The DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
A review on microstructural study and compressive strength of geopolymer mortar, paste and concrete
Abstract
The utmost priority in reducing the usage of ordinary Portland cement (OPC) while replicating the cementitious properties by utilizing industrial by-products in construction materials is seriously undertaken by many researchers. The technology of geopolymerization that utilizes materials and activator solution to form geopolymer matrix could lead to alleviate some of the issues related to OPC based concrete. Numerous experiments have established that geopolymer concrete has higher compressive strength, higher acid resistivity and lower shrinkage than ordinary concrete. This review article focusses on the microstructure analyses of the geopolymer specimens and comparison of geopolymers with various binders. The review analysis of various binders used and their microstructural investigations reveal that different molarity of sodium hydroxide or phosphoric acid solution, liquid-to-binder ratio, curing temperature and duration yield geopolymers of diverse properties. Most of the geopolymer products revealed a wide hump in the XRD analysis due to the amorphous structure of aluminosilicate. Investigation of MIP and Micro CT reveals that aged geopolymer has a denser matrix arrangement and produce high compressive strength. Geopolymerization prevents interconnectivity of micropores due to the formation of denser matrix of geopolymer gel. Generally, the use of 12M of sodium hydroxide solution, low liquid-to-binder ratio of about 0.4 and curing temperature at approximately 70 °C for at least 24 h produced high strength geopolymers. The binders mixed with lower sodium silicate to sodium hydroxide mass ratio of 2.0–2.5 tend to react more efficiently.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geopolymers: Inorganic polymeric new materials
Davidovits, J. (1991) · Journal of Thermal Analysis · doi:10.1007/bf01912193 · Cited by 4,251
Palomo, A., Grutzeck, M. W., & Blanco, M. T. (1999) · Cement and Concrete Research · doi:10.1016/s0008-8846(98)00243-9 · Cited by 2,319
Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement
McLellan, B. C., Williams, R. P., Lay, J., van Riessen, A., & Corder, G. D. (2011) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2011.02.010 · Cited by 1,949
Sustainable cement production—present and future
Schneider, M., Romer, M., Tschudin, M., & Bolio, H. (2011) · Cement and Concrete Research · doi:10.1016/j.cemconres.2011.03.019 · Cited by 1,643
Global strategies and potentials to curb CO2 emissions in cement industry
Benhelal, E., Zahedi, G., Shamsaei, E., & Bahadori, A. (2013) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2012.10.049 · Cited by 1,580
Composition and microstructure of alkali activated fly ash binder: Effect of the activator
Fernández-Jiménez, A., & Palomo, A. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2005.03.003 · Cited by 1,144
NaOH-activated ground fly ash geopolymer cured at ambient temperature
Somna, K., Jaturapitakkul, C., Kajitvichyanukul, P., & Chindaprasirt, P. (2011) · Fuel · doi:10.1016/j.fuel.2011.01.018 · Cited by 995
Effect of elevated temperatures on geopolymer paste, mortar and concrete
Kong, D. L. Y., & Sanjayan, J. G. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2009.10.017 · Cited by 985
Geopolymeric materials prepared using Class F fly ash and elevated temperature curing
Bakharev, T. (2005) · Cement and Concrete Research · doi:10.1016/j.cemconres.2004.06.031 · Cited by 946
Workability and strength of coarse high calcium fly ash geopolymer
Chindaprasirt, P., Chareerat, T., & Sirivivatnanon, V. (2007) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2006.11.002 · Cited by 863
Comparative study on the characteristics of fly ash and bottom ash geopolymers
Chindaprasirt, P., Jaturapitakkul, C., Chalee, W., & Rattanasak, U. (2009) · Waste Management · doi:10.1016/j.wasman.2008.06.023 · Cited by 735
Effect of synthesis parameters on the mechanical properties of fly ash-based geopolymers
Panias, D., Giannopoulou, I. P., & Perraki, T. (2007) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2006.12.064 · Cited by 726
PROPERTIES OF GEOPOLYMER CEMENTS
Davidovits, J. (1994) · Cited by 660
Utilisation of fly ash in a geopolymeric material
Swanepoel, J. C., & Strydom, C. A. (2002) · Applied Geochemistry · doi:10.1016/s0883-2927(02)00005-7 · Cited by 642
The effects of inorganic salt contamination on the strength and durability of geopolymers
Lee, W. K. W., & van Deventer, J. S. J. (2002) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/s0927-7757(02)00239-x · Cited by 479
