The DOI matches its Crossref record.
Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition
Abstract
Abstract The present study aims at exploring the influence of nano TiO2 in enhancing the mechanical, thermal and water absorption properties of the flax fibre reinforced epoxy composites. The composites were prepared using the compression moulding technique. Epoxy was modified using nano titanium dioxide (50 nm size) at a loading rate (percentage by weight of the composite) of 0%, 0.5%, 0.7% and 0.9% by mechanical stirring and sonication process. The morphological characterisation was done by Scanning electron microscopy and the structural properties by Fourier transform infrared spectroscopy. The results indicate a significant improvement in strength of the composite system with the addition of TiO2. The optimum weight percentage for maximum performance was obtained as 0.7. The increase in tensile, flexural, impact and interlaminar shear strength values were observed as 10.95%, 20.05%, 10.45% and 18.80% respectively. Water diffusion coefficient was reduced by 31.66% by the addition of nano particles.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Challenges and advancement in water absorption of natural fiber-reinforced polymer composites
Mohammed, M., Jawad, A. J. M., Mohammed, A. M., Oleiwi, J. K., Adam, T., Osman, A. F., Dahham, O. S., Betar, B. O., Gopinath, S. C. B., & Jaafar, M. (2023) · Polymer Testing · doi:10.1016/j.polymertesting.2023.108083 · Cited by 418
Development and characterisation of sugarcane bagasse nanocellulose/PLA composites
Gond, R. K., Naik, T. P., Gupta, M. K., & Singh, I. (2022) · Materials Technology · doi:10.1080/10667857.2022.2088616 · Cited by 30
Metadata
- Authors
- Prasad, V., Joseph, M. A., & Sekar, K.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 115
- Pages
- 360-370
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2895372665
- Cited by
- 161
- References
- 0
- FWCI
- 5.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition. https://app.cochat.ai/papers/10.1016/j.compositesa.2018.09.031
- The paper
- Prasad, V., Joseph, M. A., & Sekar, K. (2018). Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition. Composites Part A: Applied Science and Manufacturing. https://doi.org/10.1016/j.compositesa.2018.09.031
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.