The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Experimental study on flexural behavior of damaged reinforced concrete (RC) beam strengthened by toughness-improved ultra-high performance concrete (UHPC) layer
Abstract
The flexural test was conducted to investigate crack resistance, loading bearing capacity, deformation characteristics and failure modes of damaged reinforced concrete (RC) beams strengthened by reinforced ultra-high performance concrete (UHPC) layer (Abbreviated as UC). Also, their mechanical properties were compared with those of the unstrengthened RC beam (Abbreviated as I–C). Additionally, the effects of pre-damage degrees in the RC beams and three strategies for the improvement of toughness of the reinforced UHPC layer on the cracking and flexural performance of UC were discussed. The results showed that UC acted monolithically under flexure without interfacial debonding before typically flexural failure. Compared with I–C, cracking and ultimate loads of UC increased by 1.57–3.32 times and 1.72–2.21 times, respectively. The reinforced UHPC layer effectively suppressed the cracking of the RC beam, making crack width in the RC beam propagate slowly with the load. Moreover, the severer the pre-damage degree of the RC beam, the smaller improvement of the flexural performance of UC. The addition of steel wire mesh, orientation of steel fibers and moderate-temperature steam curing further improved the cracking and flexural performance of UC with the most evident improvement in the addition of steel wire mesh. Finally, the theoretical model and formula were proposed for the calculation of load bearing capacity of UC with consideration of the influence of the pre-damage degrees in the RC beams, and the experimental results verified that the theoretical formula can accurately predict the load bearing capacity of UC.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wu, Z., Shi, C., & Khayat, K. H. (2019) · Composites Part B Engineering · doi:10.1016/j.compositesb.2019.107021 · Cited by 454
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Utilization of fibers in ultra-high performance concrete: A review
Gong, J., Ma, Y., Fu, J., Hu, J., Ouyang, X., Zhang, Z., & Wang, H. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109995 · Cited by 360
Sharma, R., Jang, J. G., & Bansal, P. P. (2022) · Journal of Building Engineering · doi:10.1016/j.jobe.2021.103314 · Cited by 181
Metadata
- Authors
- Zhang, Y., Li, X., Zhu, Y., & Shao, X.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-04
- Volume
- 186
- Pages
- 107834
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3004095395
- Cited by
- 206
- References
- 1
- FWCI
- 11.97
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.