Bernal, S. A., de Gutierrez, R. M., Provis, J. L., & Rose, V. (2010) · Cement and Concrete Research · doi:10.1016/j.cemconres.2010.02.003 · Cited by 473
Effect of Alkali Cations on Aluminum Incorporation in Geopolymeric Gels
Duxson, P., Lukey, G. C., Separovic, F., & van Deventer, J. S. J. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0494216 · Cited by 470
Phoo-ngernkham, T., Chindaprasirt, P., Sata, V., Hanjitsuwan, S., & Hatanaka, S. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.09.049 · Cited by 452
Abdulkareem, O. A., Mustafa Al Bakri, A. M., Kamarudin, H., Khairul Nizar, I., & Saif, A. A. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2013.09.047 · Cited by 419
A mix design procedure for geopolymer concrete with fly ash
Pavithra, P., Srinivasula Reddy, M., Dinakar, P., Hanumantha Rao, B., Satpathy, B. K., & Mohanty, A. N. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.05.041 · Cited by 404
Cao, V. D., Pilehvar, S., Salas-Bringas, C., Szczotok, A. M., Rodríguez, J. F., Carmona, M., Al‐Manasir, N., & Kjøniksen, A. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.11.061 · Cited by 364
Effect of silica fume on the mechanical properties of fly ash based-geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.10.084 · Cited by 363
Behavior of low-calcium fly and bottom ash-based geopolymer concrete cured at ambient temperature
Xie, T., & Ozbakkaloglu, T. (2015) · Ceramics International · doi:10.1016/j.ceramint.2015.01.031 · Cited by 344
Factors influencing the compressive strength of fly ash based geopolymers
Soutsos, M. N., Boyle, A. P., Vinai, R., Hadjierakleous, A., & Barnett, S. J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.11.045 · Cited by 326
Ranjbar, N., Mehrali, M., Alengaram, U. J., Metselaar, H. S. C., & Jumaat, M. Z. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.04.064 · Cited by 321
Self-citationCoal fly ash as raw material for the manufacture of geopolymer-based products
Andini, S., Cioffi, R., Colangelo, F., Grieco, T., Montagnaro, F., & Santoro, L. (2008) · Waste Management · doi:10.1016/j.wasman.2007.02.001 · Cited by 319
Composition design and microstructural characterization of calcined kaolin-based geopolymer cement
Yunsheng, Z., Wei, S., & Zongjin, L. (2010) · Applied Clay Science · doi:10.1016/j.clay.2009.11.002 · Cited by 313
Formation of Ceramics from Metakaolin‐Based Geopolymers. Part II: K‐Based Geopolymer
Bell, J. L., Driemeyer, P. E., & Kriven, W. M. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2008.02922.x · Cited by 299
Geopolymer synthesis using alkaline activation of natural zeolite
Villa, C., Pecina, E. T., Torres, R., & Gómez, L. (2010) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2010.04.052 · Cited by 291
Zawrah, M. F., Gado, R. A., Feltin, N., Ducourtieux, S., & Devoille, L. (2016) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2016.08.001 · Cited by 286
Structural performance of nano-silica modified fly-ash based geopolymer concrete
Adak, D., Sarkar, M., & Mandal, S. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.12.111 · Cited by 264
Ranjbar, N., Mehrali, M., Behnia, A., Alengaram, U. J., & Jumaat, M. Z. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.03.037 · Cited by 263
Self-citationNoushini, A., Aslani, F., Castel, A., Gilbert, R. I., Uy, B., & Foster, S. J. (2016) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2016.07.004 · Cited by 259
Duan, P., Yan, C., Zhou, W., Luo, W., & Shen, C. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.03.009 · Cited by 252
Duan, P., Yan, C., Luo, W., & Zhou, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.12.095 · Cited by 252
Mechanical Properties of Geopolymer Composites Reinforced with Natural Fibers
Korniejenko, K., Frączek, E., Pytlak, E., & Adamski, M. (2016) · Procedia Engineering · doi:10.1016/j.proeng.2016.07.395 · Cited by 240
Tchakouté, H. K., & Rüscher, C. H. (2017) · Applied Clay Science · doi:10.1016/j.clay.2017.02.002 · Cited by 234
Geopolymerisation of low calcium ferronickel slags
Komnitsas, K., Zaharaki, D., & Perdikatsis, V. (2006) · Journal of Materials Science · doi:10.1007/s10853-006-0529-2 · Cited by 232
Use of municipal solid waste incinerator (MSWI) bottom ash in high calcium fly ash geopolymer matrix
Wongsa, A., Boonserm, K., Waisurasingha, C., Sata, V., & Chindaprasirt, P. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.01.147 · Cited by 224
Andrejkovičová, S., Sudagar, A., Rocha, J., Patinha, C., Hajjaji, W., da Silva, E. F., Velosa, A., & Rocha, F. (2016) · Applied Clay Science · doi:10.1016/j.clay.2016.03.009 · Cited by 209
Mechanical properties and durability of volcanic ash based geopolymer mortars
Yankwa Djobo, J. N., Elimbi, A., Kouamo Tchakouté, H., & Kumar, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.141 · Cited by 207
