Natural hemp fiber reinforced polybenzoxazine composites: Curing behavior, mechanical and thermal properties

The Halpin‐Tsai equations: A review

Affdl, J. C. H., & Kardos, J. L. (1976) · Polymer Engineering & Science · doi:10.1002/pen.760160512 · Cited by 3,071

Effect of Water Absorption on the Mechanical Properties of Hemp Fibre Reinforced Unsaturated Polyester Composites

DHAKAL, H., ZHANG, Z., & RICHARDSON, M. (2007) · Composites Science and Technology · doi:10.1016/j.compscitech.2006.06.019 · Cited by 1,622

Phenolic materials via ring‐opening polymerization: Synthesis and characterization of bisphenol‐A based benzoxazines and their polymers

Ning, X., & Ishida, H. (1994) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1994.080320614 · Cited by 969

Characterization of natural fiber surfaces and natural fiber composites

Sgriccia, N., Hawley, M. C., & Misra, M. (2008) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2008.07.007 · Cited by 954

Dynamic mechanical analysis of banana fiber reinforced polyester composites

Pothan, L. A., Oommen, Z., & Thomas, S. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(02)00254-3 · Cited by 925

Physical and mechanical characterization of near-zero shrinkage polybenzoxazines

Ishida, H., & Allen, D. J. (1996) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/(sici)1099-0488(19960430)34:6<1019::aid-polb1>3.0.co;2-t · Cited by 793

Stiffness predictions for unidirectional short-fiber composites: Review and evaluation

Tucker, C. L., & Liang, E. W. (1999) · Composites Science and Technology · doi:10.1016/s0266-3538(98)00120-1 · Cited by 748

Hemp fiber and its composites – a review

Shahzad, A. (2012) · Journal of Composite Materials · doi:10.1177/0021998311413623 · Cited by 687

A review of bast fibres and their composites. Part 1 – Fibres as reinforcements

Summerscales, J., Dissanayake, N. P. J., Virk, A. S., & Hall, W. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.06.001 · Cited by 683

The influence of fibre treatment on the performance of coir-polyester composites

Rout, J., Misra, M., Tripathy, S. S., Nayak, S. K., & Mohanty, A. K. (2001) · Composites Science and Technology · doi:10.1016/s0266-3538(01)00021-5 · Cited by 569

Intense shear induced caterpillar-like continuous hierarchical fiber enhanced poly(butylene succinate) biocomposite towards strong mechanical performance

Zhao, L., Hu, L., Lin, P., Qiao, Y., Han, Q., Huang, S., Zhang, B., Yin, X., Wu, J., Yang, F., et al. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108273 · Cited by 11

Computational modelling and analysis of thermoacoustic behaviour of carbon nanotube-reinforced plant fibre epoxy composite – An extensive review

Satankar, R. K., Sharma, N., Katariya, P. V., Kumar, V., Dewangan, H. C., Pal, A., & Panda, S. K. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.106717 · Cited by 11

Effect of Nano-filler on the Manufacturing and Properties of Natural Fiber-based Composites: A Review

Rabbi, M. S., Das, S., Tasneem, T., Billah, M. M., & Hasan, A. (2023) · Journal of Engineering Advancements · doi:10.38032/jea.2023.04.001 · Cited by 10

Impact of sodium bicarbonate treatment of waste hemp fibers on the properties of dicyanate ester of bisphenol-A/bisphenol-A-based benzoxazine resin composites

Zegaoui, A., Zhang, H., Derradji, M., Dayo, A. Q., Cai, W.-A., Zhang, L., Wang, J., Medjahed, A., Ghouti, H. A., & Liu, W. (2019) · Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications · doi:10.1177/1464420719830431 · Cited by 10

Development of fiberboard panels manufactured from reclaimed cement bags

Sales, D. D. C., Cabral, A. E. B., & Medeiros, M. S. (2020) · Journal of Building Engineering · doi:10.1016/j.jobe.2020.101525 · Cited by 10

Enhancing performances of hemp fiber/natural rubber composites via polyhydric hyperbranched polyester

