The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Improved thermal conductivity of thermoplastic polyurethane via aligned boron nitride platelets assisted by 3D printing
Abstract
Abstract Thermal management is of importance to microelectronics. Owning both excellent thermal conduction and electrical insulation, hexagonal boron nitride (hBN) platelets are widely used in polymer matrices. While the thermal properties rely on the orientation of hBN platelets in polymer matrices significantly. Herein, we report that high thermal conductive hBN filled thermoplastic polyurethane (TPU) composites can be achieved by a fused deposition modeling 3D printing technique. The hBN platelets show excellent alignment along printing direction in TPU matrix due to the shear-inducing effect of printing. The sample along printing direction at filler loading of 25.9 vol% (40 wt%) exhibits the thermal conductivity up to 2.56 Wm−1 K−1 at 100 °C along printing direction, i.e. 10- and 2.8-time enhancement, compared to those of neat TPU and hBN/TPU sample tested along thickness direction. The surface temperature distribution of samples with various heating durations is also presented. The effects of some key parameters, i.e. nozzle diameter, printing speed as well as filler loading, on the alignment level of hBN are also investigated. Finally, the alignment level of the platelets is predicted by effective medium approximation, which is consistent with that measured by small angle X-ray scattering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
Cited by
Structure, Properties and Applications of Two‐Dimensional Hexagonal Boron Nitride
Roy, S., Zhang, X., Puthirath, A. B., Meiyazhagan, A., Bhattacharyya, S., Rahman, M. M., Babu, G., Susarla, S., Saju, S. K., Tran, M. K., et al. (2021) · Advanced Materials · doi:10.1002/adma.202101589 · Cited by 871
Factors affecting thermal conductivities of the polymers and polymer composites: A review
Guo, Y., Ruan, K., Shi, X., Yang, X., & Gu, J. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2020.108134 · Cited by 865
Self-citationA review of additive manufacturing of metamaterials and developing trends
Fan, J., Zhang, L., Wei, S., Zhang, Z., Choi, S.-K., Song, B., & Shi, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.019 · Cited by 440
Self-citationWang, Z., Wu, Z., Weng, L., Ge, S., Jiang, D., Huang, M., Mulvihill, D. M., Chen, Q., Guo, Z., Jazzar, A., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202301549 · Cited by 419
Advances in 3D printing for polymer composites: A review
Ma, T., Zhang, Y., Ruan, K., Guo, H., He, M., Shi, X., Guo, Y., Kong, J., & Gu, J. (2024) · InfoMat · doi:10.1002/inf2.12568 · Cited by 310
Self-citation
Metadata
- Authors
- Liu, J., Li, W., Guo, Y., Zhang, H., & Zhang, Z.
- Venue
- Composites Part A: Applied Science and Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 120
- Pages
- 140-146
- ISSN
- 1359-835X (ISSN-L)
- OpenAlex
- W2915186264
- Cited by
- 196
- References
- 1
- FWCI
- 7.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.