The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
4D printed electro-induced continuous carbon fiber reinforced shape memory polymer composites with excellent bending resistance
Abstract
Abstract Four-dimensional (4D) printing technology of continuous carbon fiber reinforced shape memory polymer composites is a potential manufacturing process for lightweight and high-strength intelligent composite structures. In this study, a 3D printer with dual feed channels based on the fused deposition modeling (FDM) was designed to fabricate continuous carbon fiber reinforced shape memory poly(lactic acid)-based composites (CFRSMPC). The impact of various printing parameters on the bending strength and flexural modulus of 4D printed CFRSMPC was evaluated by the three-point bending test. Meanwhile, mathematical prediction models of bending strength and modulus based on the existing experimental data were established. The electro-induced shape memory effect of 4D printed CFRSMPC was investigated by the electric heating shape recovery test. The shape recovery rate of the specimens was more than 95%, indicating that the resistance heating method is stable and feasible. The quantitative effect of bending angle and temperature on the resistance of CFRSMPC during the programming and recovery process was further investigated. The results demonstrated that the real-time deformation of the CFRSMPC could be monitored by the resistance measurement method. It can be concluded that the CFRSMPC fabricated using the 4D printing method can serve as potential building blocks for electrically activated and deployable structures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
3D Printed Photoresponsive Devices Based on Shape Memory Composites
Yang, H., Leow, W. R., Wang, T., Wang, J., Yu, J., He, K., Qi, D., Wan, C., & Chen, X. (2017) · Advanced Materials · doi:10.1002/adma.201701627 · Cited by 483
Cited by
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
Luo, L., Zhang, F., Wang, L., Liu, Y., & Leng, J. (2024) · Advanced Functional Materials · doi:10.1002/adfm.202312036 · Cited by 264
Self-citation
Metadata
- Authors
- Zeng, C., Liu, L., Bian, W., Liu, Y., & Leng, J.
- Venue
- Composites Part B: Engineering
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 194
- Pages
- 108034
- ISSN
- 1359-8368 (ISSN-L)
- OpenAlex
- W3015314914
- Cited by
- 200
- References
- 2
- FWCI
- 10.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 4D printed electro-induced continuous carbon fiber reinforced shape memory polymer composites with excellent bending resistance. https://app.cochat.ai/papers/10.1016/j.compositesb.2020.108034
- The paper
- Zeng, C., Liu, L., Bian, W., Liu, Y., & Leng, J. (2020). 4D printed electro-induced continuous carbon fiber reinforced shape memory polymer composites with excellent bending resistance. Composites Part B: Engineering. https://doi.org/10.1016/j.compositesb.2020.108034
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.