The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Structural vibration-based classification and prediction of delamination in smart composite laminates using deep learning neural network
Abstract
This paper proposes a Convolutional Neural Network (CNN) based approach for the classification and prediction of various types of in-plane and through-the-thickness delamination in smart composite laminates using low-frequency structural vibration outputs. An electromechanically coupled mathematical model is developed for the healthy and delaminated smart composite laminates, and their structural vibration responses are obtained in the time domain. Short Time Fourier Transform (STFT) is employed to transform the transient responses into two-dimensional spectral frame representation. A convolutional neural network is incorporated to distinguish between the damaged and undamaged states, as well as various types of damage of the laminated composites, by automatically extracting discriminative features from the vibration-based spectrograms. The CNN showed a classification accuracy of 90.1% on one healthy and 12 delaminated cases. The study of the confusion matrix of CNN provided further insights into the physics of the problem. The predictive performance of a pre-trained CNN classifier was also evaluated on unseen cases of delamination, and physically consistent results were obtained.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
LeCun, Y., Bengio, Y., & Hinton, G. (2015) · Nature · doi:10.1038/nature14539 · Cited by 84,126
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
Los Alamos National Lab., N. (. S., Doebling, S., USDOE, W., Farrar, C., Prime, M., & Shevitz, D. (1996) · doi:10.2172/249299 · Cited by 2,899
Detection of structural damage through changes in frequency: a review
Salawu, O. S. (1997) · Engineering Structures · doi:10.1016/s0141-0296(96)00149-6 · Cited by 2,080
Research works printed but not linked: 30
- Mouritz, 2001, Review of advanced composite structures for naval ships and submarines, Compos Struct, 53, 21, 10.1016/S0263-8223(00)00175-6 · DOI · Paper page
- Chróścielewski, 2017, A novel sandwich footbridge-Practical application of laminated composites in bridge design and in situ measurements of static response, Compos B Eng, 126, 153, 10.1016/j.compositesb.2017.06.009 · doi:10.1016/j.compositesb.2017.06.009
- Balakrishnan, 2018, Potential repair techniques for automotive composites: a review, Compos B Eng, 145, 28, 10.1016/j.compositesb.2018.03.016 · DOI
- Azouaoui, 2010, Evaluation of impact fatigue damage in glass/epoxy composite laminate, Int J Fatig, 32, 443, 10.1016/j.ijfatigue.2009.09.005 · doi:10.1016/j.ijfatigue.2009.09.005
- Zhang, 2018, Vibration-based assessment of delaminations in FRP composite plates, Compos B Eng, 144, 254, 10.1016/j.compositesb.2018.03.003 · DOI
- Mehdikhani, 2018, Multi-scale digital image correlation for detection and quantification of matrix cracks in carbon fiber composite laminates in the absence and presence of voids controlled by the cure cycle, Compos B Eng, 154, 138, 10.1016/j.compositesb.2018.07.006 · doi:10.1016/j.compositesb.2018.07.006
- Wisnom, 2012, The role of delamination in failure of fibre-reinforced composites, Phil. Trans. R Soc. A, 370, 1850, 10.1098/rsta.2011.0441 · doi:10.1098/rsta.2011.0441
- Chattopadhyay, 2000, A higher order plate theory for dynamic stability analysis of delaminated composite plates, Comput Mech, 26, 302, 10.1007/s004660000174 · doi:10.1007/s004660000174
- İpek, 2018, The effect of delamination size and location to buckling behavior of composite materials, Compos B Eng, 155, 69, 10.1016/j.compositesb.2018.08.009 · doi:10.1016/j.compositesb.2018.08.009
- Liu, 2012, Structural health monitoring: state of the art and perspectives, JOM (J Occup Med), 64, 789
- Montalvao, 2006, A review of vibration-based structural health monitoring with special emphasis on composite materials, Shock Vib Digest, 38, 295, 10.1177/0583102406065898 · DOI · Paper page
- Huang, 2015, Frequency response analysis of a delaminated smart composite plate, J Intell Mater Syst Struct, 26, 1091, 10.1177/1045389X14544141 · doi:10.1177/1045389x14544141
