combustflame.2020.12.048 · Cited by 282
Hydrogen combustion, production, and applications: A review
Habib, M. A., Abdulrahman, G. A. Q., Alquaity, A. B. S., & Qasem, N. A. A. (2024) · Alexandria Engineering Journal · doi:10.1016/j.aej.2024.05.030 · Cited by 276
Ammonia as Green Fuel in Internal Combustion Engines: State-of-the-Art and Future Perspectives
Tornatore, C., Marchitto, L., Sabia, P., & De Joannon, M. (2022) · Frontiers in Mechanical Engineering · doi:10.3389/fmech.2022.944201 · Cited by 204
Metadata
- Authors
- Yu, L., Zhou, W., Feng, Y., Wang, W., Zhu, J., Qian, Y., & Lu, X.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 217
- Pages
- 4-11
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W3015836696
- Cited by
- 209
- References
- 0
- FWCI
- 7.81
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The effect of ammonia addition on the low-temperature autoignition of n-heptane: An experimental and modeling study. https://app.cochat.ai/papers/10.1016/j.combustflame.2020.03.019
- The paper
- Yu, L., Zhou, W., Feng, Y., Wang, W., Zhu, J., Qian, Y., & Lu, X. (2020). The effect of ammonia addition on the low-temperature autoignition of n-heptane: An experimental and modeling study. Combustion and Flame. https://doi.org/10.1016/j.combustflame.2020.03.019
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.