The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification
Abstract
Abstract This work deals with provision and characterization of the biopolymer-based composites achieved by incorporation of cellulose fibers as the reinforcement within the glycerol plasticized matrix formed by thermoplastic cornstarch biopolymer. The function of starch-based polymers is limited due to poor mechanical properties. However, it is improved with forming a biocomposite of thermoplastic starch (TPS) as matrix and the cellulose fibers (CF) as reinforcement. The surface of cellulose fibers is successfully modified using the air plasma treatment with the aim of improving the matrix/fiber adhesion. The modified fibers are studied using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The TPS/CF composites are prepared using high friction and hot compression procedure. Tensile test results and SEM images of the fracture surfaces show significant improvement of adhesion between treated cellulose fibers and TPS matrix. Thermogravimetric analysis shows a considerable decomposition at approximately 250–350 °C. XRD proved the significant increase in crystallinity percentage of composites compared to TPS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Hahladakis, J. N., Velis, C. A., Weber, R., Iacovidou, E., & Purnell, P. (2018) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2017.10.014 · Cited by 3,873
Cited by
Vinod, A., Sanjay, M. R., Suchart, S., & Jyotishkumar, P. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.120978 · Cited by 828
Biopolymer composites: a review
Aaliya, B., Sunooj, K. V., & Lackner, M. (2021) · International Journal of Biobased Plastics · doi:10.1080/24759651.2021.1881214 · Cited by 298
Ilyas, R., Zuhri, M., Norrrahim, M., Misenan, M., Jenol, M., Samsudin, S., Nurazzi, N., Asyraf, M., Supian, A., Bangar, S., et al. (2022) · Polymers · doi:10.3390/polym14010182 · Cited by 268
Recent progresses of fabrication and characterization of fibers-reinforced composites: A review
Yang, G., Park, M., & Park, S.-J. (2019) · Composites Communications · doi:10.1016/j.coco.2019.05.004 · Cited by 266
Metadata
- Authors
- Fazeli, M., Florez, J. P., & Simão, R. A.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-04
- Volume
- 163
- Pages
- 207-216
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2899639594
- Cited by
- 243
- References
- 1
- FWCI
- 10.34
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification. https://app.cochat.ai/papers/10.1016/j.compositesb.2018.11.048
- The paper
- Fazeli, M., Florez, J. P., & Simão, R. A. (2019). Improvement in adhesion of cellulose fibers to the thermoplastic starch matrix by plasma treatment modification. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2018.11.048
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.