The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation
Open accessAbstract
Drilling carbon fibre reinforced plastics (CFRPs) is typically cumbersome due to high structural stiffness of the composite and low thermal conductivity of plastics. Resin-rich areas between neighbouring plies in a laminate are prone to drilling-induced delamination that compromises structural integrity. Appropriate selection of drilling parameters is believed to mitigate damage in CFRPs. In this context, we study the effect of cutting parameters on drilling thrust force and torque during the machining process both experimentally and numerically. A unique three-dimensional (3D) finite element model of drilling in a composite laminate, accounting for complex kinematics at the drill-workpiece interface is developed. Cohesive zone elements are used to simulate interply delamination in a composite. Experimental quantification of drilling-induced damage is performed by means of X-ray micro computed tomography. The developed numerical model is shown to agree reasonably well with the experiments. The model is used to predict optimal drilling parameters in carbon/epoxy composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Benzeggagh, M. L., & Kenane, M. (1996) · Composites Science and Technology · doi:10.1016/0266-3538(96)00005-x · Cited by 3,028
A damage model for the simulation of delamination in advanced composites under variable-mode loading
Turon, A., Camanho, P. P., Costa, J., & Dávila, C. G. (2006) · Mechanics of Materials · doi:10.1016/j.mechmat.2005.10.003 · Cited by 985
Chen, W.-C. (1997) · International Journal of Machine Tools and Manufacture · doi:10.1016/s0890-6955(96)00095-8 · Cited by 752
Machining of Composite Materials
Teti, R. (2002) · CIRP Annals · doi:10.1016/s0007-8506(07)61703-x · Cited by 740
DAVIM, J., RUBIO, J., & ABRAO, A. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.10.009 · Cited by 551
Turón, A., Camanho, P. P., Costa, J., et al. (2010) · Composite Structures · doi:10.1016/j.compstruct.2010.01.012 · Cited by 506
Modeling of machining of composite materials: A review
Dandekar, C. R., & Shin, Y. C. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.01.006 · Cited by 457
The path towards delamination-free drilling of composite materials
Hocheng, H., & Tsao, C. C. (2005) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2005.06.039 · Cited by 449
Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
Davim, J. P., Reis, P., & António, C. C. (2004) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00253-7 · Cited by 388
Manufacturing of Polymer Composites
Åström, B. T. (2018) · Routledge eBooks · doi:10.1201/9780203748169 · Cited by 375
Cited by
Giasin, K., Ayvar-Soberanis, S., French, T., & Phadnis, V. (2017) · Applied Composite Materials · doi:10.1007/s10443-016-9517-0 · Cited by 88
Self-citation
Metadata
- Authors
- Phadnis, V. A., Makhdum, F., Roy, A., & Silberschmidt, V. V.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2013-04
- Volume
- 47
- Pages
- 41-51
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2075249150
- Cited by
- 290
- References
- 20
- FWCI
- 19.11
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation. https://app.cochat.ai/papers/10.1016/j.compositesa.2012.11.020
- The paper
- Phadnis, V. A., Makhdum, F., Roy, A., & Silberschmidt, V. V. (2013). Drilling in carbon/epoxy composites: Experimental investigations and finite element implementation. Composites Part A: Applied Science and Manufacturing. https://doi.org/10.1016/j.compositesa.2012.11.020
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.