Influence of ultrasonication on the dispersion and enhancing effect of graphene oxide–carbon nanotube hybrid nanoreinforcement in cementitious composite
Open accessThe DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.
Abstract
Abstract Nano-engineering cement binder using a hybrid of carbon nanotubes (CNTs) and graphene oxide (GO) combines the superior mechanical properties of CNTs and the good dispersibility and affinity of GO. Ultrasonication is a key process implemented in the dispersion of CNTs and GO. The present study characterizes the effect of ultrasonication on the dispersion and size of the GO/CNT particles by using an ultraviolet spectrophotometer and Zetasizer μV detector, respectively. The mechanical properties of GO/CNT-OPC pastes treated with different ultrasonication time and power levels were tested and their microstructure was investigated using scanning electron microscopy and mercury intrusion porosimetry. The results of this study not only reveal that differences in ultrasonication can cause the mechanical properties of the GO/CNT-OPC composite to vary by −11.7–78.8% but also show that the effect of the amount of ultrasonication energy can vary significantly when different ultrasonication time or power levels are adopted. The porosity of the composite is found to have a nonlinear correlation with the ultrasonication. The findings of this study can promote understanding of GO/CNT-OPC composites and help to guide the implementation of ultrasonication in the future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Helical microtubules of graphitic carbon
Iijima, S. (1991) · Nature · doi:10.1038/354056a0 · Cited by 43,098
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Improved Synthesis of Graphene Oxide
Marcano, D. C., Kosynkin, D. V., Berlin, J. M., Sinitskii, A., Sun, Z., Slesarev, A., Alemany, L. B., Lu, W., & Tour, J. M. (2010) · ACS Nano · doi:10.1021/nn1006368 · Cited by 11,989
Graphene and Graphene Oxide: Synthesis, Properties, and Applications
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J. W., Potts, J. R., & Ruoff, R. S. (2010) · Advanced Materials · doi:10.1002/adma.201001068 · Cited by 10,522
Processable aqueous dispersions of graphene nanosheets
Li, D., Müller, M. B., Gilje, S., Kaner, R. B., & Wallace, G. G. (2008) · Nature Nanotechnology · doi:10.1038/nnano.2007.451 · Cited by 9,114
Strength and Breaking Mechanism of Multiwalled Carbon Nanotubes Under Tensile Load
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., & Ruoff, R. S. (2000) · Science · doi:10.1126/science.287.5453.637 · Cited by 5,310
Raman Spectra of Graphite Oxide and Functionalized Graphene Sheets
Kudin, K. N., Ozbas, B., Schniepp, H. C., Prud'homme, R. K., Aksay, I. A., & Car, R. (2008) · Nano Letters · doi:10.1021/nl071822y · Cited by 4,475
Electrical conductivity of individual carbon nanotubes
Ebbesen, T. W., Lezec, H. J., Hiura, H., Bennett, J. W., Ghaemi, H. F., & Thio, T. (1996) · Nature · doi:10.1038/382054a0 · Cited by 2,642
Mechanical and thermal properties of carbon nanotubes
Ruoff, R. S., & Lorents, D. C. (1995) · Carbon · doi:10.1016/0008-6223(95)00021-5 · Cited by 1,387
(1985) · Materials and Structures · doi:10.1007/bf02472918 · Cited by 999
Cited by
Chen, L., & Tang, Y. (2026) · Structural Concrete · doi:10.1002/suco.70305 · Cited by 2
“In 30 – 32 As a result, the uneven dispersion of CNTs greatly limits the enhancement effects that they can have on RPC. 33 – 36 Due to its high hardness, toughness, and ferromagnetic properties, metallic nickel is an ideal choice for coating CNTs. 37 A second phase of nickel coating can be directly…”
Metadata
- Authors
- Gao, Y., Jing, H. W., Chen, S. J., Du, M. R., Chen, W. Q., & Duan, W. H.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 164
- Pages
- 45-53
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2901367002
- Cited by
- 204
- References
- 41
- FWCI
- 13.47
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.