Shen, Z. Y., Song, W., Li, X., Yang, L., Wang, C., Hao, Z., & Luo, Z. (2021) · Journal of Polymer Engineering · doi:10.1515/polyeng-2020-0331 · Cited by 10

Influences of Chemical Functionalities on Crystal Structures and Electrochemical Properties of Dihydro-benzoxazine Dimer Derivatives

Suetrong, N., Chansaenpak, K., Impeng, S., Pinyou, P., Blay, V., Blay-Roger, R., Lisnund, S., Kanjanaboos, P., Hanlumyuang, Y., Wannapaiboon, S., et al. (2021) · Crystals · doi:10.3390/cryst11080979 · Cited by 10

Preparation and flame retardancy of flax fabric/polybenzoxazine laminates

Samyn, F., Murariu, O., Bonnaud, L., & Duquesne, S. (2020) · Fire and Materials · doi:10.1002/fam.2839 · Cited by 10

Tensile and flexural properties of woven carbon-kenaf fiber reinforced epoxy matrix hybrid composite: Effect of hybridization and stacking sequences

Yusuff, I., Sarifuddin, N., Norbahiyah, S., Ali, A. M., & Ismail, H. (2020) · AIP conference proceedings · doi:10.1063/5.0015682 · Cited by 9

Hybrids from silazane and allyl‐containing benzoxazine for low‐curing temperature and high‐flame retardance

Ai, T., Zhang, Y., Zhong, D., Yang, Z., Zong, J., & Niu, Y. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51801 · Cited by 9

Delignification’s effect on microcrystalline cellulose obtained from oil palm empty fruit bunch fibres

Norazli, N., Rawi, N. F. M., Owolabi, F. A. T., Kassim, M. H. M., & Jawaid, M. (2023) · BioResources · doi:10.15376/biores.18.1.1901-1915 · Cited by 9

Constitutive models to predict the mechanical performance of sansevieria cylindrica reinforced vinyl ester composite

Johnson, R. D. J., Arumugaprabu, V., & Munde, Y. S. (2019) · Materials Research Express · doi:10.1088/2053-1591/ab2e90 · Cited by 9

Pinecone particles filled polybenzoxazine composites: Thermomechanical and mechanical properties

Nawaz, I. R., Wang, T., Gorar, A. A. K., Soomro, A. G., Sami, S. K., Shah, A. H., Wang, J., Liu, W., Sultan, S. H., Babar, A. A., et al. (2021) · Journal of Applied Polymer Science · doi:10.1002/app.51279 · Cited by 8

Modelling of manufacturing parameters and characterisation on the mechanical properties of sunn hemp (Crotalaria juncea L.) bio-composites with different fibre forms

Olatunbosun, B., Manalo, A. C., Aravinthan, T., Chen, G., & Kiriella, S. (2025) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2025.142349 · Cited by 8

Artificial neural network prediction of thermal and mechanical properties for Bi2O3‐polybenzoxazine nanocomposites

Hassan, M. A., Derradji, M., Ali, M. M. M., Rawashdeh, A. A. M., Wang, J., Pan, Z., & Liu, W. (2022) · Journal of Applied Polymer Science · doi:10.1002/app.52774 · Cited by 8

Cure behavior and compatibilization of epoxide hyperbranched polyurethane on silica/benzoxazine blend

Zhang, C., Lei, Z., Zhang, J., Wang, Y., & Liu, Y. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.46879 · Cited by 8

Crystalline behavior and rheological behavior of polylactide/sisal fiber biocomposites via in‐situ reaction with epoxy‐functionalized oligomer and poly (butylene‐adipate‐terephthalate)

Lei, J., Wu, H., & Hao, M. (2025) · Polymer Composites · doi:10.1002/pc.29697 · Cited by 7

Thermal and Morphological Analyses of Polymer Matrix Composites

Devaraju, S., Arumugam, H., Krishnasamy, B., & Alagar, M. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-819724-0.00053-7 · Cited by 7

Determination of optimum production and 3D printer application temperatures for hemp fiber reinforced polycarbonate composites

Engin, I. C., Alp, N. Ç., & Aytaç, A. (2024) · Polymer Composites · doi:10.1002/pc.28769 · Cited by 6

