The DOI matches its Crossref record.
Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete
Abstract
This study aims to examine the feasibility of using steel fibers and carbon nanotubes (CNTs) on developing self-sensing ultra-high-performance concrete (UHPC). For this, four steel fiber types with two different shapes (straight vs. twisted) and three different aspect ratios from 65 to 100 were considered at a fiber volume fraction of 2%. 0.5% by volume of CNTs were simultaneously added. A plain UHPC with only 0.5% CNTs was also fabricated and tested as a control specimen. Test results indicated that the addition of 2% steel fibers was effective in enhancing compressive strength, elastic modulus, tensile strength, and strain capacity of the plain UHPC. The compressive behaviors of UHPC and ultra-high-performance fiber-reinforced concrete (UHPFRC) with CNTs were not predicted based on a fractional change in resistance (FCR) measurement, whereas the total tensile behaviors in terms of both stress-strain and stress-crack opening displacement (COD) curves were quite well simulated based on the FCR measurement and curve-fitting equations suggested. The unintended noise in the FCR of the plain UHPC was largely mitigated by adding the steel fibers, while the highest gauge factor (GF) under tensile load was found for the plain UHPC with CNTs. Using micro steel fibers was more effective in increasing the GF than using macro steel fibers, and better predictive results were obtained for the UHPFRC with straight steel fibers as compared to that with twisted steel fibers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
New development of ultra-high-performance concrete (UHPC)
Du, J., Meng, W., Khayat, K. H., Bao, Y., Guo, P., Lyu, Z., Abu-obeidah, A., Nassif, H., & Wang, H. (2021) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2021.109220 · Cited by 1,013
Jung, M., Lee, Y.-S., Hong, S.-G., & Moon, J. (2020) · Cement and Concrete Research · doi:10.1016/j.cemconres.2020.106017 · Cited by 348
Nanomaterials in ultra-high-performance concrete (UHPC) – A review
Yoo, D.-Y., Oh, T., & Banthia, N. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104730 · Cited by 260
Self-citation
Metadata
- Authors
- Lee, S. H., Kim, S., & Yoo, D.-Y.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 185
- Pages
- 530-544
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2883432616
- Cited by
- 167
- References
- 0
- FWCI
- 3.02
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete. https://app.cochat.ai/papers/10.1016/j.conbuildmat.2018.07.071
- The paper
- Lee, S. H., Kim, S., & Yoo, D.-Y. (2018). Hybrid effects of steel fiber and carbon nanotube on self-sensing capability of ultra-high-performance concrete. Construction and Building Materials. https://doi.org/10.1016/j.conbuildmat.2018.07.071
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.