Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract By harnessing the benefits from both construction and demolition waste recycling and geopolymer binders, geopolymeric recycled aggregate concrete (GRAC) can contribute to the green and eco-friendly construction material products. In this study, the compressive behavior of GRAC based on fly ash and slag was experimentally investigated under both quasi-static and dynamic loadings. Quasi-static compressive tests were performed by using a high-force servo-hydraulic test system, while dynamic compressive tests were carried out by using a O80-mm split Hopkinson pressure bar (SHPB) apparatus. The compressive properties of GRAC under dynamic loading, including stress-strain curves, energy absorption capability, and failure modes were obtained and compared with those under quasi-static loading. The results show that the compressive properties of GRAC exhibit a strong strain rate dependency. Although the recycled aggregate replacement decreases the quasi-static compressive strength, it exhibits a slight effect on the compressive strength at high strain rates. The dynamic increase factor (DIF) for compressive strength exhibits an significant increasing trend with the recycled aggregate replacement. On the other hand, the incorporation of slag increases the quasi-static compressive strength, dynamic compressive strength, and DIF. As for the energy absorption capacity, a minor enhancement is achieved with the recycled aggregate replacement, while a significant improvement is identified after the inclusion of slag. Empirical DIF formulae for compressive strength of GRAC are proposed, in which the DIF increases approximately linearly with the strain rate in a logarithmic manner.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effects of nanoparticle on the dynamic behaviors of recycled aggregate concrete under impact loading
Li, W., Luo, Z., Long, C., Wu, C., Duan, W. H., & Shah, S. P. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.045 · Cited by 180
Self-citationPrediction model on compressive strength of recycled aggregate concrete filled steel tube columns
Nour, A. I., & Güneyisi, E. M. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.106938 · Cited by 93
Cited by
Zhang, L. V., Marani, A., & Nehdi, M. L. (2022) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.126103 · Cited by 119
Metadata
- Authors
- Tang, Z., Li, W., Tam, V. W. Y., & Luo, Z.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-03
- Volume
- 185
- Pages
- 107776
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3001632248
- Cited by
- 159
- References
- 2
- FWCI
- 13.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.