An investigation on thermal and chemical behavior of jute/hemp/flax fiber reinforced woven composites and its hybrids

Chaudhary, V. K., Das, P. P., Sahu, R., Srinivas, K., & Dwivedi, V. K. (2021) · Journal of Engineering Research · doi:10.36909/jer.iccemme.15753 · Cited by 6

Combined effects of interface modification and nano‐reinforcement via nano‐enhanced interphase in hybrid‐fabric composites for tribological applications

Yuan, J., Zhang, Z., Yang, M., Wu, L., Li, P., Guo, F., Men, X., & Liu, W. (2019) · Polymer Composites · doi:10.1002/pc.25199 · Cited by 6

Effect of Dispersant Agent Content on the Properties of Composites Based on Poly (Lactic Acid) and Alfa Fiber

Ibrahim, H., Boukerrou, A., & Hammiche, D. (2021) · Macromolecular Symposia · doi:10.1002/masy.202000266 · Cited by 6

Bio‐Silica Reinforced Cardanol‐Vanillin Based Polybenzoxazine Composites for Thermal, Hydrophobic and Corrosion Resistant Applications

Selvi, M., Devaraju, S., Kumaravel, A., Kumar, A., & Alagar, M. (2025) · Polymer Composites · doi:10.1002/pc.70499 · Cited by 5

Biodegradable Polymer Composite Films for Green Packaging Applications

Dixit, S., & Yadav, V. L. (2021) · Springer eBooks · doi:10.1007/978-3-030-36268-3_157 · Cited by 5

Lightweight composites, important properties and applications

Dhakal, H. N., & Ismail, S. O. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-818316-8.00006-2 · Cited by 5

A new p-cresol-bisphenol based hybrid polybenzoxazine composites for high-k dielectrics: The role of Palmyra sprout carbon activation

Devaraj, P., Ramachandran, S., Govindaraju, N., & Muthukaruppan, A. (2025) · European Polymer Journal · doi:10.1016/j.eurpolymj.2025.114234 · Cited by 4

Properties and performance of natural cellulosic fiber-reinforced polybenzoxazine composites as corrosion inhibitors under saline conditions

Devi, S. M., Madhavan, D., Jeyasubramanian, K., Vimalraj, A., & Antony, R. (2025) · Colloids and Surfaces A Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2025.138506 · Cited by 4

Thermal Properties of Flax Fiber Hybrid Composites

Santulli, C. (2021) · Wiley eBooks · doi:10.1002/9783527831562.ch6 · Cited by 4

Experimental investigation of structural stabilization in Sunn Hemp fiber and its influence on flexural, tensile, electrical properties of reinforced composite

Dash, C., & Bisoyi, D. K. (2022) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-022-08248-z · Cited by 4

Reinforced Polymers with Natural FiberPreprint

Rolón, B. G., & Cruz, J. N. (2024) · Preprints.org · doi:10.20944/preprints202405.0757.v1 · Cited by 4

Development of High‐Performance Ablative Composites: Synergistic Effects of Alumina Particles and Silica Fabric in the Polybenzoxazine Matrix

Küçük, İ. E., Telli, A. H., & Çınar, S. (2025) · Polymer Composites · doi:10.1002/pc.30093 · Cited by 3

Matamata (Lecythis idatimon): A novel lighter cost-effective amazonian fiber for eco-friendly composite applications in furniture design

Rosa, D. L. S., Nascimento, D. D. C. B., Lopes, F. P. D., Simonassi, N. T., Monteiro, S. N., da Silva, A. C. R., & Cândido, V. S. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.08.221 · Cited by 3

Thermal and viscoelastic properties of a bilayer woven kenaf fabric/oil palm EFB mat epoxy hybrid composites

Hanan, F., Sarmin, S. N., Ismail, A. S., Jawaid, M., Fouad, H., & Azeem, M. A. (2024) · Cellulose · doi:10.1007/s10570-024-06239-3 · Cited by 3

Utilization of Agro-waste as a Reinforcement Material in Polymer Matrix for Biodegradable Packaging Applications