High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber
Ranjbar, N., Mehrali, M., Mehrali, M., Alengaram, U. J., & Jumaat, M. Z. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.228 · Cited by 182
Self-citationLong term permeation properties of different fly ash geopolymer concretes
Gunasekara, C., Law, D. W., & Setunge, S. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.121 · Cited by 181
Mechanical properties of alkali activated flyash/Kaolin based geopolymer concrete
Okoye, F. N., Durgaprasad, J., & Singh, N. B. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.08.009 · Cited by 179
Salih, M. A., Ali, A. A. A., & Farzadnia, N. (2014) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2014.05.031 · Cited by 175
Embong, R., Kusbiantoro, A., Shafiq, N., & Nuruddin, M. F. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.06.058 · Cited by 166
Determining the Reactivity of a Fly Ash for Production of Geopolymer
Chen‐Tan, N. W., Van Riessen, A., LY, C. V., & Southam, D. C. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.02948.x · Cited by 166
A sustainable calcined water treatment sludge and rice husk ash geopolymer
Nimwinya, E., Arjharn, W., Horpibulsuk, S., Phoo-ngernkham, T., & Poowancum, A. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2016.01.060 · Cited by 160
Compressive strength of fly ash-based geopolymer concrete with crumb rubber partially replacing sand
Park, Y., Abolmaali, A., Kim, Y. H., & Ghahremannejad, M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.001 · Cited by 155
Liu, M. Y. J., Alengaram, U. J., Santhanam, M., Jumaat, M. Z., & Mo, K. H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.076 · Cited by 154
Self-citationSynthesis of geopolymer composites from blends of CFBC fly and bottom ashes
Li, Q., Xu, H., Li, F., Li, P., Shen, L., & Zhai, J. (2012) · Fuel · doi:10.1016/j.fuel.2012.02.059 · Cited by 151
Duan, P., Yan, C., Zhou, W., & Ren, D. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.05.059 · Cited by 149
Utilisation of steel furnace slag coarse aggregate in a low calcium fly ash geopolymer concrete
Khan, M. S. H., Castel, A., Akbarnezhad, A., Foster, S. J., & Smith, M. A. (2016) · Cement and Concrete Research · doi:10.1016/j.cemconres.2016.09.001 · Cited by 143
Assaedi, H. S., Shaikh, F. U. A., & Low, I. M. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.049 · Cited by 139
Pilehvar, S., Cao, V. D., Szczotok, A. M., Carmona, M., Valentini, L., Lanzón, M., Pamies, R., & Kjøniksen, A. (2018) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2018.04.016 · Cited by 138
Assi, L. N., Ghahari, S., Deaver, E., Leaphart, D. M., & Ziehl, P. H. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.07.069 · Cited by 133
Duan, P., Yan, C., Zhou, W., & Luo, W. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.02.091 · Cited by 122
Properties of an aged geopolymer synthesized from calcined ore-dressing tailing of bauxite and slag
Ye, J., Zhang, W., & Shi, D. (2017) · Cement and Concrete Research · doi:10.1016/j.cemconres.2017.05.017 · Cited by 104
Effect of different curing temperatures on alkali activated palm oil fuel ash paste
Salih, M. A., Farzadnia, N., Ali, A. A. A., & Demirboğa, R. (2015) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2015.06.052 · Cited by 88
Kovářík, T., Rieger, D., Kadlec, J., Křenek, T., Kullová, L., Pola, M., Bělský, P., Franče, P., & Říha, J. (2017) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2017.03.134 · Cited by 80
Leong, H. Y., Ong, D. E. L., Sanjayan, J., & Nazari, A. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.03.046 · Cited by 77
Zeng, S., & Wang, J. (2016) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2016.06.011 · Cited by 62
Abdulkareem, O. A., & Ramli, M. B. (2015) · Modern Applied Science · doi:10.5539/mas.v9n12p61 · Cited by 40
Cited by
Potential applications of geopolymer concrete in construction: A review
Almutairi, A. L., Tayeh, B. A., Adesina, A., Isleem, H. F., & Zeyad, A. M. (2021) · Case Studies in Construction Materials · doi:10.1016/j.cscm.2021.e00733 · Cited by 481
Zhang, C., Khorshidi, H., Najafi, E., & Ghasemi, M. (2023) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2022.135390 · Cited by 300
John, S. K., Nadir, Y., & Girija, K. (2021) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2021.122443 · Cited by 290
Metadata
- Authors
- Ng, C., Alengaram, U. J., Wong, L. S., Mo, K. H., Jumaat, M. Z., & Ramesh, S.
- Venue
- Construction and Building Materials
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 186
- Pages
- 550-576
- ISSN
- 0950-0618 (ISSN-L)
- OpenAlex
- W2883868296
- Cited by
- 343
- References
- 63
- FWCI
- 21.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.