The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
A general model for the permeability of fibrous porous media based on fluid flow simulations using the lattice Boltzmann method
Open accessAbstract
Fluid flow analyses for porous media are of great importance in a wide range of industrial applications including, but not limited to, resin transfer moulding, filter analysis, transport of underground water and pollutants, and hydrocarbon recovery. Permeability is perhaps the most important property that characterizes porous media; however, its determination for different types of porous media is challenging due its complex dependence on the pore-level structure of the media. In the present work, fluid flow in three-dimensional random fibrous media is simulated using the lattice Boltzmann method. We determine the permeability of the medium using the Darcy law across a wide range of void fractions (0.08 6 / 6 0.99) and find that the values for the permeability that we obtain are consistent with available experimental data. We use our numerical data to develop a semi-empirical constitutive model for the permeability of fibrous media as a function of their porosity and of the fibre diameter. The model, which is underpinned by the theoretical analysis of flow through cylinder arrays presented by [Gebart BR. Permeability of unidirectional reinforcements for RTM. J Compos Mater 1992; 26(8): 1100–33], gives an excellent fit to these data across the range of /. We perform further simulations to determine the impact of the curvature and aspect ratio of the fibres on the permeability. We find that curvature has a negligible effect, and that aspect ratio is only important for fibres with aspect ratio smaller than 6:1, in which case the permeability increases with increasing aspect ratio. Finally, we calculate the permeability tensor for the fibrous media studied and confirm numerically that, for an isotropic medium, the permeability tensor reduces to a scalar value.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LATTICE BOLTZMANN METHOD FOR FLUID FLOWS
Chen, S., & Doolen, G. D. (1998) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.30.1.329 · Cited by 7,314
Lattice BGK Models for Navier-Stokes Equation
Qian, Y. H., D'Humières, D., & Lallemand, P. (1992) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/17/6/001 · Cited by 5,303
The Lattice Boltzmann Equation for Fluid Dynamics and Beyond
Succi, S. (2001) · doi:10.1093/oso/9780198503989.001.0001 · Cited by 4,188
The Lattice Boltzmann Equation: For Fluid Dynamics and Beyond
Yeomans, J. M. (2001) · Cited by 2,947
Lattice-gas automata for the Navier-Stokes equation
Frisch, U., Hasslacher, B., & Pomeau, Y. (1986) · Physical Review Letters · doi:10.1103/physrevlett.56.1505 · Cited by 2,788
Use of the Boltzmann Equation to Simulate Lattice-Gas Automata
McNamara, G. R., & Zanetti, G. (1988) · Physical Review Letters · doi:10.1103/physrevlett.61.2332 · Cited by 2,079
(2015) · CRC Press eBooks · doi:10.1201/b18614 · Cited by 1,505
Lattice Gas Dynamics with Enhanced Collisions
Higuera, F. J., Succi, S., & Benzi, R. (1989) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/9/4/008 · Cited by 921
Boltzmann Approach to Lattice Gas Simulations
Higuera, F. J., & Jiménez, J. (1989) · Europhysics Letters (EPL) · doi:10.1209/0295-5075/9/7/009 · Cited by 876
An evaluation of lattice Boltzmann schemes for porous medium flow simulation
Pan, C., Luo, L.-S., & Miller, C. T. (2006) · Computers & Fluids · doi:10.1016/j.compfluid.2005.03.008 · Cited by 753
The permeability of fibrous porous media
Jackson, G. W., & James, D. F. (1986) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.5450640302 · Cited by 646
Slow flow past periodic arrays of cylinders with application to heat transfer
Sangani, A. S., & Acrivos, A. (1982) · International Journal of Multiphase Flow · doi:10.1016/0301-9322(82)90029-5 · Cited by 631
