The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Compressive behavior of steel fiber reinforced recycled aggregate concrete after exposure to elevated temperatures
Open accessAbstract
Abstract For sustainability considerations, the use of recycled aggregate in concrete has attracted many interests in the research community. One of the main concerns for using such concrete in buildings is its spalling in fire. This may be alleviated by adding steel fibers to form steel fiber reinforced recycled aggregate concrete (SFRAC). This paper presents an experimental investigation into the compressive properties of SFRAC cylinders after exposure to elevated temperatures, including the compressive strength, Young’s modulus (stiffness), stress–strain curve and energy absorption capacity (toughness). The effects of two parameters, namely steel fiber volume content (0%, 0.5%, 1%, 1.5%) and temperature (room temperature, 200 °C, 400 °C and 600 °C) on the compressive mechanical properties of concrete were investigated. The test results show that both compressive strength and stiffness of the concrete are significantly reduced after exposure to high temperatures. The addition of steel fibers is helpful in preventing spalling, and significantly improves the ductility and the cracking behavior of recycled aggregate concrete (RAC) after exposure to high temperatures, which is favorable for the application of RAC in building construction.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical properties of recycled aggregate concrete under uniaxial loading
Xiao, J., Li, J., & Zhang, C. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.09.020 · Cited by 1,175
An overview of study on recycled aggregate concrete in China (1996–2011)
Xiao, J., Li, W., Fan, Y., & Huang, X. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.12.074 · Cited by 1,101
Microstructural analysis of recycled aggregate concrete produced from two-stage mixing approach
Tam, V. W. Y., Gao, X. F., & Tam, C. M. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.10.025 · Cited by 997
Brandt, A. M. (2008) · Composite Structures · doi:10.1016/j.compstruct.2008.03.006 · Cited by 924
Performance of concrete made with commercially produced coarse recycled concrete aggregate
Sagoe-Crentsil, K. K., Brown, T., & Taylor, A. H. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(00)00476-2 · Cited by 772
High-temperature behaviour of HPC with polypropylene fibres
Kalifa, P., Chéné, G., & Gallé, C. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00596-8 · Cited by 752
Influence of recycled aggregates on mechanical properties of HS/HPC
Ajdukiewicz, A., & Kliszczewicz, A. (2002) · Cement and Concrete Composites · doi:10.1016/s0958-9465(01)00012-9 · Cited by 678
Enhancing the durability properties of concrete prepared with coarse recycled aggregate
Kou, S. C., & Poon, C. S. (2012) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2012.02.032 · Cited by 631
Effect of aspect ratio and volume fraction of steel fiber on the mechanical properties of SFRC
Yazıcı, Ş., İnan, G., & Tabak, V. (2007) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.05.025 · Cited by 599
Poon, C.-S., Azhar, S., Anson, M., & Wong, Y.-L. (2001) · Cement and Concrete Research · doi:10.1016/s0008-8846(01)00580-4 · Cited by 521
Poon, C. S., Shui, Z. H., & Lam, L. (2004) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.02.011 · Cited by 455
Use of recycled aggregates in molded concrete bricks and blocks
Poon, C. S., Kou, S.-C., & Lam, L. (2002) · Construction and Building Materials · doi:10.1016/s0950-0618(02)00019-3 · Cited by 443
Effect of high temperatures on high performance steel fibre reinforced concrete
Lau, A., & Anson, M. (2006) · Cement and Concrete Research · doi:10.1016/j.cemconres.2006.03.024 · Cited by 403
Kou, S.-C., Poon, C. S., & Etxeberria, M. (2010) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2010.10.003 · Cited by 393
An experimental study on the tensile strength of steel fiber reinforced concrete
Olivito, R. S., & Zuccarello, F. A. (2010) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2009.12.003 · Cited by 385
Recycling and reuse of waste concrete in China
Li, X. (2008) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2008.09.006 · Cited by 369
