The DOI matches its Crossref record.
Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression
Abstract
Abstract Hierarchical structural design was considered as a promising approach to improve the performance of regular cellular materials. In this study, square hierarchical honeycombs (SHHs) were fabricated by employing a commercial 3D printer, and their in-plane mechanical properties and energy absorption were investigated. The SHHs were constructed by replacing each solid cell wall of a regular square honeycomb (RSH) with different numbers of smaller square substructures. In-plane quasi-static compressive tests were conducted on SHHs, and the effect of substructure number on the deformation mode, mechanical properties and energy absorption performance were studied. The results revealed that the cells of SHHs and RSH collapsed layer-by-layer along the loading direction, while more localized bands and damage were found for SHHs. Enhanced compressive strength, specific energy absorption and crush force efficiency were found for SHHs when compared with RSH of equal mass. Moreover, the reason for the enhancement and the effect of substructure number on the enhancement were also explored. In addition, analytical expressions for the Young's modulus and compressive strength of SHHs were developed, and the results from experiments and simulations were employed to verify the analytical results. This study elucidates the effect of structural hierarchy on the mechanical properties and energy absorption performance of regular cellular materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Nanomaterial Patterning in 3D Printing
Elder, B., Neupane, R., Tokita, E., Ghosh, U., Hales, S., & Kong, Y. L. (2020) · Advanced Materials · doi:10.1002/adma.201907142 · Cited by 265
The Possibility to Use Pine Timber Pieces with Small Size in the Production of Glulam Beams
Dziurka, D., Kawalerczyk, J., Walkiewicz, J., Derkowski, A., & Mirski, R. (2022) · Materials · doi:10.3390/ma15093154 · Cited by 7
Metadata
- Authors
- Tao, Y., Li, W., Wei, K., Duan, S., Wen, W., Chen, L., Pei, Y., & Fang, D.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 176
- Pages
- 107219
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W2962968246
- Cited by
- 163
- References
- 0
- FWCI
- 7.68
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression. https://app.cochat.ai/papers/10.1016/j.compositesb.2019.107219
- The paper
- Tao, Y., Li, W., Wei, K., Duan, S., Wen, W., Chen, L., Pei, Y., & Fang, D. (2019). Mechanical properties and energy absorption of 3D printed square hierarchical honeycombs under in-plane axial compression. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2019.107219
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.