The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Design methodology for porous composites with tunable thermal expansion produced by multi-material topology optimization and additive manufacturing
Open accessAbstract
Abstract To realize negative thermal expansion (NTE), porous composites made of two materials with different coefficients of thermal expansion are being actively researched. NTE can be realized by taking advantage of the thermal deformation mechanisms of a composite material's internal geometry. However, in addition to negative thermal expansion, materials with anisotropic and large positive thermal expansion are also desirable for various applications. Also, additive manufacturing provides new ways to fabricate composites by layering multiple materials at arbitrary points in three-dimensional space. In this study, we developed a design methodology for porous composites, which showed defined thermal expansion characteristics, including negative and positive thermal expansion as well as isotropic and anisotropic thermal expansion. Our approach was tested based on the fabrication of a multi-material photopolymer by additive manufacturing. The internal geometries required to produce such characteristics were designed by topology optimization, which is the most effective structural optimization method for realizing macroscopic inward deformation and for maintaining stiffness. The designed structures were converted to three-dimensional models and fabricated by multi-material photopolymer additive manufacturing. Using laser scanning dilatometry, we measured the thermal expansion of these specimens, revealing well-ordered thermal expansion, from anisotropic positive thermal expansion to anisotropic negative thermal expansion, over a wide range of about −3 × 10−4 K−1 to 1 × 10−3 K−1.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Cited by
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Current and future trends in topology optimization for additive manufacturing
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018) · Structural and Multidisciplinary Optimization · doi:10.1007/s00158-018-1994-3 · Cited by 870
Self-citationHa, C. S., Yao, D., Xu, Z., Liu, C., Liu, H., Elkins, D., Kile, M., Deshpande, V., Kong, Z., Bauchy, M., et al. (2023) · Nature Communications · doi:10.1038/s41467-023-40854-1 · Cited by 387
Advances in 3D/4D printing of mechanical metamaterials: From manufacturing to applications
Zhou, X., Ren, L., Song, Z., Li, G., Zhang, J., Li, B., Wu, Q., Li, W., Ren, L., & Liu, Q. (2023) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2023.110585 · Cited by 277
A review on 3D printed matrix polymer composites: its potential and future challenges
Saroia, J., Wang, Y., Wei, Q., Lei, M., Li, X., Guo, Y., & Zhang, K. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-04534-z · Cited by 253
Metadata
- Authors
- Takezawa, A., & Kobashi, M.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2017-12
- Volume
- 131
- Pages
- 21-29
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2741250353
- Cited by
- 169
- References
- 1
- FWCI
- 9.92
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.