The DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Characteristics of mortar and concrete containing fine aggregate manufactured from recycled waste polyethylene terephthalate bottles
Open accessAbstract
This paper presents the development of lightweight aggregate concrete using fine aggregate that is manufactured from recycled waste polyethylene terephthalate (PET) bottles. Investigations on waste PET lightweight aggregate concrete included three phases: examination of the properties of waste PET lightweight aggregates (WPLA), analysis of the properties of mortar when WPLA was used as fine aggregate, and analysis of the properties of concrete when WPLA was used as fine aggregate. The results of the first phase showed that the WPLA had a density of 1390 kg/m3, a water absorption of 0% and a bulk density of 844 kg/m3. WPLA fineness modulus (F.M.), however, was 4.11, which is higher than the F.M. of river sand. This is because the WPLA was single graded. The results of the second phase showed that for the mortar, in which the WPLA was used as a fine aggregate, the flow value increased, while the compressive strength decreased proportionally to the addition of WPLA with elapsed time. In addition, the amount of water absorption by unit area was higher than for the control mortar (without WPLA) when the WPLA content was either 40% or 60%. For the third phase, the results showed that the slump of the WPLA concrete increased as the WPLA content increased regardless of the water-cement ratio (W/C). In comparison to the control concrete, the 28-day WPLA concrete compressive strength decreased by 5%, 15% and 30%, with an increase of WPLA content of 25%, 50% and 75%, respectively. In addition, for a W/C of 0.49, the structural efficiency (compressive strength/density ratio) of the concrete containing 25% of WPLA was higher than that for the control concrete.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Development of recycled PET fiber and its application as concrete-reinforcing fiber
Tsuneo, O. C. H. I., OKUBO, S., & FUKUI, K. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2007.02.002 · Cited by 431
Optimization on proportion for recycled aggregate in concrete using two-stage mixing approach
Tam, V. W. Y., Tam, C. M., & Wang, Y. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.05.040 · Cited by 294
Characteristics and properties of lightweight concrete manufactured with cenospheres
Blanco, F., Garcı́a, P., Mateos, P., & Ayala, J. (2000) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00357-4 · Cited by 248
High-strength lightweight concrete made with scoria aggregate containing mineral admixtures
Kılıç, A., Atiş, C. D., Yaşar, E., & Özcan, F. (2003) · Cement and Concrete Research · doi:10.1016/s0008-8846(03)00131-5 · Cited by 196
Pacheco-Torgal, F., Castro-Gomes, J. P., & Jalali, S. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.10.005 · Cited by 192
Strength properties of lightweight concrete made with basaltic pumice and fly ash
Yaşar, E., Atiş, C. D., Kılıç, A., & Gulsen, H. (2003) · Materials Letters · doi:10.1016/s0167-577x(03)00146-0 · Cited by 185
A water sorptivity test for martar and concrete
Sabir, B. B., Wild, S., & O’Farrell, M. (1998) · Materials and Structures · doi:10.1007/bf02481540 · Cited by 164
Water movement in porous building materials—VII. The sorptivity of mortars
Hall, C., & Tse, T. K.-M. (1986) · Building and Environment · doi:10.1016/0360-1323(86)90017-x · Cited by 156
Mechanical properties of polymer-modified lightweight aggregate concrete
Rossignolo, J. A., & Agnesini, M. V. C. (2002) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00678-0 · Cited by 149
Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete
Lo, T. Y., Cui, H., & Li, Z. G. (2003) · Waste Management · doi:10.1016/j.wasman.2003.06.003 · Cited by 146
Effects of artificial lightweight aggregate on autogenous shrinkage of concrete
Kohno, K., Okamoto, T., Isikawa, Y., Sibata, T., & Mori, H. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00202-6 · Cited by 145
Cited by
Use of recycled plastics in concrete: A critical review
Gu, L., & Ozbakkaloglu, T. (2016) · Waste Management · doi:10.1016/j.wasman.2016.03.005 · Cited by 727
Use of plastic waste as aggregate in cement mortar and concrete preparation: A review
Saikia, N., & de Brito, J. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.066 · Cited by 709
Saikia, N., & de Brito, J. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.11.049 · Cited by 528
Recycling of PET bottles as fine aggregate in concrete
Frigione, M. (2010) · Waste Management · doi:10.1016/j.wasman.2010.01.030 · Cited by 528
Pacheco-Torgal, F., Ding, Y., & Jalali, S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.11.047 · Cited by 482
Metadata
- Authors
- Choi, Y. W., Moon, D. J., Kim, Y. J., & Lachemi, M.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2009-08
- Volume
- 23
- Issue
- 8
- Pages
- 2829-2835
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2012102428
- Cited by
- 346
- References
- 11
- FWCI
- 16.48
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.