Data-driven failure mode and effect analysis (FMEA) to enhance maintenance planning
The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Abstract
Abstract Nowadays, the availability of data from the manufacturing environment, such as process and operation related data or past maintenance activities enable new possibilities for advanced data analytics like prediction of failure behavior. Possible predictions could consider faults of specific components or even the current product and component properties. The paper presents a data-driven Failure Mode and Effect Analysis (FMEA) methodology by using deep learning models on historical and operational data from the use stage of industrial investment goods. The developed methodology is supposed to support the maintenance planning for industrial investment goods by enhancing transparency and providing decision support. The developed framework is applied to and validated by a case study from the aviation sector. The results show that the accuracy of the fault prediction is around 95 %. By integrating these results into a data-driven FMEA framework, risk and failure occurrence estimations are no longer subjective. Especially the estimation of failure probabilities no longer solely depends on the experience and knowledge from employees.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ADADELTA: An Adaptive Learning Rate Method
Zeiler, M. D. (2012) · arXiv · doi:10.48550/arxiv.1212.5701 · Cited by 5,322
Modified failure mode and effects analysis using approximate reasoning
Pillay, A., & Wang, J. (2003) · Reliability Engineering & System Safety · doi:10.1016/s0951-8320(02)00179-5 · Cited by 581
Total productive maintenance: literature review and directions
Ahuja, I. P. S., & Khamba, J. S. (2008) · International Journal of Quality & Reliability Management · doi:10.1108/02656710810890890 · Cited by 574
Continuous maintenance and the future – Foundations and technological challenges
Roy, R., Stark, R., Tracht, K., Takata, S., & Mori, M. (2016) · CIRP Annals · doi:10.1016/j.cirp.2016.06.006 · Cited by 309
Cited by
From Corrective to Predictive Maintenance—A Review of Maintenance Approaches for the Power Industry
Molęda, M., Małysiak-Mrozek, B., Ding, W., Sunderam, V., & Mrozek, D. (2023) · Sensors · doi:10.3390/s23135970 · Cited by 288
Ervural, B., & Ayaz, H. I. (2023) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2023.107525 · Cited by 91
Hybrid Intelligence Failure Analysis for Industry 4.0: A Literature Review and Future Prospective
Mokhtarzadeh, M., Rodríguez-Echeverría, J., Semanjski, I., & Gautama, S. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-024-02376-5 · Cited by 35
“Studies such as Filz et al. (2021b) Zuo et al. (2016), Dey and Stori (2005), Man-galathu et al. (2020), Yang et al. (2015) and Ma et al. (2021) are good examples for Levels 2 and 3.”
InfluentialRatajszczak, K., Oancea, A.-V., Misztal, A., Ionescu, N., Ionescu, L. M., & Wencek, A. (2025) · Applied Sciences · doi:10.3390/app152413199 · Cited by 3
Metadata
- Authors
- Filz, M.-A., Langner, J. E. B., Herrmann, C., & Thiede, S.
- Venue
- Computers in Industry
- Publisher
- Elsevier BV
- Published
- 2021-08
- Volume
- 129
- Pages
- 103451
- ISSN
- 0166-3615 (ISSN-L)
- OpenAlex
- W3144414893
- Cited by
- 124
- References
- 4
- FWCI
- 14.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.