Gautam, S. B., Dixit, S., Yadav, V. L., Mishra, G., Sawood, G. M., & Singh, N. (2024) · Clean Energy Production Technologies · doi:10.1007/978-981-97-0840-6_8 · Cited by 3

Experimental investigation on the tensile, flexural, and thermal rigidity of ALON-reinforced Kevlar fabric-impregnated epoxy composites

Chenrayan, V., Shahapurkar, K., Muthusamy, S. C., Shanmugam, S. K., Zewdu, G. A., Arulraj, A., Soudagar, M. E. M., Fouad, Y., & Murthy, H. C. A. (2024) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-024-14088-4 · Cited by 3

Potential of Different Types of Biocomposites for Health Treatment: Synthesis and Applications

Chaudhary, K., & Rajora, A. (2024) · Nanostructure science and technology · doi:10.1007/978-3-031-74356-6_12 · Cited by 2

Benzoxazine-based innovations in shielding: enhancing durability and protection in electronics and clothing

Arishi, A. A. M., Alamry, K. A., & Hussein, M. A. (2026) · Designed Monomers & Polymers · doi:10.1080/15685551.2026.2664957 · Cited by 2

Biodegradable Polymer Composite Films for Green Packaging Applications

Dixit, S., & Yadav, V. L. (2020) · Springer eBooks · doi:10.1007/978-3-030-11155-7_157-1 · Cited by 2

Agrofiber nanocomposites for industrial applications

Gapusan, R. B., Aquino, C. L. E., Dahonog, L. A., Rezaga, B. F. Y., & Balela, M. D. L. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-821497-8.00008-3 · Cited by 2

Enhanced morphological and thermal properties of epoxy composites reinforced with Palm and Prosopis Juliflora fibers

Anandavelu, K., & Ezhilarasan, C. (2024) · Physica Scripta · doi:10.1088/1402-4896/ad7106 · Cited by 2

Sustainable Aqueous‐Based Poly(Geo‐Benzoxazine) Composites for High‐ k Dielectrics

Devaraj, P., Ramachandran, S., Mathimani, J., & Muthukaruppan, A. (2025) · Journal of Applied Polymer Science · doi:10.1002/app.57414 · Cited by 2

Effect of Interfacial Bonding Characteristics on Fatigue Behavior of Hemp Fibre Reinforced Polymer Composites

Fahmi, F. F., Mahdi, T. H., Ferdousi, U. S., Uddin, M. B., Sarker, M. E., & Syduzzaman, M. (2024) · Composites science and technology · doi:10.1007/978-981-99-8327-8_9 · Cited by 2

Achieving low-temperature curing and high mechanical performance in benzoxazines via multi-scale synergy

Chen, F., Wang, M., Hao, X., Zhang, L., Wang, A., Xia, Z., Yin, L., & Wang, Z. (2026) · European Polymer Journal · doi:10.1016/j.eurpolymj.2026.114603 · Cited by 1

Green Composite Film Synthesized from Agricultural Waste for Packaging Applications

Dixit, S., & Yadav, V. L. (2021) · Materials horizons · doi:10.1007/978-981-15-9643-8_16 · Cited by 1

Development of hybrid natural/synthetic fiber reinforced polymer composite of recurve bow riser for Malaysian junior athletes

Ayuni, F. F. (2018) · UMP Institutional Repository (Universiti Malaysia Pahang)

Chemical modification of cellulose fiber surface

Rajeshkumar, G., Nagaraja, K. C., & Hariharan, V. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-90125-3.00001-x

Performance and durability of lightweight and sustainable materials

Ramesh, P., Mohit, H., Rangappa, S. M., Siengchin, S., & Vamsikrishna, V. (2023) · Elsevier eBooks · doi:10.1016/b978-0-323-95189-0.00012-3

Dynamic Characteristics of Damaged Hybrid Composite (Luffa-CNT): Theoretical and Experimental Verification

Guru, K., Patel, B., & Bohidar, S. K. (2024) · Journal of Vibration Engineering & Technologies · doi:10.1007/s42417-024-01356-6

Deflection responses of damaged hybrid (carbon nanotubes – luffa) composite structure: An experimental verification

