The DOI matches its Crossref record.
The temperature dependence of the laminar burning velocity and superadiabatic flame temperature phenomenon for NH3/air flames
Abstract
Abstract Combustion of ammonia (NH3) as a carbon-free alternative fuel has been recently widely studied, with vast majority of the burning velocity data obtained at room temperature. In the present study, the laminar burning velocity SL of NH3/air mixtures has been measured at unburnt gas temperature Tu from 298 K to 448 K, covering equivalence ratios from 0.85 to 1.25 and at 1 atm using the heat flux method. Kinetic simulations were made with five literature mechanisms developed for NH3 combustion, i.e., Nakamura et al., Otomo et al., San Diego, Okafor et al., and Mei et al. mechanisms, and the influence of radiation heat losses was considered. Using the obtained burning velocity data at different temperatures, the temperature dependence coefficients α in S L S L 0 = ( T u T u 0 ) α were derived, and compared with different models’ predictions. Further analyses of the temperature dependence of SL were carried out through examination of the overall activation energy, temperature and species profiles as well as the reaction paths, and a unique flame structure at the rich side of adiabatic NH3/air flames was found, which resembles ‘over-rich’ phenomena in hydrocarbon flames. At equivalence ratio larger than 1.1 ± 0.05, the NH3/air flames become so rich that (1) the NH2 radical overwhelms the H and OH radicals in maximum mole fraction; (2) after the flame front, H2O converts back to H2 with NO formed at the same time, causing the superadiabatic flame temperature phenomena, i.e. adiabatic flame temperature being lower than the maximum achieved in the flame. Moreover, local minimum NO concentration is found right after the over-rich NH3/air flame front, which may be helpful in reducing NO emissions from NH3 flames in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wang, Z., Han, X., He, Y., Zhu, R., Zhu, Y., Zhou, Z., & Cen, K. (2021) · Combustion and Flame · doi:10.1016/j.combustflame.2021.02.038 · Cited by 371
Self-citationYousefi, A., Guo, H., Dev, S., Lafrance, S., & Liko, B. (2022) · Fuel · doi:10.1016/j.fuel.2022.123412 · Cited by 297
Ammonia combustion and emissions in practical applications: A review
Alnajideen, M., Shi, H., Northrop, W., Emberson, D., Kane, S., Czyzewski, P., Alnaeli, M., Mashruk, S., Rouwenhorst, K., Yu, C., et al. (2024) · Carbon Neutrality · doi:10.1007/s43979-024-00088-6 · Cited by 146
Metadata
- Authors
- Han, X., Wang, Z., He, Y., Liu, Y., Zhu, Y., & Konnov, A. A.
- Venue
- Combustion and Flame
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 217
- Pages
- 314-320
- ISSN
- 0010-2180 (ISSN-L)
- OpenAlex
- W3023459450
- Cited by
- 207
- References
- 0
- FWCI
- 9.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.