Properties of steel fibrous concrete containing mixed fibres in fresh and hardened state
Mohammadi, Y., Singh, S. P., & Kaushik, S. K. (2008) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2006.12.004 · Cited by 327
Effect of Temperature on Thermal Properties of High-Strength Concrete
Kodur, V. K. R., & Sultan, M. A. (2003) · Journal of Materials in Civil Engineering · doi:10.1061/(asce)0899-1561(2003)15:2(101 · Cited by 311
Tai, Y.-S., Pan, H.-H., & Kung, Y.-N. (2011) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2011.04.008 · Cited by 292
Study on concrete at high temperature in China—an overview
Xiao, J., & König, G. (2004) · Fire Safety Journal · doi:10.1016/s0379-7112(03)00093-6 · Cited by 291
Experimental behaviour of recycled aggregate concrete filled steel tubular columns
Yang, Y.-F., & Han, L. (2006) · Journal of Constructional Steel Research · doi:10.1016/j.jcsr.2006.02.010 · Cited by 281
Savva, A., Manita, P., & Sideris, K. K. (2005) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2004.02.013 · Cited by 280
Application of recycled coarse aggregate by mixture to concrete construction
Eguchi, K., Teranishi, K., Nakagome, A., Kishimoto, H., Shinozaki, K., & NARIKAWA, M. (2006) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2005.12.023 · Cited by 275
Properties of concrete made with recycled crushed glass at elevated temperatures
Terro, M. J. (2005) · Building and Environment · doi:10.1016/j.buildenv.2005.02.018 · Cited by 240
Mechanical properties of confined recycled aggregate concrete under axial compression
Xiao, J., Huang, Y., Yang, J., & Zhang, C. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.06.062 · Cited by 237
Post-fire residual mechanical properties of concrete made with recycled concrete coarse aggregates
Vieira, J. P. B., Correia, J. R., & de Brito, J. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.02.002 · Cited by 235
Experimental study on the failure mechanism of recycled concrete
Liu, Q., Xiao, J., & Sun, Z. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.06.007 · Cited by 214
Recycled concrete made with different natural coarse aggregates exposed to high temperature
Zega, C. J., & Di Maio, A. A. (2009) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2008.08.017 · Cited by 171
Recycling and reuse of waste concrete in China
Xu-ping, L. (2009) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2008.11.005 · Cited by 152
Strengthening fire-damaged concrete by confinement with fibre-reinforced polymer wraps
Bisby, L., Chen, J. F., Li, S. Q., Stratford, T. J., Cueva, N., & Crossling, K. (2011) · Engineering Structures · doi:10.1016/j.engstruct.2011.07.002 · Cited by 150
Self-citation06/02300 Properties of concrete made with recycled crushed glass at elevated temperatures
(2006) · Fuel and Energy Abstracts · doi:10.1016/s0140-6701(06)82308-8 · Cited by 136
Recycled concrete exposed to high temperatures
Zega, C. J., & Maio, Á. A. D. (2006) · Magazine of Concrete Research · doi:10.1680/macr.2006.58.10.675 · Cited by 135
Erdem, S., Dawson, A. R., & Thom, N. H. (2011) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2011.04.037 · Cited by 92
Fire Damage and Residual Strengths of Recycled Aggregate Concrete
Xiao, J. Z., & Zhang, C. Z. (2007) · Key engineering materials · doi:10.4028/www.scientific.net/kem.348-349.937 · Cited by 64
Cited by
Akhtar, A., & Sarmah, A. K. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.03.085 · Cited by 1,250
A Comprehensive Review on Recycled Aggregate and Recycled Aggregate Concrete
Wang, B., Yan, L., Fu, Q., & Kasal, B. (2021) · Resources, Conservation and Recycling · doi:10.1016/j.resconrec.2021.105565 · Cited by 999
A review of mechanical properties of fibre reinforced concrete at elevated temperatures
Wu, H., Lin, X., & Zhou, A. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106117 · Cited by 328
Metadata
- Authors
- Chen, G. M., He, Y. H., Yang, H., Chen, J. F., & Guo, Y. C.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2014-11
- Volume
- 71
- Pages
- 1-15
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W1967650499
- Cited by
- 270
- References
- 34
- FWCI
- 17.26
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.