Patel, B., Guru, K., & Bohidar, S. K. (2025) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.202400119

Advanced Characterization of Natural Fiber Composites Using Digital Image CorrelationPreprint

Kotaru, S. D. (2025) · Research Square · doi:10.21203/rs.3.rs-5995266/v1

O efeito de diferentes condições de cura na fluência de compósitos unidirecionais de sisal/epóxi

Teixeira, L. A. (2023) · RIUnB Institutional Repository (University of Brasília)

Towards greener thermosets : cardanol-based polybenzoxazines and dialdehyde cellulose based composites

Ganfoud, R. (2018) · theses.fr (ABES) · doi:10.70675/df203f3dz9c85z4ee5z9494z0198b6bee34e

Modification of Hemp Fibers Under UV Irradiation With Nano-TiO2

Yiğit, İ., Özenç, A. A., & Eren, S. (2026) · Springer Proceedings in Materials · doi:10.1007/978-3-032-20865-1_3

Self-bonded coconut shell biocomposites for sustainable applications

Harock, J. A., Faheem, M. V., Manoj, P., Varghese, S., & Kumar, C. N. S. (2026) · Journal of Thermoplastic Composite Materials · doi:10.1177/08927057261453887

Lignin migration-driven construction of reed fibers with phosphate-rich interphases and their application in flame-retardant PLA composites

Li, M., Huang, Y., Li, X., Wu, Y., & Zuo, Y. (2026) · Advanced Composites and Hybrid Materials · doi:10.1007/s42114-026-02025-w

Toward sustainable insulation materials: Properties of hemp fiber-based composites

Metanawin, S., Thongsalee, A., Sonthisombat, A., Poomfuang, K., & Metanawin, T. (2026) · Results in Materials · doi:10.1016/j.rinma.2026.101031

Mechanical and Dynamic-Mechanical Performance of Sustainable Composites Reinforced with Sisal Fibers

Macedo, M. D. S. (2026) · RIUnB Institutional Repository (University of Brasília)

“Advancements in Natural Fiber-Reinforced Polymer Composites: Resources, Classification, Fabrication, and Characteristics for Environmental Sustainability”

Kumar, P., Kumar, R., & Mishra, R. K. (2026) · Lecture notes in mechanical engineering · doi:10.1007/978-981-95-2298-9_7

Reinforcement of waste hemp fibres in aromatic diamine-based benzoxazine thermosets for the enhancement of mechanical and thermomechanical properties

Dayo, A. Q., Xu, Y., Zegaoui, A., Aftab, A., Wang, J., Zhang, L., Liu, W., & Shah, A. H. (2017) · Plastics Rubber and Composites Macromolecular Engineering · doi:10.1080/14658011.2017.1386366 · Cited by 30

The influence of different chemical treatments on the hemp fiber/polybenzoxazine based green composites: Mechanical, thermal and water absorption properties

Dayo, A. Q., Zegaoui, A., Aftab, A., Kiran, S., Wang, J., Derradji, M., Cai, W.-A., & Liu, W. (2018) · Materials Chemistry and Physics · doi:10.1016/j.matchemphys.2018.06.040 · Cited by 91

Morphological, thermal and mechanical properties of benzoxazine resin reinforced with alkali treated alfa fibers

Bessa, W., Trache, D., Derradji, M., & Tarchoun, A. F. (2021) · Industrial Crops and Products · doi:10.1016/j.indcrop.2021.113423 · Cited by 45

Effect of Curing Temperature on the Mechanical Properties of Hemp Fiber Reinforced Polymer Composites

Pulleti, S. S., & Singh, S. B. (2024) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-023-08680-1 · Cited by 17

Morphological, mechanical and thermal properties of cyanate ester/benzoxazine resin composites reinforced by silane treated natural hemp fibers

Zegaoui, A., Ma, R.-K., Dayo, A. Q., Derradji, M., Wang, J., Liu, W.-B., Xu, Y., & Cai, W. (2018) · Chinese Journal of Chemical Engineering · doi:10.1016/j.cjche.2018.01.008 · Cited by 55