HOEF, M. A. V. D., BEETSTRA, R., & KUIPERS, J. A. M. (2005) · Journal of Fluid Mechanics · doi:10.1017/s0022112004003295 · Cited by 515
Permeability and effective porosity of porous media
Koponen, A., Kataja, M., & Timonen, J. (1997) · Physical Review E · doi:10.1103/physreve.56.3319 · Cited by 500
Breuer, M., Bernsdorf, J., Zeiser, T., & Durst, F. (2000) · International Journal of Heat and Fluid Flow · doi:10.1016/s0142-727x(99)00081-8 · Cited by 455
Microscopic flow near the surface of two-dimensional porous media. Part 1. Axial flow
Larson, R. E., & Higdon, J. J. L. (1986) · Journal of Fluid Mechanics · doi:10.1017/s0022112086000228 · Cited by 264
Resin transfer molding of natural fiber reinforced composites: cure simulation
Rouison, D., Sain, M. M., & Couturier, M. F. (2003) · Composites Science and Technology · doi:10.1016/j.compscitech.2003.06.001 · Cited by 244
Djilali, N. (2007) · Energy · doi:10.1016/j.energy.2006.08.007 · Cited by 239
Universal scaling of fluid permeability for sphere packings
Martys, N., Salvatore Torquato, A., & Bentz, D. P. (1994) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.50.403 · Cited by 239
Simulation of capillary-dominated displacements in microtomographic images of reservoir rocks
Hazlett, R. D. (1995) · Transport in Porous Media · doi:10.1007/bf00616924 · Cited by 229
Microscopic flow near the surface of two-dimensional porous media. Part 2. Transverse flow
Larson, R. E., & Higdon, J. J. L. (1987) · Journal of Fluid Mechanics · doi:10.1017/s0022112087001149 · Cited by 198
Modeling of low-density lipoprotein (LDL) transport in the artery—effects of hypertension
Yang, N., & Kambiz Vafai, B. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.09.019 · Cited by 198
A coupling model for macromolecule transport in a stenosed arterial wall
Ai, L., & Kambiz Vafai, B. (2006) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.10.041 · Cited by 197
Simulation of Capillary-Dominated Displacements in Microtomographic Images of Reservoir Rocks
Hazlett, R. D. (1995) · Springer eBooks · doi:10.1007/978-94-017-2372-5_2 · Cited by 172
Pore-scale modeling of saturated permeabilities in random sphere packings
Pan, C., Hilpert, M., & Miller, C. T. (2001) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.64.066702 · Cited by 157
Khanafer, K., & Kambiz Vafai, B. (2006) · Heat and Mass Transfer · doi:10.1007/s00231-006-0142-6 · Cited by 154
Simulation of correlated and uncorrelated packing of random size spheres
Yang, A., Miller, C. T., & Turcoliver, L. D. (1996) · Physical review. E, Statistical physics, plasmas, fluids, and related interdisciplinary topics · doi:10.1103/physreve.53.1516 · Cited by 107
Validation of x-ray microfocus computed tomography as an imaging tool for porous structures
Kerckhofs, G., Schrooten, J., Cleynenbreugel, T. V., Lomov, S. V., & Wevers, M. (2008) · Review of Scientific Instruments · doi:10.1063/1.2838584 · Cited by 98
Modeling and simulation approaches in the resin transfer molding process: A review
Shojaei, A., Ghaffarian, S. R., & Karimian, S. M. H. (2003) · Polymer Composites · doi:10.1002/pc.10050 · Cited by 93
Cited by
Mechanical characterisation of hydrogel materials
Oyen, M. L. (2014) · International Materials Reviews · doi:10.1179/1743280413y.0000000022 · Cited by 635
Pore-scale modeling of complex transport phenomena in porous media
Chen, L., He, A., Zhao, J., Kang, Q., Li, Z.-Y., Carmeliet, J., Shikazono, N., & Tao, W.-Q. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100968 · Cited by 399
Omrani, R., & Shabani, B. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.09.132 · Cited by 245
Metadata
- Authors
- Nabovati, A., Llewellin, E. W., & Sousa, A. C. M.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2009-07
- Volume
- 40
- Issue
- 6-7
- Pages
- 860-869
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2111155378
- Cited by
- 274
- References
- 29
- FWCI
- 11.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.