The DOI matches its Crossref record; 24 of the 24 references it cites were found in a registry or an index.
Multifunctional application of carbon fiber reinforced polymer composites: Electrical properties of the reinforcing carbon fibers – A short review
Abstract
In most areas where weight reduction is crucial, carbon fiber reinforced composites (CFRPs) are an excellent choice. Carbon fiber, besides its structural role, can be applied for several secondary functions as well, based on its electrical properties; for example, it can be used for crosslinking, welding, as a sensor and it can also facilitate self-healing. By merging these functions, a multifunctional part or structure can be created. In this article, we review multifunctional application examples of reinforcing carbon fiber. The focus is on utilization: which additional function and what physical layout can be used with CFRP. In a summarizing table (Table 1), we classified the presented examples according to their secondary function, the material used and the physical layout. With the combination of different functions, important materials can be created for the energy and transportation industry, for autonomous vehicles and for Industry 4.0.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A review of heat treatment on polyacrylonitrile fiber
Rahaman, M. S. A., Ismail, A. F., & Mustafa, A. (2007) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2007.03.023 · Cited by 1,412
Carbon Fibers and Their Composites
Morgan, P. (2005) · CRC Press eBooks · doi:10.1201/9781420028744 · Cited by 1,038
Physics for Scientists and Engineers with Modern Physics
Serway, R. A., & Kirkpatrick, L. D. (1988) · The Physics Teacher · doi:10.1119/1.2342517 · Cited by 902
Bergman, S. D., & Wudl, F. (2008) · J. Mater. Chem. · doi:10.1039/b713953p · Cited by 652
The effect of processing on the structure and properties of carbon fibers
Edie, D. D. (1998) · Carbon · doi:10.1016/s0008-6223(97)00185-1 · Cited by 617
Load and failure analyses of CFRP laminates by means of electrical resistivity measurements
Schulte, K., & Baron, C. (1989) · Composites Science and Technology · doi:10.1016/0266-3538(89)90016-x · Cited by 478
Lightning strike protection of composites
Gagné, M., & Therriault, D. (2014) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2013.07.002 · Cited by 378
Multifunctional Material Systems: A state-of-the-art review
Ferreira, A. D. B. L., Nóvoa, P. R. O., & Marques, A. T. (2016) · Composite Structures · doi:10.1016/j.compstruct.2016.01.028 · Cited by 327
Electrical applications of carbon materials
Chung, D. D. L. (2004) · Journal of Materials Science · doi:10.1023/b:jmsc.0000021439.18202.ea · Cited by 314
The heating of polymer composites by electromagnetic induction – A review
Bayerl, T., Duhovic, M., Mitschang, P., & Bhattacharyya, D. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2013.10.024 · Cited by 313
Effect of fibre microstructure upon the modulus of PAN- and pitch-based carbon fibres
Huang, Y. C., & Young, R. J. (1995) · Carbon · doi:10.1016/0008-6223(94)00109-d · Cited by 241
Curing Methods for Advanced Polymer Composites - A Review
Abliz, D., Duan, Y., Steuernagel, L., Xie, L., Li, D., & Ziegmann, G. (2013) · Polymers and Polymer Composites · doi:10.1177/096739111302100602 · Cited by 204
Emmerich, F. G. (2014) · Carbon · doi:10.1016/j.carbon.2014.07.068 · Cited by 164
Programmable morphing composites with embedded continuous fibers by 4D printing
Wang, Q., Tian, X., Huang, L., Li, D., Malakhov, A. V., & Полилов, А. Н. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.06.027 · Cited by 157
Towards Development of a Self-Healing Composite using a Mendable Polymer and Resistive Heating
Park, J. S., Takahashi, K., Guo, Z., Wang, Y., Bolanos, E., Schaffner-Hamann, C., Murphy, E. B., Wudl, F., & Hahn, H. T. (2008) · Journal of Composite Materials · doi:10.1177/0021998308097280 · Cited by 127
Tallman, T. N., Güngör, S., Wang, K., & Bakis, C. E. (2014) · Structural Health Monitoring · doi:10.1177/1475921714554142 · Cited by 90
Healing behavior of a matrix crack on a carbon fiber/mendomer composite
Park, J. S., Kim, H., & Hahn, H. T. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.01.031 · Cited by 87
Gallo, G. J., & Thostenson, E. T. (2015) · Materials Today Communications · doi:10.1016/j.mtcomm.2015.01.009 · Cited by 87
Electrical properties of single carbon fibres
Owston, C. N. (1970) · Journal of Physics D Applied Physics · doi:10.1088/0022-3727/3/11/309 · Cited by 75
Self-healing properties of carbon nanotube filled natural rubber/bromobutyl rubber blends
Le, H. H., Hait, S., Das, A., Wießner, S., Stöckelhuber, K. W., Boehme, F., Reuter, U., Naskar, K., Heinrich, G., & Radusch, H. J. (2017) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2017.24 · Cited by 71
On the electrical properties of multi scale reinforced composites for damage accumulation monitoring
Grammatikos, S., & Paipetis, A. S. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.01.077 · Cited by 70
Gong, X., Liu, L., Liu, Y., & Leng, J. (2016) · Smart Materials and Structures · doi:10.1088/0964-1726/25/3/035036 · Cited by 65
Grammatikos, S., Kordatos, E. Z., Matikas, T. E., David, C., & Paipetis, A. S. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.09.019 · Cited by 47
Measuring the Electrical Conductivity of Single Fibres
Rebouillat, S., & Lyons, M. E. G. (2011) · International Journal of Electrochemical Science · doi:10.1016/s1452-3981(23)18440-9 · Cited by 25
Cited by
Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications
Rajak, D., Pagar, D., Menezes, P., & Linul, E. (2019) · Polymers · doi:10.3390/polym11101667 · Cited by 1,706
Recent progress of reinforcement materials: a comprehensive overview of composite materials
Rajak, D. K., Pagar, D. D., Kumar, R., & Pruncu, C. I. (2019) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2019.09.068 · Cited by 883
Hassan, M. F., Sabri, M. A., Fazal, H., Hafeez, A., Shezad, N., & Hussain, M. (2020) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2019.104715 · Cited by 305
Dai, L., Hu, X., Zhao, C., Zhou, H., Zhang, Z., Wang, Y., Ma, S., Liu, X., Li, X., & Shu, X. (2024) · Waste Management · doi:10.1016/j.wasman.2024.09.002 · Cited by 16
Metadata
- Authors
- Forintos, N., & Czigany, T.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 162
- Pages
- 331-343
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2899397058
- Cited by
- 487
- References
- 24
- FWCI
- 20.95
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.