- Kyriazoglou, 2004, Vibration damping for crack detection in composite laminates, Compos Appl Sci Manuf, 35, 945, 10.1016/j.compositesa.2004.01.003 · DOI
- Qiao, 2007, Curvature mode shape-based damage detection in composite laminated plates, Compos Struct, 80, 409, 10.1016/j.compstruct.2006.05.026 · DOI · Paper page
- Huang, 2014, Transient analysis of Biocomposite laminates with delamination, J Nanosci Nanotechnol, 14, 7432, 10.1166/jnn.2014.9556 · doi:10.1166/jnn.2014.9556
- Pan, 2019, A novel method of vibration modes selection for improving accuracy of frequency-based damage detection, Compos B Eng, 159, 437, 10.1016/j.compositesb.2018.08.134 · DOI
- Dib, 2017, Ensembles of novelty detection classifiers for structural health monitoring using guided waves, Smart Mater Struct, 27, 10.1088/1361-665X/aa973f · doi:10.1088/1361-665x/aa973f
- Mitra, 2016, Guided wave based structural health monitoring: a review, Smart Mater Struct, 25, 10.1088/0964-1726/25/5/053001 · DOI · Paper page
- Saeedifar, 2018, Clustering of interlaminar and intralaminar damages in laminated composites under indentation loading using Acoustic Emission, Compos B Eng, 144, 206, 10.1016/j.compositesb.2018.02.028 · DOI
- Minak, 2010, Localization of a delamination and estimation of its length in a composite laminate beam by the VSHM and pattern recognition methods, Mech Compos Mater, 46, 387, 10.1007/s11029-010-9155-9 · DOI
- Yang, 2017, Damage localization and identification in WGF/epoxy composite laminates by using Lamb waves: experiment and simulation, Compos Struct, 165, 138, 10.1016/j.compstruct.2017.01.015 · DOI
- Prasad, 2004, Structural health monitoring of composite structures using Lamb wave tomography, Smart Mater Struct, 13, N73, 10.1088/0964-1726/13/5/N01 · doi:10.1088/0964-1726/13/5/n01
- Kim, 2003, Dynamic analysis of composite laminates with multiple delamination using improved layerwise theory, AIAA J, 41, 1771, 10.2514/2.7295 · doi:10.2514/2.7295
- Kim, 2002, Interlaminar stress analysis of shell structures with piezoelectric patch including thermal loading, AIAA J, 40, 2517, 10.2514/2.1596 · doi:10.2514/2.1596
- Kim, 2003, Characterization of delamination effect on composite laminates using a new generalized layerwise approach, Comput Struct, 81, 1555, 10.1016/S0045-7949(03)00150-0 · doi:10.1016/s0045-7949(03)00150-0
- Huang, 2014, PCA-based damage classification of delaminated smart composite structures using improved layerwise theory, Comput Struct, 141, 26, 10.1016/j.compstruc.2014.05.011 · DOI
- Worden, 2007, The fundamental axioms of structural health monitoring, Proc. Royal Soc. Lond. A: Math. Phys. Eng. Sci., 1639
- Tamilselvan, 2013, Failure diagnosis using deep belief learning based health state classification, Reliab Eng Syst Saf, 115, 124, 10.1016/j.ress.2013.02.022 · DOI · Paper page
- Gan, 2016, Construction of hierarchical diagnosis network based on deep learning and its application in the fault pattern recognition of rolling element bearings, Mech Syst Signal Process, 72, 92, 10.1016/j.ymssp.2015.11.014 · DOI · Paper page
- Bao, 2018, Computer vision and deep learning–based data anomaly detection method for structural health monitoring, Struct Health Monit
Cited by
A review of artificial neural networks in the constitutive modeling of composite materials
Liu, X., Tian, S., Tao, F., & Yu, W. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109152 · Cited by 475
Sattarifar, A., & Nestorović, T. (2022) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2022.105273 · Cited by 46
Hassani, S., Mousavi, M., & Gandomi, A. H. (2022) · Composite Structures · doi:10.1016/j.compstruct.2022.115243 · Cited by 31
Mohammed, B. (2026) · Sensor Review · doi:10.1108/sr-10-2025-0822 · Cited by 3
Metadata
- Authors
- Khan, A., Ko, D.-K., Lim, S. C., & Kim, H. S.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-03
- Volume
- 161
- Pages
- 586-594
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2907510400
- Cited by
- 225
- References
- 4
- FWCI
- 13.92
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.elsevier.com/tdm/userlicense/1.0/ (tdm)
- www.elsevier.com/legal/tdmrep-license (tdm)
- Funders
- National Research Foundation of Korea (NRF- 2017R1D1A1B03028368)
- Ministry of Education
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.