The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Mechanical characterization of intralaminar natural fibre-reinforced hybrid composites
Abstract
Abstract The main objective of this work was to investigate the effect of hybridization and the effect of chemical treatments on the mechanical properties of a novel intralaminar natural fibre hybrid composite. Jute, sisal and curaua fibres were selected as natural fibre reinforcements for the epoxy matrix based composites which were produced by hand lay-up technique. The total volumetric fraction used in the fabrication of the hybrid composites was 30% of fibres and 70% of epoxy resin. Tensile, flexural and impact tests were carried out according to ASTM standards to characterize the novel hybrid composites. It was found that the mechanical properties evaluated are significantly improved by addition of the natural fibres to pure jute based composites. The fibre treatments had different effects on the mechanical properties of the hybrid composites. For sisal reinforced hybrid composites, the alkaline treatment had a positive impact on the composite properties (tensile, flexural and impact), while for the jute + curaua hybrid composites the alkali treatment had a negative effect on the tensile and impact properties. The mixed (alkalization + silanization) treatment had a positive effect on the jute + curaua flexural properties, while decreased the flexural properties for the jute + sisal composite. A scanning electron microscopy (SEM) was used to examine the fracture surface of the tested specimens.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
JOHN, M., & THOMAS, S. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2007.05.040 · Cited by 2,453
Cited by
Syduzzaman, M., Al Faruque, M. A., Bilisik, K., & Naebe, M. (2020) · Coatings · doi:10.3390/coatings10100973 · Cited by 282
Jagadeesh, P., Puttegowda, M., Mavinkere Rangappa, S., & Siengchin, S. (2021) · Polymer Composites · doi:10.1002/pc.26312 · Cited by 281
Metadata
- Authors
- Cavalcanti, D. K. K., Banea, M. D., Neto, J. S. S., Lima, R. A. A., da Silva, L. F. M., & Carbas, R. J. C.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 175
- Pages
- 107149
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2955929856
- Cited by
- 238
- References
- 1
- FWCI
- 10.83
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical characterization of intralaminar natural fibre-reinforced hybrid composites. https://app.cochat.ai/papers/10.1016/j.compositesb.2019.107149
- The paper
- Cavalcanti, D. K. K., Banea, M. D., Neto, J. S. S., Lima, R. A. A., da Silva, L. F. M., & Carbas, R. J. C. (2019). Mechanical characterization of intralaminar natural fibre-reinforced hybrid composites. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2019.107149
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
